Indicates the state for this interface.
The state indicates Not Present when the interface has been
configured but has not been initialized. Init state indicates
that the interface is in the process of being initialized by the
system. Up state indicates that the interface is operating
normally. Down state indicates that the ATM DXI interface is
physically or logically disabled.
Parsed from file atm.mib.txt
Company: None
Module: Wellfleet-ATM-MIB
Indicates the state for this interface.
The state indicates Not Present when the interface has been
configured but has not been initialized. Init state indicates
that the interface is in the process of being initialized by the
system. Up state indicates that the interface is operating
normally. Down state indicates that the ATM DXI interface is
physically or logically disabled.
Parsed from file Wellfleet-ATM-MIB.mib
Module: Wellfleet-ATM-MIB
Vendor: Wellfleet
Module: Wellfleet-ATM-MIB
[Automatically extracted from oidview.com]
wfAtmInterfaceState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state for this interface. The state indicates Not Present when the interface has been configured but has not been initialized. Init state indicates that the interface is in the process of being initialized by the system. Up state indicates that the interface is operating normally. Down state indicates that the ATM DXI interface is physically or logically disabled." DEFVAL { notpresent } ::= { wfAtmInterfaceEntry 3 }
wfAtmInterfaceState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state for this interface. The state indicates Not Present when the interface has been configured but has not been initialized. Init state indicates that the interface is in the process of being initialized by the system. Up state indicates that the interface is operating normally. Down state indicates that the ATM DXI interface is physically or logically disabled." DEFVAL { notpresent } ::= { wfAtmInterfaceEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.5.2.1.1 | wfAtmInterfaceDelete | 0 | 0 | Indication to create or delete an ATM DXI interface. This will remove ATMNET access over this interface The ATM Interface entry … |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.2 | wfAtmInterfaceDisable | 0 | 0 | Indicates when an ATM DXI interface is to be enabled or disabled. Disabling will disable ATM Access over this interface. The ATM… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.4 | wfAtmInterfaceCircuit | 0 | 0 | The Wellfleet circuit number of this entry |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.5 | wfAtmInterfaceMaxSupportedVCs | 0 | 0 | Maximum number of VCs allowed on this interface. Initially set by configuration system for PVCs only |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.6 | wfAtmInterfaceVCsInUse | 0 | 0 | The number of VCs that are currently configured on this interface |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.7 | wfAtmInterfaceDescr | 0 | 0 | A textual string describing this ATM interface. |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.8 | wfAtmInterfaceType | 0 | 0 | The transmission type used at the ATM interface. |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.9 | wfAtmInterfaceLastChange | 0 | 0 | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.10 | wfAtmInterfacePlcp | 0 | 0 | Identifies the OID of the PLCP object in the MIB If no additional transmission and/or media specific information is available, th… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.11 | wfAtmMpeNull | 0 | 0 | Used to select Null, Multi-Protocol Encapsulation (RFC 1294) or Multi-Protocol Encapsulation (RFC 1483) layer for this Interface.… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.12 | wfAtmCsNull | 0 | 0 | Used to configure the type of CS_PDU encapsulation supported on the ATM DXI interface based on the ATM Forum's ATM DXI specifica… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.13 | wfAtmInterfaceMulticast | 0 | 0 | This indicates whether the ATM service provider offers multicast service |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.14 | wfAtmDrops | 0 | 0 | The cumulative count of packet drops on this ATM Interface. |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.15 | wfAtmInterfaceLmiDisable | 0 | 0 | Indicates when an LMI entry is to be enabled or disabled. Disabling will temporarily disable the ability to report CSU/DSU traps … |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.16 | wfAtmInterfaceLineNumber | 0 | 0 | Instance identifier. This value corresponds to the line number of the Wellfleet router. |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.17 | wfAtmInterfaceLLIndex | 0 | 0 | Instance identifier. This value corresponds to the port's llindex number. The Lower layer index uniquely identifies the lower lay… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.18 | wfAtmInterfaceDxiMode | 0 | 0 | ATM DXI Mode. This attribute specifies the ATM DXI Mode for this interface based on the ATM Forum's ATM DXI specification. Curre… |
| 1.3.6.1.4.1.18.3.5.9.5.2.1.19 | wfAtmUnknownVCPkts | 0 | 0 | The count of packets received with an unknown VC |