This number determines the timer interval (number
of seconds) unit for the Billing process to perform
its various timer driven tasks. i.e. updating billing
usage data, writing billing usage data to file system
and file system management activities.
Parsed from file WFMIB.asn.txt
Company: None
Module: Wellfleet-Series7-MIB
This number determines the timer interval (number
of seconds) unit for the Billing process to perform
its various timer driven tasks. i.e. updating billing
usage data, writing billing usage data to file system
and file system management activities.
Parsed from file Wellfleet-FRSW-MIB.mib
Module: Wellfleet-FRSW-MIB
Vendor: Wellfleet
Module: Wellfleet-FRSW-MIB
[Automatically extracted from oidview.com]
wfFrSwUsageTimerInterval OBJECT-TYPE SYNTAX INTEGER(1..60) ACCESS read-write STATUS mandatory DESCRIPTION " This number determines the timer interval (number of seconds) unit for the Billing process to perform its various timer driven tasks. i.e. updating billing usage data, writing billing usage data to file system and file system management activities. " DEFVAL { 1 } ::= { wfFrSwUsage 6 }
wfFrSwUsageTimerInterval OBJECT-TYPE SYNTAX INTEGER(1..60) ACCESS read-write STATUS mandatory DESCRIPTION "This number determines the timer interval (number of seconds) unit for the Billing process to perform its various timer driven tasks. i.e. updating billing usage data, writing billing usage data to file system and file system management activities." DEFVAL { 20 } ::= { wfFrSwUsage 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.6.5.6.0 | wfFrSwUsageTimerInterval | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.6.5.1 | wfFrSwUsageEnable | 1 | 1 | Enable/Disable FRSW billing. |
| 1.3.6.1.4.1.18.3.5.9.6.5.2 | wfFrSwUsageVolume | 1 | 1 | Indicates the file system volume number to which the billing usage data files will be written. The volume number corresponds to … |
| 1.3.6.1.4.1.18.3.5.9.6.5.3 | wfFrSwUsageVolumeBackup | 1 | 1 | Indicates the backup volume if wfFrSwUsageVolume becomes inoperative. Note: This feature is not implemented in this release. |
| 1.3.6.1.4.1.18.3.5.9.6.5.4 | wfFrSwUsageDirectory | 1 | 1 | The name of the directory where the billing usage data files are stored. |
| 1.3.6.1.4.1.18.3.5.9.6.5.5 | wfFrSwUsageFilePrefix | 1 | 1 | The base name of billing usage data files. |
| 1.3.6.1.4.1.18.3.5.9.6.5.7 | wfFrSwUsageUpdateInterval | 1 | 1 | This number specifies the interval (number of minutes) for the Billing process to collect and update billing usage data in the wf… |
| 1.3.6.1.4.1.18.3.5.9.6.5.8 | wfFrSwUsageStoreInterval | 1 | 1 | This number specifies the interval (number of minutes) for the Billing process to write billing usage data on to the file system … |
| 1.3.6.1.4.1.18.3.5.9.6.5.9 | wfFrSwUsageFlushInterval | 1 | 1 | This number specifies the interval (number of minutes) for the Billing process to write billing usage data on to the file system … |
| 1.3.6.1.4.1.18.3.5.9.6.5.10 | wfFrSwUsageCleanupInterval | 1 | 1 | This is the interval (number of minutes) for the Billing process to check and delete old billing usage data files. Note: When con… |
