Enable or disable TCP FIN packet.
Parsed from file alteon-6042switch.mib.txt
Company: None
Module: ALTEON-PRIVATE-MIBS
Enable or disable TCP FIN packet.
Parsed from file ALTEON-PRIVATE-MIBS.mib
Module: ALTEON-PRIVATE-MIBS
Vendor: Alteon Networks, Inc.
Module: ALTEON-PRIVATE-MIBS
[Automatically extracted from oidview.com]
fltCurCfgAclTcpFin OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable TCP FIN packet." ::= { fltCurCfgTableEntry 30 }
fltCurCfgAclTcpFin OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Enable or disable TCP FIN packet." ::= { fltCurCfgTableEntry 30 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1872.2.1.10.2.1.1 | fltCurCfgIndx | 0 | 0 | The filtering table index. |
1.3.6.1.4.1.1872.2.1.10.2.1.2 | fltCurCfgSrcIp | 0 | 0 | The source IP address to be filtered. |
1.3.6.1.4.1.1872.2.1.10.2.1.3 | fltCurCfgSrcIpMask | 0 | 0 | The source IP sub-net mask for filtering. |
1.3.6.1.4.1.1872.2.1.10.2.1.4 | fltCurCfgDstIp | 0 | 0 | The destination IP address to be filtered. |
1.3.6.1.4.1.1872.2.1.10.2.1.5 | fltCurCfgDstIpMask | 0 | 0 | The destination IP sub-net mask for filtering. |
1.3.6.1.4.1.1872.2.1.10.2.1.6 | fltCurCfgProtocol | 0 | 0 | The protocol to be filtered. |
1.3.6.1.4.1.1872.2.1.10.2.1.7 | fltCurCfgRangeHighSrcPort | 0 | 0 | The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. … |
1.3.6.1.4.1.1872.2.1.10.2.1.8 | fltCurCfgRangeLowSrcPort | 0 | 0 | The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TCP. '… |
1.3.6.1.4.1.1872.2.1.10.2.1.9 | fltCurCfgRangeLowDstPort | 0 | 0 | The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or TC… |
1.3.6.1.4.1.1872.2.1.10.2.1.10 | fltCurCfgRangeHighDstPort | 0 | 0 | The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltCurCfgProtocol is UDP or T… |
1.3.6.1.4.1.1872.2.1.10.2.1.11 | fltCurCfgAction | 0 | 0 | The action for the filtering rule. |
1.3.6.1.4.1.1872.2.1.10.2.1.12 | fltCurCfgRedirPort | 0 | 0 | The real server port number used for redirection. |
1.3.6.1.4.1.1872.2.1.10.2.1.13 | fltCurCfgRedirGroup | 0 | 0 | The real server group to be redirected to. |
1.3.6.1.4.1.1872.2.1.10.2.1.14 | fltCurCfgLog | 0 | 0 | Enable or disable logging. |
1.3.6.1.4.1.1872.2.1.10.2.1.15 | fltCurCfgState | 0 | 0 | The state of this filtering rule. |
1.3.6.1.4.1.1872.2.1.10.2.1.16 | fltCurCfgNat | 0 | 0 | The selection of destination or source for network address translatin. |
1.3.6.1.4.1.1872.2.1.10.2.1.17 | fltCurCfgCache | 0 | 0 | Enable or disable caching sessions that match filter. |
1.3.6.1.4.1.1872.2.1.10.2.1.18 | fltCurCfgInvert | 0 | 0 | Turn the invert logic on or off for the filter entry. |
1.3.6.1.4.1.1872.2.1.10.2.1.19 | fltCurCfgClientProxy | 0 | 0 | Enable or disable client proxy. |
1.3.6.1.4.1.1872.2.1.10.2.1.20 | fltCurCfgTcpAck | 0 | 0 | Enable or disable filtering on matching TCP ACK and RST flag. |
1.3.6.1.4.1.1872.2.1.10.2.1.21 | fltCurCfgUrlRedir | 0 | 0 | Enable or disable URL redirection. The URL expressions are defined in slbCurCfgUrlTable. |
1.3.6.1.4.1.1872.2.1.10.2.1.22 | fltCurCfgSrcMac | 0 | 0 | The source MAC address to be filtered. |
1.3.6.1.4.1.1872.2.1.10.2.1.23 | fltCurCfgDstMac | 0 | 0 | The Destination MAC address to be filtered. |
