Attribute to clear the high-water marks. When the MIB
changes, Priority Queueing (if ENABLED) checks to see
if HighWaterPktsClear is different than the last time the MIB
was modified in any way. If it is different,
all the high water marks (see above) are set to zero.
Parsed from file ppp.mib.txt
Company: None
Module: Wellfleet-PPP-MIB
Attribute to clear the high-water marks. When the MIB
changes, Priority Queueing (if ENABLED) checks to see
if HighWaterPktsClear is different than the last time the MIB
was modified in any way. If it is different,
all the high water marks (see above) are set to zero.
Parsed from file Wellfleet-PPP-MIB.mib
Module: Wellfleet-PPP-MIB
Vendor: Wellfleet
Module: Wellfleet-PPP-MIB
[Automatically extracted from oidview.com]
wfPppMlStatsPQHighWaterPktsClear OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Attribute to clear the high-water marks. When the MIB changes, Priority Queueing (if ENABLED) checks to see if HighWaterPktsClear is different than the last time the MIB was modified in any way. If it is different, all the high water marks (see above) are set to zero." ::= { wfPppMlStatsEntry 35 }
wfPppMlStatsPQHighWaterPktsClear OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Attribute to clear the high-water marks. When the MIB changes, Priority Queueing (if ENABLED) checks to see if HighWaterPktsClear is different than the last time the MIB was modified in any way. If it is different, all the high water marks (see above) are set to zero." ::= { wfPppMlStatsEntry 35 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.9.2.4.1.1 | wfPppMlStatsDelete | 0 | 0 | Create/Delete parameter |
1.3.6.1.4.1.18.3.5.9.2.4.1.2 | wfPppMlStatsCircuitID | 0 | 0 | cct number for this instance |
1.3.6.1.4.1.18.3.5.9.2.4.1.3 | wfPppMlStatsHomeSlot | 0 | 0 | Slot on which this Multilink Control Subsystem exists |
1.3.6.1.4.1.18.3.5.9.2.4.1.4 | wfPppMlStatsLineCnt | 0 | 0 | Current count of lines in Multilink bundle |
1.3.6.1.4.1.18.3.5.9.2.4.1.5 | wfPppMlStatsBundleSpd | 0 | 0 | Current total bandwidth of Multilink bundle |
1.3.6.1.4.1.18.3.5.9.2.4.1.6 | wfPppMlStatsMrru | 0 | 0 | Current Maximum Receive Reconstructed Unit (MRRU) in use for Multilink bundle |
1.3.6.1.4.1.18.3.5.9.2.4.1.7 | wfPppMlStatsEndptDisc | 0 | 0 | Current Endpoint Discriminator in use for Multilink bundle |
1.3.6.1.4.1.18.3.5.9.2.4.1.8 | wfPppMlStatsTxOctets | 0 | 0 | Number of octets transmitted by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.9 | wfPppMlStatsTxPkts | 0 | 0 | Number of packets transmitted by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.10 | wfPppMlStatsAvgTxListLen | 0 | 0 | Average number of packets received in the transient list by the Multilink Transmit gate. |
1.3.6.1.4.1.18.3.5.9.2.4.1.11 | wfPppMlStatsRxOctets | 0 | 0 | Number of octets received without error |
1.3.6.1.4.1.18.3.5.9.2.4.1.12 | wfPppMlStatsRxPkts | 0 | 0 | Number of packets received by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.13 | wfPppMlStatsReasmFails | 0 | 0 | Number of packet reassembly failures |
1.3.6.1.4.1.18.3.5.9.2.4.1.14 | wfPppMlStatsSeqNumberLost | 0 | 0 | Number of Multilink packets considered to be lost on the wire |
1.3.6.1.4.1.18.3.5.9.2.4.1.15 | wfPppMlStatsSeqNumberArrivedLate | 0 | 0 | Number of Multilink packets which arrive containing an old Sequence Number. IE: packets with a more current Sequence Number have … |