| 1.3.6.1.4.1.18.3.5.9.6.5.11 | wfFrSwUsageLocalTimeZone | 1 | 1 | Indicates local time zone of the switch |
| 1.3.6.1.4.1.18.3.5.9.6.5.12 | wfFrSwUsageUpdateTimeStamp | 1 | 1 | Time stamp of last wfFrSwUsageUpdateInterval timer expiration or the starting time of the current wfFrSwUsageUpdateInterval. Thi… |
| 1.3.6.1.4.1.18.3.5.9.6.5.13 | wfFrSwUsageStoreTimeStamp | 1 | 1 | Time stamp of last wfFrSwUsageStoreInterval timer expiration or the starting time of the current wfFrSwUsageStoreInterval. This … |
| 1.3.6.1.4.1.18.3.5.9.6.5.14 | wfFrSwUsageFlushTimeStamp | 1 | 1 | wfFrSwUsageFlushtimeStamp |
| 1.3.6.1.4.1.18.3.5.9.6.5.15 | wfFrSwUsageCleanupTimeStamp | 1 | 1 | Time stamp of last wfFrSwUsageCleanupInterval timer expiration or the starting time of the current wfFrSwUsageCleanupInterval. T… |
| 1.3.6.1.4.1.18.3.5.9.6.5.16 | wfFrSwUsageUpdateData | 1 | 1 | Setting this attribute to a non-zero value will cause an immediate updating of the billing usage data. Once activated, this attri… |
| 1.3.6.1.4.1.18.3.5.9.6.5.17 | wfFrSwUsageStoreData | 1 | 1 | Setting this attribute to a non-zero value will cause an immediate updating and writing of the billing usage data. Once activated… |
| 1.3.6.1.4.1.18.3.5.9.6.5.18 | wfFrSwUsageFlushData | 1 | 1 | Setting this attribute to a non-zero value will cause an immediate updating and writing of the billing usage data and followed by… |
| 1.3.6.1.4.1.18.3.5.9.6.5.19 | wfFrSwUsageFileCleanup | 1 | 1 | Setting this attribute to a non-zero value will cause an immediate checking and deleting old billing usage data files. Once activ… |
| 1.3.6.1.4.1.18.3.5.9.6.5.20 | wfFrSwUsageState | 1 | 1 | current state FRSW billing. |
| 1.3.6.1.4.1.18.3.5.9.6.5.21 | wfFrSwUsageCurVolume | 1 | 1 | current file system volume number used. This number is the same as wfFrSwUsageVolume except when the user sets wfFrSwUsageVolume … |
| 1.3.6.1.4.1.18.3.5.9.6.5.22 | wfFrSwUsageCurVolumeBackup | 1 | 1 | curent backup file system volume number used. This number is the same as wfFrSwUsageVolumeBackUp except when the user sets wfFrSw… |
| 1.3.6.1.4.1.18.3.5.9.6.5.23 | wfFrSwUsageCurDirectory | 1 | 1 | current directory name used. This number is the same as wfFrSwUsageDirectory except when the user sets wfFrSwUsageDirectory to an… |
| 1.3.6.1.4.1.18.3.5.9.6.5.24 | wfFrSwUsageCurFilePrefix | 1 | 1 | current base file name used. This number is the same as wfFrSwUsageFilePrefix except when the user sets wfFrSwUsageFilePrefix to … |
| 1.3.6.1.4.1.18.3.5.9.6.5.25 | wfFrSwUsageCurTimerInterval | 1 | 1 | current timer interval number used. This number is the same as wfFrSwUsageTimerInterval except when the user sets wfFrSwUsageTime… |
| 1.3.6.1.4.1.18.3.5.9.6.5.26 | wfFrSwUsageCurUpdateInterval | 1 | 1 | current update interval number used. This number is the same as wfFrSwUsageUpdateInterval except when the user sets wfFrSwUsageUp… |
| 1.3.6.1.4.1.18.3.5.9.6.5.27 | wfFrSwUsageCurStoreInterval | 1 | 1 | current store timer interval number used. This number is the same as wfFrSwUsageStoreInterval except when the user sets wfFrSwUsa… |
