The NAT session timeout. The timeout value should be an even
number between (4..30)
Parsed from file tigonLayer4.mib.txt
Company: None
Module: ALTEON-TS-LAYER4-MIB
The NAT session timeout. The timeout value should be an even
number between (4..30)
Parsed from file ALTEON-TS-LAYER4-MIB.mib
Module: ALTEON-TS-LAYER4-MIB
Vendor: Alteon Networks, Inc.
Module: ALTEON-TS-LAYER4-MIB
[Automatically extracted from oidview.com]
fltNewCfgNatTimeout OBJECT-TYPE SYNTAX INTEGER (4..30) ACCESS read-write STATUS mandatory DESCRIPTION "The NAT session timeout. The timeout value should be an even number between (4..30)" ::= { fltNewCfgTableEntry 39 }
fltNewCfgNatTimeout OBJECT-TYPE SYNTAX INTEGER (4..30) ACCESS read-write STATUS mandatory DESCRIPTION "The NAT session timeout. The timeout value should be an even number between (4..30)" ::= { fltNewCfgTableEntry 39 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1872.2.1.10.3.1.1 | fltNewCfgIndx | 0 | 0 | The filtering table index. |
1.3.6.1.4.1.1872.2.1.10.3.1.2 | fltNewCfgSrcIp | 0 | 0 | The source IP address to be filtered. |
1.3.6.1.4.1.1872.2.1.10.3.1.3 | fltNewCfgSrcIpMask | 0 | 0 | The source IP sub-net mask for filtering. |
1.3.6.1.4.1.1872.2.1.10.3.1.4 | fltNewCfgDstIp | 0 | 0 | The destination IP address to be filtered. |
1.3.6.1.4.1.1872.2.1.10.3.1.5 | fltNewCfgDstIpMask | 0 | 0 | The destination IP sub-net mask for filtering. |
1.3.6.1.4.1.1872.2.1.10.3.1.6 | fltNewCfgProtocol | 0 | 0 | The protocol to be filtered. |
1.3.6.1.4.1.1872.2.1.10.3.1.7 | fltNewCfgRangeHighSrcPort | 0 | 0 | The higher source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. … |
1.3.6.1.4.1.1872.2.1.10.3.1.8 | fltNewCfgRangeLowSrcPort | 0 | 0 | The lower source TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TCP. '… |
1.3.6.1.4.1.1872.2.1.10.3.1.9 | fltNewCfgRangeLowDstPort | 0 | 0 | The lower destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or TC… |
1.3.6.1.4.1.1872.2.1.10.3.1.10 | fltNewCfgRangeHighDstPort | 0 | 0 | The higher destination TCP/UDP port number to be filtered. It applies only when protocol defined in fltNewCfgProtocol is UDP or T… |
1.3.6.1.4.1.1872.2.1.10.3.1.11 | fltNewCfgAction | 0 | 0 | The action for the filtering rule. |
1.3.6.1.4.1.1872.2.1.10.3.1.12 | fltNewCfgRedirPort | 0 | 0 | The real server port number used for redirection. |
1.3.6.1.4.1.1872.2.1.10.3.1.13 | fltNewCfgRedirGroup | 0 | 0 | The real server group to be redirected to. |
1.3.6.1.4.1.1872.2.1.10.3.1.14 | fltNewCfgLog | 0 | 0 | Enable or disable logging. |
1.3.6.1.4.1.1872.2.1.10.3.1.15 | fltNewCfgState | 0 | 0 | The state of this filtering rule. |
1.3.6.1.4.1.1872.2.1.10.3.1.16 | fltNewCfgDelete | 0 | 0 | When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything ot… |
