The ATM DXI Table - An entry in this table is either resident in
the Wellfleet MIB or in the Digital Link MIB via the SNMP Proxy.
The Component attribute determines local or remote residency.
The ATM Data Exchange Interface (DXI) object reflects
information about an ATM DXI interface between an ATM DSU
and a Router/Host. In particular, it contains both
configuration and performance information specific to the DXI
(ATM) interface.
Each DXI instance typically corresponds to several (ATM)
DXIADDRs. The DXI object optionally keeps some information
on a per-DXIADDR basis.
Each instance of the DXI object typically has only one
corresponding ATM -AAL object, but the MIB has been
structured so that a DXI may have more than one.
It should be noted that in the DXI MIB, the receive (transmit)
direction refers to data received from (transmitted to)
the ATM interface.
With a 23-bit DXIADDR, the range of valid DXIADDR index values is
1 thru 2**23 inclusive. Note that the 23-bit binary DXIADDR field
(with values 0 thru 2**23-1) from the Frame Relay header must be
incremented by one to yield the DXIADDR index for accessing the
tables in the MIB. The DXIADDR consisting of all zeros (with
corresponding MIB index value of 1) is reserved for the DXI
Local Management Interface (LMI) with the DSU.
** For DL200 and DL3200 DSUs, there is only one ATM DXI per DSU
** and only one AAL object (specifically VBR) per ATM DXI.
** For these products, the mapping between the DXI (Frame Relay)
** DXIADDR and the ATM VPI/VCI is fixed. The LMI DXIADDR has no
** corresponding VPI/VCI. Otherwise, the eight most significant
** bits of the DXIADDR map into the the VPI (the eight most
** significant bits of the VPI/VCI), the fifteen least
** significant bits of the DXIADDR map into the fifteen least
** significant bits of the VCI, and the most significant bit of
** the VCI is set to zero.
Parsed from file atm.mib.txt
Company: None
Module: Wellfleet-ATM-MIB
The ATM DXI Table - An entry in this table is either resident in
the Wellfleet MIB or in the Digital Link MIB via the SNMP Proxy.
The Component attribute determines local or remote residency.
The ATM Data Exchange Interface (DXI) object reflects
information about an ATM DXI interface between an ATM DSU
and a Router/Host. In particular, it contains both
configuration and performance information specific to the DXI
(ATM) interface.
Each DXI instance typically corresponds to several (ATM)
DXIADDRs. The DXI object optionally keeps some information
on a per-DXIADDR basis.
Each instance of the DXI object typically has only one
corresponding ATM -AAL object, but the MIB has been
structured so that a DXI may have more than one.
It should be noted that in the DXI MIB, the receive (transmit)
direction refers to data received from (transmitted to)
the ATM interface.
With a 23-bit DXIADDR, the range of valid DXIADDR index values is
1 thru 2**23 inclusive. Note that the 23-bit binary DXIADDR field
(with values 0 thru 2**23-1) from the Frame Relay header must be
incremented by one to yield the DXIADDR index for accessing the
tables in the MIB. The DXIADDR consisting of all zeros (with
corresponding MIB index value of 1) is reserved for the DXI
Local Management Interface (LMI) with the DSU.
DxiAddr ::= INTEGER (1..8388608)
** For DL200 and DL3200 DSUs, there is only one ATM DXI per DSU
** and only one AAL object (specifically VBR) per ATM DXI.
** For these products, the mapping between the DXI (Frame Relay)
** DXIADDR and the ATM VPI/VCI is fixed. The LMI DXIADDR has no
** corresponding VPI/VCI. Otherwise, the eight most significant
** bits of the DXIADDR map into the the VPI (the eight most
** significant bits of the VPI/VCI), the fifteen least
** significant bits of the DXIADDR map into the fifteen least
** significant bits of the VCI, and the most significant bit of
** the VCI is set to zero.
Parsed from file Wellfleet-ATM-MIB.mib
Module: Wellfleet-ATM-MIB
Vendor: Wellfleet
Module: Wellfleet-ATM-MIB
[Automatically extracted from oidview.com]
wfAtmDxiTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmDxiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM DXI Table - An entry in this table is either resident in the Wellfleet MIB or in the Digital Link MIB via the SNMP Proxy. The Component attribute determines local or remote residency. The ATM Data Exchange Interface (DXI) object reflects information about an ATM DXI interface between an ATM DSU and a Router/Host. In particular, it contains both configuration and performance information specific to the DXI (ATM) interface. Each DXI instance typically corresponds to several (ATM) DXIADDRs. The DXI object optionally keeps some information on a per-DXIADDR basis. Each instance of the DXI object typically has only one corresponding ATM -AAL object, but the MIB has been structured so that a DXI may have more than one. It should be noted that in the DXI MIB, the receive (transmit) direction refers to data received from (transmitted to) the ATM interface. With a 23-bit DXIADDR, the range of valid DXIADDR index values is 1 thru 2**23 inclusive. Note that the 23-bit binary DXIADDR field (with values 0 thru 2**23-1) from the Frame Relay header must be incremented by one to yield the DXIADDR index for accessing the tables in the MIB. The DXIADDR consisting of all zeros (with corresponding MIB index value of 1) is reserved for the DXI Local Management Interface (LMI) with the DSU. ** For DL200 and DL3200 DSUs, there is only one ATM DXI per DSU ** and only one AAL object (specifically VBR) per ATM DXI. ** For these products, the mapping between the DXI (Frame Relay) ** DXIADDR and the ATM VPI/VCI is fixed. The LMI DXIADDR has no ** corresponding VPI/VCI. Otherwise, the eight most significant ** bits of the DXIADDR map into the the VPI (the eight most ** significant bits of the VPI/VCI), the fifteen least ** significant bits of the DXIADDR map into the fifteen least ** significant bits of the VCI, and the most significant bit of ** the VCI is set to zero." ::= { wfAtmGroup 15 }
wfAtmDxiTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmDxiEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM DXI Table - An entry in this table is either resident in the Wellfleet MIB or in the Digital Link MIB via the SNMP Proxy. The Component attribute determines local or remote residency. The ATM Data Exchange Interface (DXI) object reflects information about an ATM DXI interface between an ATM DSU and a Router/Host. In particular, it contains both configuration and performance information specific to the DXI (ATM) interface. Each DXI instance typically corresponds to several (ATM) DXIADDRs. The DXI object optionally keeps some information on a per-DXIADDR basis. Each instance of the DXI object typically has only one corresponding ATM -AAL object, but the MIB has been structured so that a DXI may have more than one. It should be noted that in the DXI MIB, the receive (transmit) direction refers to data received from (transmitted to) the ATM interface. With a 23-bit DXIADDR, the range of valid DXIADDR index values is 1 thru 2**23 inclusive. Note that the 23-bit binary DXIADDR field (with values 0 thru 2**23-1) from the Frame Relay header must be incremented by one to yield the DXIADDR index for accessing the tables in the MIB. The DXIADDR consisting of all zeros (with corresponding MIB index value of 1) is reserved for the DXI Local Management Interface (LMI) with the DSU. DxiAddr ::= INTEGER (1..8388608) ** For DL200 and DL3200 DSUs, there is only one ATM DXI per DSU ** and only one AAL object (specifically VBR) per ATM DXI. ** For these products, the mapping between the DXI (Frame Relay) ** DXIADDR and the ATM VPI/VCI is fixed. The LMI DXIADDR has no ** corresponding VPI/VCI. Otherwise, the eight most significant ** bits of the DXIADDR map into the the VPI (the eight most ** significant bits of the VPI/VCI), the fifteen least ** significant bits of the DXIADDR map into the fifteen least ** significant bits of the VCI, and the most significant bit of ** the VCI is set to zero." ::= { wfAtmGroup 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.5.15.1 | wfAtmDxiEntry | 15 | 15 | per linenumber/llindex ATM DXI objects - wfAtmDxiLineNumber and wfAtmDxiLLIndex corresponds to Wellfleet linenumber/llindex numb… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.5.1 | wfAtm | 4 | 8 | None |
| 1.3.6.1.4.1.18.3.5.9.5.2 | wfAtmInterfaceTable | 1 | 20 | ATM Interface Table - Router Resident The statistical and configuration parameters for an ATM Interface. There is one MIB instanc… |
| 1.3.6.1.4.1.18.3.5.9.5.3 | wfAtmLmiTable | 1 | 10 | ATM Local Management Interface Table - Router Resident The statistical and configuration parameters for an ATM DXI Local Manageme… |
| 1.3.6.1.4.1.18.3.5.9.5.4 | wfAtmPlcpTable | 1 | 21 | The ATM PLCP Table - CSU/DSU Resident The PLCP object reflects information about either DS1 or DS3 PLCP framing status and perfor… |
| 1.3.6.1.4.1.18.3.5.9.5.5 | wfAtmUniTable | 1 | 7 | The ATM UNI Table - CSU/DSU Resident The ATM User Network Interface (UNI) object reflects information about a particular ATM UNI.… |
| 1.3.6.1.4.1.18.3.5.9.5.6 | wfAtmUniAtmTable | 1 | 11 | The ATM UNIATM Table CSU/DSU Resident This list contains ATM Layer parameters, one entry per ATM UNI port. The counts maintained… |
| 1.3.6.1.4.1.18.3.5.9.5.8 | wfAtmVbrTable | 1 | 7 | The ATM VBR Table - CSU/DSU Resident The ATM Variable Bit Rate (VBR) object is one of several types of ATM Adaptation Layer (AAL)… |
| 1.3.6.1.4.1.18.3.5.9.5.9 | wfAtmVbrSarTable | 1 | 18 | The ATM VBR SAR Table CSU/DSU Resident This table contains ATM VBR-AAL, SAR Layer parameters, the entry per ATM VBR-AAL object. T… |
| 1.3.6.1.4.1.18.3.5.9.5.11 | wfAtmVbrCsTable | 1 | 9 | The ATM VBR CS Table - Router Resident This table contains ATM VBR-AAL, CS Layer parameters, one entry per ATM VBR-AAL object. T… |
| 1.3.6.1.4.1.18.3.5.9.5.12 | wfAtmVbrCsVciTable | 1 | 12 | The ATM VBR CS_VCI Table - Router Resident This table contains ATM VBR-AAL, CS Layer parameters, one entry per ATM VPI/VCI for wh… |
| 1.3.6.1.4.1.18.3.5.9.5.13 | wfAtmMpeTable | 1 | 8 | The ATM MPE Table - Router Resident This table contains ATM DXI MPE Layer parameters, one entry per ATM Circuit.The counts mainta… |
| 1.3.6.1.4.1.18.3.5.9.5.14 | wfAtmPvcTable | 1 | 19 | The ATM PVC Table - Router Resident This table contains Virtual Circuit configuration and stats parameters, one entry per ATM VPI… |
| 1.3.6.1.4.1.18.3.5.9.5.16 | wfAtmDxiDxiAddrTable | 1 | 10 | The ATM DXI DXIADDR Table - Router and CSU/DSU Resident This table contains ATM DXI parameters, one entry per DXI DXIADDR for whi… |
| 1.3.6.1.4.1.18.3.5.9.5.20 | wfAtmLeGroup | 10 | 153 | None |