| 1.3.6.1.4.1.18.3.5.9.6.5.28 | wfFrSwUsageCurFlushInterval | 1 | 1 | current flush timer interval number used. This number is the same as wfFrSwUsageFlushInterval except when the user sets wfFrSwUsa… |
| 1.3.6.1.4.1.18.3.5.9.6.5.29 | wfFrSwUsageCurCleanupInterval | 1 | 1 | current file cleanup timer interval number used. This number is the same as wfFrSwUsageCleanupInterval except when the user sets … |
| 1.3.6.1.4.1.18.3.5.9.6.5.30 | wfFrSwUsageDebug | 1 | 1 | Enable/Disable printing of debug edl (trap) messages. NOTE: Do not enable this attribute in operational enviornment as it will li… |
| 1.3.6.1.4.1.18.3.5.9.6.5.31 | wfFrSwUsageCurDebug | 1 | 1 | current debug value used. This value is the same as wfFrSwUsageDebug except when the user sets wfFrSwUsageDeubg to an invalid val… |
| 1.3.6.1.4.1.18.3.5.9.6.5.32 | wfFrSwUsageSwitchId | 1 | 1 | switch id used in the billing usage data file. |
| 1.3.6.1.4.1.18.3.5.9.6.5.33 | wfFrSwUsageNumEntries | 1 | 1 | number of entries in wfFrSwUsageTable |
| 1.3.6.1.4.1.18.3.5.9.6.5.34 | wfFrSwSvcUsageEnable, wfFrSwUsageNumTuples | 1 | 1 | Enable/Disable FRSW SVC billing. |
| 1.3.6.1.4.1.18.3.5.9.6.5.35 | wfFrSwSvcUsageInterimRecordEnable, wfFrSwUsageNumDlCcts | 1 | 1 | number of dlci configured on this node |
| 1.3.6.1.4.1.18.3.5.9.6.5.36 | wfFrSwSvcUsageVolume | 1 | 1 | Indicates the file system volume number to which the SVC billing usage data files will be written. The volume number corresponds… |
| 1.3.6.1.4.1.18.3.5.9.6.5.37 | wfFrSwSvcUsageDirectory | 1 | 1 | The name of the directory where the SVC billing usage data files are stored. |
| 1.3.6.1.4.1.18.3.5.9.6.5.38 | wfFrSwSvcUsageFilePrefix | 1 | 1 | The base name of SVC billing usage data files. |
| 1.3.6.1.4.1.18.3.5.9.6.5.39 | wfFrSwSvcUsageUpdateInterval | 1 | 1 | This number specifies the interval (number of minutes) for the SVC Billing process to collect and update billing usage data in th… |
| 1.3.6.1.4.1.18.3.5.9.6.5.40 | wfFrSwSvcUsageStoreInterval | 1 | 1 | This number specifies the interval (number of minutes) for the SVC Billing process to write billing usage data on to the file sys… |
| 1.3.6.1.4.1.18.3.5.9.6.5.41 | wfFrSwSvcUsageFlushInterval | 1 | 1 | This number specifies the interval (number of minutes) for the SVC Billing process to write billing usage data on to the file sys… |
| 1.3.6.1.4.1.18.3.5.9.6.5.42 | wfFrSwSvcUsageCleanupInterval | 1 | 1 | This is the interval (number of minutes) for the SVC Billing process to check and delete old billing usage data files. Note: When… |
| 1.3.6.1.4.1.18.3.5.9.6.5.43 | wfFrSwSvcUsageUpdateTimeStamp | 1 | 1 | Time stamp of last wfFrSwSvcUsageUpdateInterval timer expiration or the starting time of the current wfFrSwSvcUsageUpdateInterval… |
| 1.3.6.1.4.1.18.3.5.9.6.5.44 | wfFrSwSvcUsageStoreTimeStamp | 1 | 1 | Time stamp of last wfFrSwSvcUsageStoreInterval timer expiration or the starting time of the current wfFrSwSvcUsageStoreInterval. … |
| 1.3.6.1.4.1.18.3.5.9.6.5.45 | wfFrSwSvcUsageFlushTimeStamp | 1 | 1 | wfFrSwSvcUsageFlushtimeStamp |
| 1.3.6.1.4.1.18.3.5.9.6.5.46 | wfFrSwSvcUsageCleanupTimeStamp | 1 | 1 | Time stamp of last wfFrSwSvcUsageCleanupInterval timer expiration or the starting time of the current wfFrSwSvcUsageCleanupInterv… |