1.3.6.1.4.1.18.3.5.9.2.4.1.16 | wfPppMlStatsReSeqBufferCnt | 0 | 0 | Number of Multilink packets currently stored in the ReSequencing buffer pool. |
1.3.6.1.4.1.18.3.5.9.2.4.1.17 | wfPppMlStatsReSeqBufferMax | 0 | 0 | The Maximum Number of Multilink packets stored in the ReSequencing buffer pool. |
1.3.6.1.4.1.18.3.5.9.2.4.1.18 | wfPppMlStatsExceededBufferMax | 0 | 0 | The number of times a buffer needed to be stored by the Multilink Receive logic when the count of buffers stored, wfPppMlStatsReS… |
1.3.6.1.4.1.18.3.5.9.2.4.1.19 | wfPppMlStatsLinkIdleEvents | 0 | 0 | The number of times the Multilink Receive logic detected a stored buffer received on a line which has been declared idle. |
1.3.6.1.4.1.18.3.5.9.2.4.1.20 | wfPppMlStatsCalcPercent | 0 | 0 | enable/disable collection of Rx percentage line usage |
1.3.6.1.4.1.18.3.5.9.2.4.1.21 | wfPppMlStatsDebug | 0 | 0 | DEBUG parameter - this is used to control debug code for the Multilink subsystem |
1.3.6.1.4.1.18.3.5.9.2.4.1.22 | wfPppMlStatsReassmBufferCnt | 0 | 0 | Number of Multilink packets currently stored in the Reassembling buffer pools. |
1.3.6.1.4.1.18.3.5.9.2.4.1.23 | wfPppMlStatsReassmBufferMax | 0 | 0 | The Maximum Number of Multilink packets stored in the Reassembling buffer pools. |
1.3.6.1.4.1.18.3.5.9.2.4.1.24 | wfPppMlStatsNumPktsFragmented | 0 | 0 | The Number of Multilink packets that were fragmented. |
1.3.6.1.4.1.18.3.5.9.2.4.1.25 | wfPppMlStatsPQHiXmits | 0 | 0 | High priority transmit count. |
1.3.6.1.4.1.18.3.5.9.2.4.1.26 | wfPppMlStatsPQNormalXmits | 0 | 0 | Normal priority transmit count. |
1.3.6.1.4.1.18.3.5.9.2.4.1.27 | wfPppMlStatsPQLoXmits | 0 | 0 | Low priority transmit count |
1.3.6.1.4.1.18.3.5.9.2.4.1.28 | wfPppMlStatsPQHiClippedPkts | 0 | 0 | High priority transmit clip Count |
1.3.6.1.4.1.18.3.5.9.2.4.1.29 | wfPppMlStatsPQNormalClippedPkts | 0 | 0 | Normal priority transmit clip Count |
1.3.6.1.4.1.18.3.5.9.2.4.1.30 | wfPppMlStatsPQLoClippedPkts | 0 | 0 | Low priority transmit clip Count |
1.3.6.1.4.1.18.3.5.9.2.4.1.31 | wfPppMlStatsPQIntrQHighWaterPkts | 0 | 0 | Interrupt-priority Queue high-water mark |
1.3.6.1.4.1.18.3.5.9.2.4.1.32 | wfPppMlStatsPQHiQHighWaterPkts | 0 | 0 | High-priority Queue high-water mark |
1.3.6.1.4.1.18.3.5.9.2.4.1.33 | wfPppMlStatsPQNormalQHighWaterPkts | 0 | 0 | Normal-priority Queue high-water mark |
1.3.6.1.4.1.18.3.5.9.2.4.1.34 | wfPppMlStatsPQLoQHighWaterPkts | 0 | 0 | Low-priority Queue high-water mark |
1.3.6.1.4.1.18.3.5.9.2.4.1.36 | wfPppMlStatsPQDroppedPkts | 0 | 0 | Packets which were filtered in Priority Queueing |
1.3.6.1.4.1.18.3.5.9.2.4.1.37 | wfPppMlStatsPQLargePkts | 0 | 0 | Large Packets which became an exception to latency rules |
1.3.6.1.4.1.18.3.5.9.2.4.1.38 | wfPppMlStatsPQHiTotalOctets | 0 | 0 | Running total of High Octets transmitted when using Bandwidth Allocation dequeueing algorithm |
1.3.6.1.4.1.18.3.5.9.2.4.1.39 | wfPppMlStatsPQNormalTotalOctets | 0 | 0 | Running total of Normal Octets transmitted when using Bandwidth Allocation dequeueing algorithm |
1.3.6.1.4.1.18.3.5.9.2.4.1.40 | wfPppMlStatsPQLoTotalOctets | 0 | 0 | Running total of Low Octets transmitted when using Bandwidth Allocation dequeueing algorithm |
