The operation to be performed on the configured ethernet
bridge.
To add a configured bridge, first reserve an unallocated
ethBridgeIndex value by getting ethBridgeIndexNext. Next, set
all desired and/or non-defaulting read-write objects in the
row, and then set ethBridgeOperation to 'add'. Upon a
successful add operation, the bridge will be held in a 'not
valid' and 'pending add' state for a short period of time,
until the hardware has been fully updated, at which point the
configuration will be put in a 'valid' state. Upon an
unsuccessful add operation, the reason for the failure may be
determined by getting the ethBridgeFailureCode object, using
the same index value as was used in the unsuccessful add
operation.
To delete a configured bridge, set ethBridgeOperation to
'delete'. Upon a successful delete operation, the bridge will
be held in a 'valid' and 'pending delete' state for a short
period of time, until the hardware has been fully updated, at
which point the bridge will be put in a 'not valid' state. An
attempt to delete an already invalid bridge will always be
successful, although the bridge will not pass through a
'pending delete' state.
Although the parameters of an existing bridge may not be
modified directly, a 'modify' operation may simulated by a
'delete' operation followed by an 'add' operation. Note that
since the added bridge is essentially new, it needs an
entirely new ethBridgeIndex value reserved for it, since the
ethBridgeIndex value previously used for the deleted bridge
may not be freed in time for use by the new bridge to be
added. It is thus strongly urged that a new bridge be added
using a unique ethBridgeIndex that has been safely dispensed
by first getting ethBridgeIndexNext.
Parsed from file CP300.mib.txt
Company: marconi
Module: AAC3-MIB
Vendor: ADC Kentrox
Module: AAC3-MIB (aac3-140.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
ethBridgeOperation OBJECT-TYPE SYNTAX INTEGER { add(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The operation to be performed on the configured ethernet bridge. To add a configured bridge, first reserve an unallocated ethBridgeIndex value by getting ethBridgeIndexNext. Next, set all desired and/or non-defaulting read-write objects in the row, and then set ethBridgeOperation to 'add'. Upon a successful add operation, the bridge will be held in a 'not valid' and 'pending add' state for a short period of time, until the hardware has been fully updated, at which point the configuration will be put in a 'valid' state. Upon an unsuccessful add operation, the reason for the failure may be determined by getting the ethBridgeFailureCode object, using the same index value as was used in the unsuccessful add operation. To delete a configured bridge, set ethBridgeOperation to 'delete'. Upon a successful delete operation, the bridge will be held in a 'valid' and 'pending delete' state for a short period of time, until the hardware has been fully updated, at which point the bridge will be put in a 'not valid' state. An attempt to delete an already invalid bridge will always be successful, although the bridge will not pass through a 'pending delete' state. Although the parameters of an existing bridge may not be modified directly, a 'modify' operation may simulated by a 'delete' operation followed by an 'add' operation. Note that since the added bridge is essentially new, it needs an entirely new ethBridgeIndex value reserved for it, since the ethBridgeIndex value previously used for the deleted bridge may not be freed in time for use by the new bridge to be added. It is thus strongly urged that a new bridge be added using a unique ethBridgeIndex that has been safely dispensed by first getting ethBridgeIndexNext." ::= { ethBridgeEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.181.1.13.6.10.2.3.1.1 | ethBridgeIndex | 0 | 0 | The index variable which uniquely identifies the ethernet bridge, for the purposes of setting or getting the ethernet bridge's pa… |
| 1.3.6.1.4.1.181.1.13.6.10.2.3.1.2 | ethBridgeStatus | 0 | 0 | The current status of the configured ethernet bridge entry, represented as a sum of the following bit values: 1 valid … |
| 1.3.6.1.4.1.181.1.13.6.10.2.3.1.4 | ethBridgeFailureCode | 0 | 0 | The specific reason for a failed 'add' operation. |
| 1.3.6.1.4.1.181.1.13.6.10.2.3.1.5 | ethBridgeName | 0 | 0 | An arbitrary ASCII name to be associated with this ethernet bridge. |
| 1.3.6.1.4.1.181.1.13.6.10.2.3.1.6 | ethBridgeType | 0 | 0 | An indication of whether this ethernet bridge is a local or a remote bridge. A local bridge resides on one port of an ethernet P… |
| 1.3.6.1.4.1.181.1.13.6.10.2.3.1.7 | ethBridgePortIndex | 0 | 0 | The system port on which this bridge is located. It has the same value as the portIndex variable in the portTable. Note that wh… |
| 1.3.6.1.4.1.181.1.13.6.10.2.3.1.8 | ethBridgeGroupIndex | 0 | 0 | The bridge group to which this bridge belongs. It has the same value as the ethGroupIndex in the ethGroupTable. |
| 1.3.6.1.4.1.181.1.13.6.10.2.3.1.9 | ethBridgeNumValidBinds | 0 | 0 | The number of valid entries in the binding table entries for this bridge. |
| 1.3.6.1.4.1.181.1.13.6.10.2.3.1.10 | ethBridgeNumInvalidBinds | 0 | 0 | The number of invalid entries in the binding table entries for this bridge. |
| 1.3.6.1.4.1.181.1.13.6.10.2.3.1.11 | ethBridgePortNext | 0 | 0 | The ethBridgeIndex value for the next bridge on the same system port as this bridge, sorted by the ethBridgeIndex values. A valu… |
| 1.3.6.1.4.1.181.1.13.6.10.2.3.1.12 | ethBridgePortPrev | 0 | 0 | The ethBridgeIndex value for the previous bridge on the same system port as this bridge, sorted by the ethBridgeIndex values. A … |
| 1.3.6.1.4.1.181.1.13.6.10.2.3.1.13 | ethBridgeGroupNext | 0 | 0 | The ethBridgeIndex value for the next bridge in the same bridge group as this bridge, sorted by the ethBridgeIndex values. A val… |
| 1.3.6.1.4.1.181.1.13.6.10.2.3.1.14 | ethBridgeGroupPrev | 0 | 0 | The ethBridgeIndex value for the previous bridge in the same bridge group as this bridge, sorted by the ethBridgeIndex values. A… |