| 1.3.6.1.4.1.18.3.5.9.6.5.47 | wfFrSwSvcUsageUpdateData | 1 | 1 | Setting this attribute to a non-zero value will cause an immediate updating of the SVC billing usage data. Once activated, this a… |
| 1.3.6.1.4.1.18.3.5.9.6.5.48 | wfFrSwSvcUsageStoreData | 1 | 1 | Setting this attribute to a non-zero value will cause an immediate updating and writing of the SVC billing usage data. Once activ… |
| 1.3.6.1.4.1.18.3.5.9.6.5.49 | wfFrSwSvcUsageFlushData | 1 | 1 | Setting this attribute to a non-zero value will cause an immediate updating and writing of the SVC billing usage data and followe… |
| 1.3.6.1.4.1.18.3.5.9.6.5.50 | wfFrSwSvcUsageFileCleanup | 1 | 1 | Setting this attribute to a non-zero value will cause an immediate checking and deleting old SVC billing usage data files. Once a… |
| 1.3.6.1.4.1.18.3.5.9.6.5.51 | wfFrSwSvcUsageState | 1 | 1 | current state FRSW SVC billing. |
| 1.3.6.1.4.1.18.3.5.9.6.5.52 | wfFrSwSvcUsageCurVolume | 1 | 1 | current file system volume number used for SVC Billing. This number is the same as wfFrSwSvcUsageVolume except when the user sets… |
| 1.3.6.1.4.1.18.3.5.9.6.5.53 | wfFrSwSvcUsageCurDirectory | 1 | 1 | current directory name used for SVC Billing. This number is the same as wfFrSwSvcUsageDirectory except when the user sets wfFrSwS… |
| 1.3.6.1.4.1.18.3.5.9.6.5.54 | wfFrSwSvcUsageCurFilePrefix | 1 | 1 | current base file name used for SVC Billing. This name is the same as wfFrSwSvcUsageFilePrefix except when the user sets wfFrSwSv… |
| 1.3.6.1.4.1.18.3.5.9.6.5.55 | wfFrSwSvcUsageCurUpdateInterval | 1 | 1 | current update interval number used. This number is the same as wfFrSwSvcUsageUpdateInterval except when the user sets wfFrSwSvcU… |
| 1.3.6.1.4.1.18.3.5.9.6.5.56 | wfFrSwSvcUsageCurStoreInterval | 1 | 1 | current store timer interval number used. This number is the same as wfFrSwSvcUsageStoreInterval except when the user sets wfFrSw… |
| 1.3.6.1.4.1.18.3.5.9.6.5.57 | wfFrSwSvcUsageCurFlushInterval | 1 | 1 | current flush timer interval number used. This number is the same as wfFrSwSvcUsageFlushInterval except when the user sets wfFrSw… |
| 1.3.6.1.4.1.18.3.5.9.6.5.58 | wfFrSwSvcUsageCurCleanupInterval | 1 | 1 | current file cleanup timer interval number used. This number is the same as wfFrSwSvcUsageCleanupInterval except when the user se… |
| 1.3.6.1.4.1.18.3.5.9.6.5.59 | wfFrSwSvcUsageNumEntries | 1 | 1 | number of entries in wfFrSwSvcUsageTable |
| 1.3.6.1.4.1.18.3.5.9.6.5.60 | wfFrSwSvcUsageVersionId | 1 | 1 | The Software Version ID field is a two byte, right justified, binary formated value that identifies the particular version number… |
| 1.3.6.1.4.1.18.3.5.9.6.5.61 | wfFrSwUsageSwitchName | 1 | 1 | The Switch name is a 6-bytes, right justified with leading blanks as necessary. It can be combination of letters, numbers and bla… |
| 1.3.6.1.4.1.18.3.5.9.6.5.62 | wfFrSwPvcUsageFileLayout | 1 | 1 | PVC usage file layout version |
| 1.3.6.1.4.1.18.3.5.9.6.5.63 | wfFrSwSvcUsageFileLayout | 1 | 1 | SVC usage file layout version |