An entry in the X.25 VC table.
Parsed from file WFMIB.asn.txt
Company: None
Module: Wellfleet-Series7-MIB
An entry in the X.25 VC table.
Parsed from file Wellfleet-X25-MIB.mib
Module: Wellfleet-X25-MIB
Vendor: Wellfleet
Module: Wellfleet-X25-MIB
[Automatically extracted from oidview.com]
wfX25VcEntry OBJECT-TYPE SYNTAX WfX25VcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " An entry in the X.25 VC table. " INDEX { wfX25VcSlotNum, wfX25VcConnector, wfX25VcLineNumber, wfX25VcLLIndex, wfX25VcCct, wfX25VcNumber } ::= { wfX25Vc 1 }
wfX25VcEntry OBJECT-TYPE SYNTAX WfX25VcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the X.25 VC table." INDEX { wfX25VcSlotNum, wfX25VcConnector, wfX25VcLineNumber, wfX25VcLLIndex, wfX25VcCct, wfX25VcNumber } ::= { wfX25VcTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.4.4.1.1 | wfX25VcSlotNum | 0 | 0 | Instance ID and Slot number this VC is on. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.2 | wfX25VcConnector | 0 | 0 | Instance ID and Connector number this VC is using |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.3 | wfX25VcLineNumber | 0 | 0 | Instance identifier member. This is the line number assigned to the driver X25 is running on top of and this VC is running on. N… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.4 | wfX25VcLLIndex | 0 | 0 | Instance identifier member. This is the lower layer index presented to X25 by the layer immediately below it on the protocol stac… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.5 | wfX25VcCct | 0 | 0 | Instance ID and CCT supporting these VCs. User determines this CCT via log. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.6 | wfX25VcNumber | 0 | 0 | Instance ID and VC number for this VC. This number corresponds to the LCN. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.7 | wfX25VcDataTxs | 0 | 0 | Number of Data Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.8 | wfX25VcInterruptTxs | 0 | 0 | Number of Interrupt Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.9 | wfX25VcResetTxs | 0 | 0 | Number of Reset Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.10 | wfX25VcRrTxs | 0 | 0 | Number of Receiver Ready Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.11 | wfX25VcRnrTxs | 0 | 0 | Number of Receiver Not Ready Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.12 | wfX25VcRejectTxs | 0 | 0 | Number of Reject Packets sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.13 | wfX25VcSegmentTxs | 0 | 0 | Number of Charge Units sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.14 | wfX25VcBytesTxs | 0 | 0 | Number of Data Bytes sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.15 | wfX25VcIntBytesTxs | 0 | 0 | Number of Interrupt Data Bytes sent. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.16 | wfX25VcDataRxs | 0 | 0 | Number of Data Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.17 | wfX25VcInterruptRxs | 0 | 0 | Number of Interrupt Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.18 | wfX25VcResetRxs | 0 | 0 | Number of Reset Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.19 | wfX25VcRrRxs | 0 | 0 | Number of Receiver Ready Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.20 | wfX25VcRnrRxs | 0 | 0 | Number of Receiver Not Ready Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.21 | wfX25VcRejectRxs | 0 | 0 | Number of Reject Packets received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.22 | wfX25VcSegmentRxs | 0 | 0 | Number of Charge Units received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.23 | wfX25VcBytesRxs | 0 | 0 | Number of Data Bytes received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.24 | wfX25VcIntBytesRxs | 0 | 0 | Number of Interrupt Data Bytes received. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.25 | wfX25VcApPktsDropped | 0 | 0 | Number of Application/redirector Packets Droped |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.26 | wfX25VcRemoteX121Addr | 0 | 0 | Remote DTE Address for this connection |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.27 | wfX25VcBurstQClippedPkts | 0 | 0 | Number of packets dropped for this VC due to lack of buffers in the Burst Queue. Packets are only dropped when the value of the s… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.28 | wfX25VcBurstQPktCnt | 0 | 0 | Number of packets stored for this VC in the Burst Queue between successive attempts to forward to the PLP layer. This statistic i… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.29 | wfX25VcBurstQHighWaterPkts | 0 | 0 | High Water Packet Mark for the Burst Queue of this VC. |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.30 | wfX25VcPktsLargerThanBurstThrCnt | 0 | 0 | Total Number of Packets serviced on this VC which are larger than the computed burst throughput per VC. The burst throughput per … |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.31 | wfX25VcPktDrops | 0 | 0 | Total Number of Packets Dropped on this VC. These drops are caused by insufficient resources being available to forward the packe… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.32 | wfX25VcPlpPktDrops | 0 | 0 | Total Number of Packets Dropped by PLP on this VC. These drops are due to either the line being disabled or the lack of buffering… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.33 | wfX25VcMbsOutstanding | 0 | 0 | Number of packets sent to the PLP layer from the upper layer that have not yet been added to the local assembly/deassembly queue … |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.34 | wfX25VcMbsOutstandingPostTx | 0 | 0 | Number of buffers sent to the PLP layer that have not yet been added to the local asembly/deassembly queue. This value is set af… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.35 | wfX25VcMaxTx | 0 | 0 | Maximum Number of buffers that can be sent from the upper layer to the PLP layer at any one time without overflowing the local as… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.36 | wfX25VcMbsQueueCnt | 0 | 0 | Number of buffers sent to the PLP layer that are currently on the local assembly/deassembly queue at the PLP layer. This value is… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.37 | wfX25VcMbsQueueCntPostTx | 0 | 0 | Number of buffers sent to the PLP layer that have not yet been added to the local assembly/deassembly queue. This value is set a… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.38 | wfX25VcTxQueueCnt | 0 | 0 | Number of buffers sent to the PLP layer that are currently on the transmit queue at the PLP layer. This value is set after the PL… |
| 1.3.6.1.4.1.18.3.5.9.4.4.1.39 | wfX25VcTxQueueCntPostTx | 0 | 0 | Number of buffers sent to the PLP layer that are currently on thequeue to transmit at the PLP layer. This value is set after the… |