This indicates the status of the Frame Relay interface
as determined by the performance of the dlcmi. If no
dlcmi is running, the Frame Relay interface will stay
in the running state indefinitely.
Parsed from file fr2.mib.txt
Company: None
Module: Wellfleet-FR2-MIB
This indicates the status of the Frame Relay interface
as determined by the performance of the dlcmi. If no
dlcmi is running, the Frame Relay interface will stay
in the running state indefinitely.
Parsed from file Wellfleet-FR2-MIB.mib
Module: Wellfleet-FR2-MIB
Vendor: Wellfleet
Module: Wellfleet-FR2-MIB
[Automatically extracted from oidview.com]
wfFrMapDlcmiStatus OBJECT-TYPE SYNTAX INTEGER { running (1), fault (2), initializing (3) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the status of the Frame Relay interface as determined by the performance of the dlcmi. If no dlcmi is running, the Frame Relay interface will stay in the running state indefinitely." ::= { wfFrMapDlcmiEntry 11 }
wfFrMapDlcmiStatus OBJECT-TYPE SYNTAX INTEGER { running (1), fault (2), initializing (3) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the status of the Frame Relay interface as determined by the performance of the dlcmi. If no dlcmi is running, the Frame Relay interface will stay in the running state indefinitely." ::= { wfFrMapDlcmiEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.9.16.1.1 | wfFrMapDlcmiIfIndex | 0 | 0 | The ifIndex value of the corresponding ifEntry. |
| 1.3.6.1.4.1.18.3.5.9.9.16.1.2 | wfFrMapDlcmiState | 0 | 0 | This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame … |
| 1.3.6.1.4.1.18.3.5.9.9.16.1.3 | wfFrMapDlcmiAddress | 0 | 0 | This variable states which address format is in use on the Frame Relay interface. |
| 1.3.6.1.4.1.18.3.5.9.9.16.1.4 | wfFrMapDlcmiAddressLen | 0 | 0 | This variable states the address length in octets. In the case of Q922 format, the length indicates the entire length of the add… |
| 1.3.6.1.4.1.18.3.5.9.9.16.1.5 | wfFrMapDlcmiPollingInterval | 0 | 0 | This is the number of seconds between successive status enquiry messages. |
| 1.3.6.1.4.1.18.3.5.9.9.16.1.6 | wfFrMapDlcmiFullEnquiryInterval | 0 | 0 | Number of status enquiry intervals that pass before issuance of a full status enquiry message. |
| 1.3.6.1.4.1.18.3.5.9.9.16.1.7 | wfFrMapDlcmiErrorThreshold | 0 | 0 | This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down. |
| 1.3.6.1.4.1.18.3.5.9.9.16.1.8 | wfFrMapDlcmiMonitoredEvents | 0 | 0 | This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvent… |
| 1.3.6.1.4.1.18.3.5.9.9.16.1.9 | wfFrMapDlcmiMaxSupportedVCs | 0 | 0 | The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a … |
| 1.3.6.1.4.1.18.3.5.9.9.16.1.10 | wfFrMapDlcmiMulticast | 0 | 0 | This indicates whether the Frame Relay interface is using a multicast service. |
| 1.3.6.1.4.1.18.3.5.9.9.16.1.12 | wfFrMapDlcmiRowStatus | 0 | 0 | SNMP Version 2 Row Status Variable. Writable objects in the table may be written in any RowStatus state. |
| 1.3.6.1.4.1.18.3.5.9.9.16.1.13 | wfFrMapDlcmiLineNumber | 0 | 0 | Instance identifier. This is the line number on which the associated Frame Relay interface resides. |
| 1.3.6.1.4.1.18.3.5.9.9.16.1.14 | wfFrMapDlcmiLLIndex | 0 | 0 | The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical… |