per Wellfleet PPP line configuration parameters
and counters
Parsed from file ppp.mib.txt
Company: None
Module: Wellfleet-PPP-MIB
per Wellfleet PPP line configuration parameters
and counters
Parsed from file Wellfleet-PPP-MIB.mib
Module: Wellfleet-PPP-MIB
Vendor: Wellfleet
Module: Wellfleet-PPP-MIB
[Automatically extracted from oidview.com]
wfPppLineEntry OBJECT-TYPE SYNTAX WfPppLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per Wellfleet PPP line configuration parameters and counters" INDEX { wfPppLineLineNumber, wfPppLineLLIndex } ::= { wfPppLineTable 1 }
wfPppLineEntry OBJECT-TYPE SYNTAX WfPppLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "per Wellfleet PPP line configuration parameters and counters" INDEX { wfPppLineLineNumber, wfPppLineLLIndex } ::= { wfPppLineTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.2.1.1.1 | wfPppLineDelete | 0 | 0 | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.2 | wfPppLineDisable | 0 | 0 | Enable/Disable parameter Open/Close events to the LCP FSM |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.3 | wfPppLineState | 0 | 0 | PPP state variable, Not Present, Init, Down, Up |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.4 | wfPppLineLineNumber | 0 | 0 | Instance identifier. This is the line number assigned to the driver PPP is running on top of |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.5 | wfPppLineLLIndex | 0 | 0 | Instance identifier. This is the lower layer index presented to PPP by the layer immediately below it on the protocol stack. If t… |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.6 | wfPppLineLcpCurrentState | 0 | 0 | the current state of the LCP Finite State Machine |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.7 | wfPppLineRestartTimer | 0 | 0 | value for Restart timer in seconds |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.8 | wfPppLineEchoRequestFreq | 0 | 0 | value for Echo-Request frequency - number of seconds between transmission of Echo-Request packets |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.9 | wfPppLineEchoReplyLoss | 0 | 0 | value for Echo-Reply acceptable loss - number of unacknowledged Echo-Reply packets counted before declaring the link down |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.10 | wfPppLineMaxConfReq | 0 | 0 | value for maximum Configure-Requests - number of Configure-Request packets sent without receiving a valid Configure-Ack, Configur… |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.11 | wfPppLineMaxTermReq | 0 | 0 | value for maximum Terminate-Requests - number of Terminate-Request packets sent without receiving a Terminate-Ack before assuming… |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.12 | wfPppLineMaxConfFail | 0 | 0 | value for maximum configuration failure count - number of Configure-Nak packets sent without sending a Configure-Ack before assum… |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.13 | wfPppLineMagicNumber | 0 | 0 | the Magic Number being used on this line |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.14 | wfPppLineMru | 0 | 0 | this is the MRU being used on the line (in both directions) |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.15 | wfPppLineLocalAuthProtocol | 0 | 0 | this is the authorization protocol we require our peer to use on our side of the link |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.16 | wfPppLineRemoteAuthProtocol | 0 | 0 | this is the authorization protocol our peer requires us to use on its side of the link |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.17 | wfPppLineLocalPapId | 0 | 0 | our PAP id - our peer sends this to us in an Authenticate-Request message |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.18 | wfPppLineLocalPapPassword | 0 | 0 | our PAP password - our peer sends this to us in an Authenticate-Request message |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.19 | wfPppLineRemotePapId | 0 | 0 | our peer's PAP id - we send this to our peer in an Authenticate-Request message |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.20 | wfPppLineRemotePapPassword | 0 | 0 | our peer's PAP password - we send this to our peer in an Authenticate-Request message |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.21 | wfPppLineLQProtocol | 0 | 0 | the Link Quality protocol we want to use |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.22 | wfPppLineDisableRemoteLQRTimer | 0 | 0 | enable/disable our peer's LQR timer - this allows for one side to maintain the timer while the other just responds to LQR packets |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.23 | wfPppLineCfgLQRRptPrd | 0 | 0 | this is the value in seconds between transmission of LQR packets (Reporting-Period) - it will be the same on both sides |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.24 | wfPppLineLQRRptPrd | 0 | 0 | this is the Reporting-Period, in