1.3.6.1.4.1.1872.2.1.10.2.1.24 | fltCurCfgFtpNatActive | 0 | 0 | Enable or disable FTP NAT for active ftp only. |
1.3.6.1.4.1.1872.2.1.10.2.1.25 | fltCurCfgAclTcpUrg | 0 | 0 | Enable or disable TCP URG packet. |
1.3.6.1.4.1.1872.2.1.10.2.1.26 | fltCurCfgAclTcpAck | 0 | 0 | Enable or disable TCP ACK packet. |
1.3.6.1.4.1.1872.2.1.10.2.1.27 | fltCurCfgAclTcpPsh | 0 | 0 | Enable or disable TCP PSH packet. |
1.3.6.1.4.1.1872.2.1.10.2.1.28 | fltCurCfgAclTcpRst | 0 | 0 | Enable or disable TCP RST packet. |
1.3.6.1.4.1.1872.2.1.10.2.1.29 | fltCurCfgAclTcpSyn | 0 | 0 | Enable or disable TCP SYN packet. |
1.3.6.1.4.1.1872.2.1.10.2.1.31 | fltCurCfgAclIcmp | 0 | 0 | ICMP type to be filtered. |
1.3.6.1.4.1.1872.2.1.10.2.1.32 | fltCurCfgAclIpOption | 0 | 0 | Select an IP option to filter. |
1.3.6.1.4.1.1872.2.1.10.2.1.33 | fltCurCfgBwmContract | 0 | 0 | Filt default BW contract number. |
1.3.6.1.4.1.1872.2.1.10.2.1.34 | fltCurCfgAclIpTos | 0 | 0 | The IP TOS value to be filtered. |
1.3.6.1.4.1.1872.2.1.10.2.1.35 | fltCurCfgAclIpTosMask | 0 | 0 | The IP TOS mask for filtering. |
1.3.6.1.4.1.1872.2.1.10.2.1.36 | fltCurCfgAclIpTosNew | 0 | 0 | The new IP TOS value to over-write when filtering fired. |
1.3.6.1.4.1.1872.2.1.10.2.1.37 | fltCurCfgFwlb | 0 | 0 | Enable or disable filtering on firewall redirect hash method. |
1.3.6.1.4.1.1872.2.1.10.2.1.38 | fltCurCfgNatTimeout | 0 | 0 | The NAT session timeout. The timeout value should be an even number between (4..30) |
1.3.6.1.4.1.1872.2.1.10.2.1.39 | fltCurCfgRurl | 0 | 0 | Enable or disable RURL parsing. |
1.3.6.1.4.1.1872.2.1.10.2.1.40 | fltCurCfgLinklb | 0 | 0 | Enable or disable WAN link load balancing. |
1.3.6.1.4.1.1872.2.1.10.2.1.41 | fltCurCfgWapRadiusSnoop | 0 | 0 | Enable or disable WAP RADIUS snooping. |
1.3.6.1.4.1.1872.2.1.10.2.1.42 | fltCurCfgSrcIpMac | 0 | 0 | Set a flag indicating whether filtering should be based on the source IP address or the source MAC address field. |
1.3.6.1.4.1.1872.2.1.10.2.1.43 | fltCurCfgDstIpMac | 0 | 0 | Set a flag indicating whether filtering should be based on the destination IP address or the destination MAC address field. |
1.3.6.1.4.1.1872.2.1.10.2.1.44 | fltCurCfgIdslbHash | 0 | 0 | Set hash parameter for intrusion detection server load balancing. |
1.3.6.1.4.1.1872.2.1.10.2.1.45 | fltCurCfgVlan | 0 | 0 | Set the VLAN assoicated with the filter. |
1.3.6.1.4.1.1872.2.1.10.2.1.46 | fltCurCfgName | 0 | 0 | The name of the filter. |
1.3.6.1.4.1.1872.2.1.10.2.1.47 | fltCurCfgTcpRateLimit | 0 | 0 | Enable or disable TCP connection rate limiting. |
1.3.6.1.4.1.1872.2.1.10.2.1.48 | fltCurCfgTcpRateMaxConn | 0 | 0 | Set maximum connections (number of connections in units of 10) for TCP connection rate limiting. |
1.3.6.1.4.1.1872.2.1.10.2.1.49 | fltCurCfgHash | 0 | 0 | Set hash parameter for the filter. |
1.3.6.1.4.1.1872.2.1.10.2.1.50 | fltCurCfgNasa | 0 | 0 | Enable or disable NASA redirect to ISD. |
1.3.6.1.4.1.1872.2.1.10.2.1.51 | fltCurCfgLayer7DenyState | 0 | 0 | Enable or disable layer 7 deny filtering. |
1.3.6.1.4.1.1872.2.1.10.2.1.52 | fltCurCfgLayer7DenyUrlBmap | 0 | 0 | The URL strings selected for Layer 7 deny filters. The selected URL strings are presented in a bitmap format. in receiving order:… |