1.3.6.1.4.1.18.3.5.9.2.4.1.41 | wfPppMlStatsPQPktsNotQueued | 0 | 0 | Packets that were not Queued or Dropped by Priority Queuing |
1.3.6.1.4.1.18.3.5.9.2.4.1.42 | wfPppMlStatsClass0TxOctets | 0 | 0 | Number of octets transmitted by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.43 | wfPppMlStatsClass0TxPkts | 0 | 0 | Number of packets transmitted by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.44 | wfPppMlStatsClass1TxOctets | 0 | 0 | Number of octets transmitted by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.45 | wfPppMlStatsClass1TxPkts | 0 | 0 | Number of packets transmitted by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.46 | wfPppMlStatsClass2TxOctets | 0 | 0 | Number of octets transmitted by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.47 | wfPppMlStatsClass2TxPkts | 0 | 0 | Number of packets transmitted by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.48 | wfPppMlStatsClass3TxOctets | 0 | 0 | Number of octets transmitted by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.49 | wfPppMlStatsClass3TxPkts | 0 | 0 | Number of packets transmitted by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.50 | wfPppMlStatsClass4TxOctets | 0 | 0 | Number of octets transmitted by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.51 | wfPppMlStatsClass4TxPkts | 0 | 0 | Number of packets transmitted by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.52 | wfPppMlStatsClass5TxOctets | 0 | 0 | Number of octets transmitted by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.53 | wfPppMlStatsClass5TxPkts | 0 | 0 | Number of packets transmitted by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.54 | wfPppMlStatsClass0RxOctets | 0 | 0 | Number of octets received without error |
1.3.6.1.4.1.18.3.5.9.2.4.1.55 | wfPppMlStatsClass0RxPkts | 0 | 0 | Number of packets received by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.56 | wfPppMlStatsClass1RxOctets | 0 | 0 | Number of octets received without error |
1.3.6.1.4.1.18.3.5.9.2.4.1.57 | wfPppMlStatsClass1RxPkts | 0 | 0 | Number of packets received by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.58 | wfPppMlStatsClass2RxOctets | 0 | 0 | Number of octets received without error |
1.3.6.1.4.1.18.3.5.9.2.4.1.59 | wfPppMlStatsClass2RxPkts | 0 | 0 | Number of packets received by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.60 | wfPppMlStatsClass3RxOctets | 0 | 0 | Number of octets received without error |
1.3.6.1.4.1.18.3.5.9.2.4.1.61 | wfPppMlStatsClass3RxPkts | 0 | 0 | Number of packets received by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.62 | wfPppMlStatsClass4RxOctets | 0 | 0 | Number of octets received without error |
1.3.6.1.4.1.18.3.5.9.2.4.1.63 | wfPppMlStatsClass4RxPkts | 0 | 0 | Number of packets received by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.64 | wfPppMlStatsClass5RxOctets | 0 | 0 | Number of octets received without error |
1.3.6.1.4.1.18.3.5.9.2.4.1.65 | wfPppMlStatsClass5RxPkts | 0 | 0 | Number of packets received by Multilink |
1.3.6.1.4.1.18.3.5.9.2.4.1.66 | wfPppMlStatsMCClippedOctets | 0 | 0 | Number of octets clipped by PPP MultiClass due to driver-level congestion |
1.3.6.1.4.1.18.3.5.9.2.4.1.67 | wfPppMlStatsMCClippedPkts | 0 | 0 | Number of packets clipped by PPP MultiClass due to driver-level congestion |