seconds, agreed upon during negotiation - we allow the peer to negotiate down from our configure… |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.25 | wfPppLineCfgInboundQuality | 0 | 0 | the percentage of packets sent by our peer that we've successfully received (over the last 5 LQR Reporting-Periods) - 100 indicat… |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.26 | wfPppLineInboundQuality | 0 | 0 | the current inbound quality |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.27 | wfPppLineCfgOutboundQuality | 0 | 0 | the percentage of packets sent by us that our peer successfully received (over the last 5 LQR Reporting-Periods) - 100 indicates … |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.28 | wfPppLineOutboundQuality | 0 | 0 | the current inbound quality |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.29 | wfPppLineOutLQRs | 0 | 0 | the number of Link-Quality-Report packets we've transmitted |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.30 | wfPppLineInLQRs | 0 | 0 | the number of Link-Quality-Report packets we've received |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.31 | wfPppLineChapSecret | 0 | 0 | this CHAP secret MUST be the same on both sides of the link if CHAP is used as the Authentication protocol |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.32 | wfPppLinePapFallbackDisable | 0 | 0 | if an attempt to negotiate CHAP fails, enabling this allows a fallback to PAP |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.33 | wfPppLineChapLocalName | 0 | 0 | This attribute is used to assign a local CHAP Name which is used to inform our peer of our identity, during WHOAMI processing |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.34 | wfPppLineChapRemoteName | 0 | 0 | This attribute is used to store our peer's CHAP Name which is used to learn our peer's identity, during WHOAMI processing |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.35 | wfPppLineChapPeriodicTimer | 0 | 0 | Timer for periodic CHAP in seconds. A time of 0 disables Periodic CHAP. This timer value should long enough to allow CHAP to comp… |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.36 | wfPppLineBadPackets | 0 | 0 | These are packets not in correct PPP format |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.37 | wfPppLineLastBadPacket | 0 | 0 | This is the first 16 bytes of the last bad packet we received |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.38 | wfPppLineLevelPktsIn | 0 | 0 | This is the count of PPP link-level packets (such as Link Control Protocol or Compression Control Protocl) which have been receiv… |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.39 | wfPppLineAllowPapReject | 0 | 0 | There are some peers that don't want us asking to be a PAP authenticator, so accept the Reject and remove PAP from the LCP Config… |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.40 | wfPppLineActiveCct | 0 | 0 | This is the circuit number that this PPP line belongs to For the any switched lines, this will initially be -1 |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.41 | wfPppLineCfgAsyncMap | 0 | 0 | This is the initial seed value of Async-Control-Character-Map which will be used for LCP negotiations with the peer. |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.42 | wfPppLineActualAsyncMap | 0 | 0 | Async-Control-Character-Map used by the link to escape control characters in the data packet. This is the result of LCP negotiati… |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.43 | wfPppLineAuthTimer | 0 | 0 | wfPppLineAuthtimer |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.44 | wfPppLineConvergenceTimer | 0 | 0 | value for Convergence timer in seconds |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.45 | wfPppLineMagicNumDisable | 0 | 0 | Allows Magic Numbers to be disabled on this interface. |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.46 | wfPppLineMyLinkDiscr | 0 | 0 | value of Link Discriminator of this endpoint |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.47 | wfPppLinePeerLinkDiscr | 0 | 0 | value of Link Discriminator of peer's endpoint |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.48 | wfPppLineCfgMru | 0 | 0 | this is the Configured MRU being used on the line |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.49 | wfPppLineRfc1661Compliance | 0 | 0 | Enable/Disable parameter for RFC 1661 compliance |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.50 | wfPppLineLqmCurrentState | 0 | 0 | Indicates whether LQM is running on the line. |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.51 | wfPppLineDialInMLMCEnable | 0 | 0 | enable/disable Multilink Multiclass for inbound connections on this line (only meaningful for dialup connections) |
| 1.3.6.1.4.1.18.3.5.9.2.1.1.52 | wfPppLineLqrDebugFlag | 0 | 0 | value of the lqr debug flag, to be used to log debug events |