Determines whether calling addresses should be included or not
Parsed from file x25pad.mib.txt
Company: None
Module: Wellfleet-X25PAD-MIB
Determines whether calling addresses should be included or not
Parsed from file Wellfleet-X25PAD-MIB.mib
Module: Wellfleet-X25PAD-MIB
Vendor: Wellfleet
Module: Wellfleet-X25PAD-MIB
[Automatically extracted from oidview.com]
wfX25PadPortDefaultCfgFullAddressing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines whether calling addresses should be included or not" DEFVAL { enabled } ::= { wfX25PadPortDefaultCfgEntry 40 }
wfX25PadPortDefaultCfgFullAddressing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines whether calling addresses should be included or not" DEFVAL { enabled } ::= { wfX25PadPortDefaultCfgEntry 40 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.12.4.1.1 | wfX25PadPortDefaultCfgDelete | 0 | 0 | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.2 | wfX25PadPortDefaultCfgDisable | 0 | 0 | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.3 | wfX25PadPortDefaultCfgState | 0 | 0 | Current state of X.25 PAD sofware on the I-SDB |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.4 | wfX25PadPortDefaultCfgSlot | 0 | 0 | Instance ID Slot, filled in by ISDB mib gate |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.5 | wfX25PadPortDefaultCfgConnector | 0 | 0 | Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + '… |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.6 | wfX25PadPortDefaultCfgNumber | 0 | 0 | Instance ID Async Port, filled in by ISDB mib gate |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.7 | wfX25PadPortDefaultCfgSubAddress | 0 | 0 | Subaddress portion of an X.121 address that is used by an application and is transparent to the network |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.8 | wfX25PadPortDefaultCfgLenSubAddress | 0 | 0 | Size of the Subaddress portion of an X.121 address |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.9 | wfX25PadPortDefaultCfgX3escape | 0 | 0 | PAD recall using a character |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.10 | wfX25PadPortDefaultCfgX3echo | 0 | 0 | PAD echo |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.11 | wfX25PadPortDefaultCfgX3forward | 0 | 0 | Selection of the data forwarding characters |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.12 | wfX25PadPortDefaultCfgX3idle | 0 | 0 | Selection of the idle timer delay |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.13 | wfX25PadPortDefaultCfgX3device | 0 | 0 | Ancillary device control |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.14 | wfX25PadPortDefaultCfgX3signals | 0 | 0 | Control of PAD service signals |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.15 | wfX25PadPortDefaultCfgX3break | 0 | 0 | Selection of operation of the PAD on receipt of the break signal |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.16 | wfX25PadPortDefaultCfgX3discard | 0 | 0 | Discard output |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.17 | wfX25PadPortDefaultCfgX3CRpad | 0 | 0 | Padding after carriage return |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.18 | wfX25PadPortDefaultCfgX3folding | 0 | 0 | Line folding |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.19 | wfX25PadPortDefaultCfgX3speed | 0 | 0 | Binary speed |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.20 | wfX25PadPortDefaultCfgX3flow | 0 | 0 | Flow Control of the PAD by the start-stop mode DTE |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.21 | wfX25PadPortDefaultCfgX3LFinsert | 0 | 0 | Linefeed insertion after carriage return |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.22 | wfX25PadPortDefaultCfgX3LFpad | 0 | 0 | Linefeed padding |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.23 | wfX25PadPortDefaultCfgX3Edit | 0 | 0 | Editing |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.24 | wfX25PadPortDefaultCfgX3Cdelete | 0 | 0 | Character delete |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.25 | wfX25PadPortDefaultCfgX3Ldelete | 0 | 0 | Line delete |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.26 | wfX25PadPortDefaultCfgX3Ldisplay | 0 | 0 | Line display |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.27 | wfX25PadPortDefaultCfgX3Esignals | 0 | 0 | Editing PAD service signals |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.28 | wfX25PadPortDefaultCfgX3Mask | 0 | 0 | Echo mask |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.29 | wfX25PadPortDefaultCfgX3parity | 0 | 0 | Parity treatment |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.30 | wfX25PadPortDefaultCfgX3page | 0 | 0 | Page wait |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.31 | wfX25PadPortDefaultCfgLenUserData | 0 | 0 | Length of the user defined data |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.32 | wfX25PadPortDefaultCfgUserData | 0 | 0 | User defined data field represented in hexadecimal |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.33 | wfX25PadPortDefaultCfgLenRawFacilities | 0 | 0 | Length of the user defined facilities |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.34 | wfX25PadPortDefaultCfgRawFacilitiesData | 0 | 0 | User defined facilities filed represented in hexadecimal |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.35 | wfX25PadPortDefaultCfgReverseCharge | 0 | 0 | If subscribed to, authorizes the DCE to transmit to the DTE incoming calls which request the reverse charging facility. In absen… |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.36 | wfX25PadPortDefaultCfgThruClassNegotiation | 0 | 0 | This facility, if subscribed to, allows negotiation on a per call basis of the throughput classes. The throughput classes are co… |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.37 | wfX25PadPortDefaultCfgPacketSizeNegotiation | 0 | 0 | This facility, if subscribed to, will cause the DTE to request packet sizes for both directions of data transmission |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.38 | wfX25PadPortDefaultCfgWindowSizeNegotiation | 0 | 0 | This facility, if subscribed to, will cause the DTE to request window sizes for both directions of data transmission |
| 1.3.6.1.4.1.18.3.5.9.12.4.1.39 | wfX25PadPortDefaultCfgIntervalTimer | 0 | 0 | Time (where 1 equals 10 milliseconds) that the X.25 PAD will wait before forwarding packets with characters in them |