The Lower layer index uniquely identifies the lower layer in
cases where the lower layer may be something other than the
physical layer. For example if Frame Relay is running over
an ATM VC, the LLIndex identifies the ATM VC.
Parsed from file fr2.mib.txt
Company: None
Module: Wellfleet-FR2-MIB
The Lower layer index uniquely identifies the lower layer in
cases where the lower layer may be something other than the
physical layer. For example if Frame Relay is running over
an ATM VC, the LLIndex identifies the ATM VC.
Parsed from file Wellfleet-FR2-MIB.mib
Module: Wellfleet-FR2-MIB
Vendor: Wellfleet
Module: Wellfleet-FR2-MIB
[Automatically extracted from oidview.com]
wfFrCircuitLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer. For example if Frame Relay is running over an ATM VC, the LLIndex identifies the ATM VC." ::= { wfFrVCircuitEntry 3 }
wfFrCircuitLLIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer. For example if Frame Relay is running over an ATM VC, the LLIndex identifies the ATM VC." ::= { wfFrVCircuitEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.9.2.1.1 | wfFrCircuitDelete | 0 | 0 | Indication to delete this frame relay interface. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.2 | wfFrCircuitLineNumber | 0 | 0 | Instance identifier. This is the line number on which the associated Frame Relay interface resides. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.4 | wfFrCircuitNumber | 0 | 0 | The circuit number of this interface. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.5 | wfFrCircuitDlci | 0 | 0 | One of three instance identifier. This is the Frame Relay 'address' of the virtual circuit. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.6 | wfFrCircuitState | 0 | 0 | Indicates the state of the particular virtual circuit. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.7 | wfFrCircuitStateSet | 0 | 0 | User access for setting the state of a virtual circuit |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.8 | wfFrCircuitReceivedFECNs | 0 | 0 | Number of frames received indicating forward congestion. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.9 | wfFrCircuitReceivedBECNs | 0 | 0 | Number of frames received indicating backward congestion. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.10 | wfFrCircuitSentFrames | 0 | 0 | The number of frames sent from this virtual circuit. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.11 | wfFrCircuitSentOctets | 0 | 0 | The number of octets sent from this virtual circuit. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.12 | wfFrCircuitReceivedFrames | 0 | 0 | The number of frames received from this virtual circuit. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.13 | wfFrCircuitReceivedOctets | 0 | 0 | The number of octets received from this virtual circuit. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.14 | wfFrCircuitCreationTime | 0 | 0 | The value of sysUpTime when the vc was created. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.15 | wfFrCircuitLastTimeChange | 0 | 0 | The value of sysUpTime when last there was a change in vc state. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.16 | wfFrCircuitCommittedBurst | 0 | 0 | Indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measureme… |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.17 | wfFrCircuitExcessBurst | 0 | 0 | Indicates teh maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.18 | wfFrCircuitThroughput | 0 | 0 | This is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one… |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.19 | wfFrCircuitMulticast | 0 | 0 | Indicates whether this DLCI is used for multicast or single destination. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.20 | wfFrCircuitType | 0 | 0 | Indication of whether the VC was manually created (static), or dynamically created (dynamic) via the data link control management… |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.21 | wfFrCircuitDiscards | 0 | 0 | The number of inbound frames discarded because of format errors, because the VC is inactive or because the protocol was not regi… |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.22 | wfFrCircuitDrops | 0 | 0 | Indicates how many outbound frames were dropped. Usually these are dropped because the VC is not active. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.23 | wfFrCircuitSubCct | 0 | 0 | Circuit number to use for this VC when configured in hybrid (for bridging) or direct access (VC as a circuit) mode. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.24 | wfFrCircuitMode | 0 | 0 | The mode of the given VC. GROUP - treats the VC as one of many vc's on a circuit. HYBRID - treats the VC as one of many vc's on a… |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.25 | wfFrCircuitCongestionDisable | 0 | 0 | This indicates whether the congestion algorithm should be used for this VC. If this is not set, the value is inherited from the… |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.26 | wfFrCircuitCongestionState | 0 | 0 | This is used to indicate whether or not the VC is in a congested state. If it is, no traffic will be sent on this VC. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.27 | wfFrCircuitCongestionTmr | 0 | 0 | This is the time period over which congestion notifications are counted. It is also the period during which the VC will cease se… |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.28 | wfFrCircuitCongestionCtr | 0 | 0 | This represents the number of congestion notifications, when received within wfFrCircuitCongestionTmr time, that will result in t… |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.29 | wfFrCircuitWcpEnable | 0 | 0 | Enable Compression |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.30 | wfFrCircuitPrimaryHoldTmr | 0 | 0 | The maximum number of seconds that a Frame Relay PVC Primary will be kept inactive, ignoring status messages, when it is terminat… |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.31 | wfFrCircuitInactivityTimer | 0 | 0 | Inactivity Timer for SVCs. Zero disables timer. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.32 | wfFrCircuitInactivityMode | 0 | 0 | Specifies which packets will reset the SVC inactivity timer. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.33 | wfFrCircuitCongestionMethod | 0 | 0 | The congestion method to use on this VC. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.34 | wfFrCircuitShapedHiXmits | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsHiXmits for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.35 | wfFrCircuitShapedNormalXmits | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsNormalXmits for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.36 | wfFrCircuitShapedLoXmits | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsLoXmits for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.37 | wfFrCircuitShapedHiClippedPkts | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsHiClippedPkts for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.38 | wfFrCircuitShapedNormalClippedPkts | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsNormalClippedPkts for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.39 | wfFrCircuitShapedLoClippedPkts | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsLoClippedPkts for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.40 | wfFrCircuitShapedHiQHighWaterPkts | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsHiQHighWaterPkts for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.41 | wfFrCircuitShapedNormalQHighWaterPkts | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsNormalQHighWaterPkts for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.42 | wfFrCircuitShapedLoQHighWaterPkts | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsLoQHighWaterPkts for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.43 | wfFrCircuitShapedDroppedPkts | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsDroppedPkts for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.44 | wfFrCircuitShapedLargePkts | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsLargePkts for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.45 | wfFrCircuitShapedHiTotalOctets | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsHiTotalOctets for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.46 | wfFrCircuitShapedNormalTotalOctets | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsNormalTotalOctets for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.47 | wfFrCircuitShapedLoTotalOctets | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsLoTotalOctets for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.48 | wfFrCircuitShapedPktsNotQueued | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsPktsNotQueued for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.49 | wfFrCircuitShapedHighWaterPktsClear | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsHighWaterPktsClear for this VC |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.50 | wfFrCircuitShapedHiQueueLimit | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsHighPriorityQueueLimit for this VC. If set to inherit (0), then the VC uses part of the global al… |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.51 | wfFrCircuitShapedNormalQueueLimit | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsNormalPriorityQueueLimit for this VC. If set to inherit (0), then the VC uses part of the global … |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.52 | wfFrCircuitShapedLoQueueLimit | 0 | 0 | Same as wfCctOptsEntry.wfCctOptsLowPriorityQueueLimit for this VC. If set to inherit (0), then the VC uses part of the global all… |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.53 | wfFrCircuitStartupDelay | 0 | 0 | Number of seconds the VC should wait before creating the circuit or doing a dp_vc_line. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.54 | wfFrCircuitCurHiQueueLimit | 0 | 0 | This is the current high queue limit, based on the VC and DLCMI configuration. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.55 | wfFrCircuitCurNormalQueueLimit | 0 | 0 | This is the current normal queue limit, based on the VC and DLCMI configuration. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.56 | wfFrCircuitCurLoQueueLimit | 0 | 0 | This is the current low queue limit, based on the VC and DLCMI configuration. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.57 | wfFrCircuitShapingState | 0 | 0 | Indicates current state of a VCs traffic shaping configuration |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.58 | wfFrCircuitBwThreshold | 0 | 0 | Set 3 to 10 times of the CIR configured with this PVC. The threshold value for starting to send Normal and Low Priority traffic i… |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.59 | wfFrCircuitReceivedDEs | 0 | 0 | Number of frames received from the network indicating that they were eligible for discard since the virtual circuit was created. … |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.60 | wfFrCircuitSentDEs | 0 | 0 | Number of frames sent from the network indicating that they were eligible for discard since the virtual circuit was created. This… |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.61 | wfFrCircuitShapedHiQLength | 0 | 0 | None |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.62 | wfFrCircuitShapedNormalQLength | 0 | 0 | None |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.63 | wfFrCircuitShapedLoQLength | 0 | 0 | None |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.64 | wfFrCircuitFrf9Enable | 0 | 0 | Enable for FRF.9 compression on this Virtual Circuit |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.65 | wfFrCircuitFrf9MinCompressSize | 0 | 0 | The minimum size required for compression of an outgoing frame. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.66 | wfFrCircuitFragmentationEnable | 0 | 0 | enable/disable FRF.12 fragmentation for this circuit |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.67 | wfFrCircuitFragmentationType | 0 | 0 | Defines the type of fragmentation to be used on this circuit |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.68 | wfFrCircuitFragmentationTriggerSize | 0 | 0 | This is the minimum size of a packet to be fragmented on this circuit |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.69 | wfFrCircuitFragmentationDebugLevel | 0 | 0 | Level of debug log messaging requested for FRF.12 fragmentation operations, 1 is disabled |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.70 | wfFrCircuitFragmentationPktsFragmented | 0 | 0 | The number of packets fragmented. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.71 | wfFrCircuitFragmentationFragFails | 0 | 0 | The number of unsuccessful fragmentation attempts due to lack of resources. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.72 | wfFrCircuitFragmentationSeqErrors | 0 | 0 | The number of received fragments with sequence number errors. |
| 1.3.6.1.4.1.18.3.5.9.9.2.1.73 | wfFrCircuitFragmentationReasmFails | 0 | 0 | The number of failed packet reassembly attempts. |