C14 LE Client Identifier. Each LE Client requires a
LE Client Identifier (LECID) assigned by the LE
Server during the Join phase. The LECID is placed
in control requests by the LE Client and MAY be
used for echo suppression on multicast data frames
sent by that LE Client. This value MUST NOT
change without terminating the LE Client and
returning to the Initial state. A valid LECID
MUST be in the range X'0001' through X'FEFF'.
The value of this object is only meaningful for a LEC
that is connected to a LES. For a LEC which does not
belong to an emulated LAN, the value of this object
is defined to be 0.'
Parsed from file atm_le.mib.txt
Company: None
Module: Wellfleet-ATM-LE-MIB
C14 LE Client Identifier. Each LE Client requires a
LE Client Identifier (LECID) assigned by the LE
Server during the Join phase. The LECID is placed
in control requests by the LE Client and MAY be
used for echo suppression on multicast data frames
sent by that LE Client. This value MUST NOT
change without terminating the LE Client and
returning to the Initial state. A valid LECID
MUST be in the range X'0001' through X'FEFF'.
The value of this object is only meaningful for a LEC
that is connected to a LES. For a LEC which does not
belong to an emulated LAN, the value of this object
is defined to be 0.'
Parsed from file Wellfleet-ATM-LE-MIB.mib
Module: Wellfleet-ATM-LE-MIB
Vendor: Wellfleet
Module: Wellfleet-ATM-LE-MIB
[Automatically extracted from oidview.com]
wflecID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "C14 LE Client Identifier. Each LE Client requires a LE Client Identifier (LECID) assigned by the LE Server during the Join phase. The LECID is placed in control requests by the LE Client and MAY be used for echo suppression on multicast data frames sent by that LE Client. This value MUST NOT change without terminating the LE Client and returning to the Initial state. A valid LECID MUST be in the range X'0001' through X'FEFF'. The value of this object is only meaningful for a LEC that is connected to a LES. For a LEC which does not belong to an emulated LAN, the value of this object is defined to be 0.'" ::= { wfAtmLecStatusEntry 3 }
wflecID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "C14 LE Client Identifier. Each LE Client requires a LE Client Identifier (LECID) assigned by the LE Server during the Join phase. The LECID is placed in control requests by the LE Client and MAY be used for echo suppression on multicast data frames sent by that LE Client. This value MUST NOT change without terminating the LE Client and returning to the Initial state. A valid LECID MUST be in the range X'0001' through X'FEFF'. The value of this object is only meaningful for a LEC that is connected to a LES. For a LEC which does not belong to an emulated LAN, the value of this object is defined to be 0.'" ::= { wfAtmLecStatusEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.1 | wflecStatusCct | 0 | 0 | This corresponds to the Wellfleet circuit number |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.2 | wflecPrimaryAtmAddress | 0 | 0 | C1 - LE Client's ATM Address. |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.4 | wflecInterfaceState | 0 | 0 | Indicates the state for the LE Client |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.5 | wflecLastFailureRespCode | 0 | 0 | Failure response code. Status code from the last failed Configure response or Join response. Failed responses are those for which… |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.6 | wflecLastFailureState | 0 | 0 | Last failure state The state this client was in when it updated the 'lecLastFailureRespCode'. If 'lecLastFailureRespCode' is 'none… |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.7 | wflecProtocol | 0 | 0 | The LAN Emulation protocol which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.8 | wflecVersion | 0 | 0 | The LAN Emulation protocol version which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.9 | wflecTopologyChange | 0 | 0 | C19 Topology Change. Boolean indication that the LE Client is using the Forward Delay Time C18, instead of the Ageing Time C17, … |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.10 | wflecConfigServerAtmAddress | 0 | 0 | The ATM address of the LECS for this Client |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.11 | wflecConfigSource | 0 | 0 | Indicates whether this LAN Emulation Client used the LAN Emulation Configuration Server, and, if so, what method it used to estab… |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.12 | wflecActualLanType | 0 | 0 | C2 - LEC LAN Type The data frame format that this LAN Emulation Client is using right now. This may come from lecConfigLanType, th… |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.13 | wflecActualMaxDataFrameSize | 0 | 0 | C3 Maximum Data Frame Size. The maximum data frame size that this LAN Emulation client is using right now. This may come from lec… |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.14 | wflecActualLanName | 0 | 0 | C5 ELAN Name. The identity of the emulated LAN which this client last joined, or wishes to join. This may come from lecConfigLanT… |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.15 | wflecActualLesAtmAddress | 0 | 0 | C9 LE Server ATM Address. The LAN Emulation Server address currently in use or most recently attempted. If no LAN Emulation Server… |
| 1.3.6.1.4.1.18.3.5.9.5.20.2.1.16 | wflecProxyClient | 0 | 0 | C4 Proxy When a client joins an ATM emulated LAN, it indicates whether it wants to act as a proxy. Proxy clients are allowed to re… |