1.3.6.1.4.1.1872.2.1.10.3.1.17 | fltNewCfgNat | 0 | 0 | The selection of destination or source for network address translatin. |
1.3.6.1.4.1.1872.2.1.10.3.1.18 | fltNewCfgCache | 0 | 0 | Enable or disable caching sessions that match filter. |
1.3.6.1.4.1.1872.2.1.10.3.1.19 | fltNewCfgInvert | 0 | 0 | Turn the invert logic on or off for the filter entry. |
1.3.6.1.4.1.1872.2.1.10.3.1.20 | fltNewCfgClientProxy | 0 | 0 | Enable or disable client proxy. |
1.3.6.1.4.1.1872.2.1.10.3.1.21 | fltNewCfgTcpAck | 0 | 0 | Enable or disable filtering on matching TCP ACK and RST flag. |
1.3.6.1.4.1.1872.2.1.10.3.1.22 | fltNewCfgUrlRedir | 0 | 0 | Enable or disable URL redirection. The URL expressions are defined in slbNewCfgUrlTable. |
1.3.6.1.4.1.1872.2.1.10.3.1.23 | fltNewCfgSrcMac | 0 | 0 | The source MAC address to be filtered. |
1.3.6.1.4.1.1872.2.1.10.3.1.24 | fltNewCfgDstMac | 0 | 0 | The Destination MAC address to be filtered. |
1.3.6.1.4.1.1872.2.1.10.3.1.25 | fltNewCfgFtpNatActive | 0 | 0 | Enable or disable FTP NAT for active ftp. |
1.3.6.1.4.1.1872.2.1.10.3.1.26 | fltNewCfgAclTcpUrg | 0 | 0 | E or disable TCP URG packet. |
1.3.6.1.4.1.1872.2.1.10.3.1.27 | fltNewCfgAclTcpAck | 0 | 0 | Enable or disable TCP ACK packet. |
1.3.6.1.4.1.1872.2.1.10.3.1.28 | fltNewCfgAclTcpPsh | 0 | 0 | Enable or disable TCP PSH packet. |
1.3.6.1.4.1.1872.2.1.10.3.1.29 | fltNewCfgAclTcpRst | 0 | 0 | Enable or disable TCP RST packet. |
1.3.6.1.4.1.1872.2.1.10.3.1.30 | fltNewCfgAclTcpSyn | 0 | 0 | Enable or disable TCP SYN packet. |
1.3.6.1.4.1.1872.2.1.10.3.1.31 | fltNewCfgAclTcpFin | 0 | 0 | Enable or disable TCP FIN packet. |
1.3.6.1.4.1.1872.2.1.10.3.1.32 | fltNewCfgAclIcmp | 0 | 0 | ICMP type to be filtered. |
1.3.6.1.4.1.1872.2.1.10.3.1.33 | fltNewCfgAclIpOption | 0 | 0 | Select an IP option to filter. |
1.3.6.1.4.1.1872.2.1.10.3.1.34 | fltNewCfgBwmContract | 0 | 0 | Filt default BW contract number. |
1.3.6.1.4.1.1872.2.1.10.3.1.35 | fltNewCfgAclIpTos | 0 | 0 | The IP TOS value to be filtered. |
1.3.6.1.4.1.1872.2.1.10.3.1.36 | fltNewCfgAclIpTosMask | 0 | 0 | The IP TOS mask for filtering. |
1.3.6.1.4.1.1872.2.1.10.3.1.37 | fltNewCfgAclIpTosNew | 0 | 0 | The new IP TOS value to over-write when filtering fired. |
1.3.6.1.4.1.1872.2.1.10.3.1.38 | fltNewCfgFwlb | 0 | 0 | Enable or disable filtering on firewall redirect hash method. |
1.3.6.1.4.1.1872.2.1.10.3.1.40 | fltNewCfgRurl | 0 | 0 | Enable or disable RURL parsing. |
1.3.6.1.4.1.1872.2.1.10.3.1.41 | fltNewCfgLinklb | 0 | 0 | Enable or disable WAN link load balancing. |
1.3.6.1.4.1.1872.2.1.10.3.1.42 | fltNewCfgWapRadiusSnoop | 0 | 0 | Enable or disable WAP RADIUS snooping. |
1.3.6.1.4.1.1872.2.1.10.3.1.43 | fltNewCfgSrcIpMac | 0 | 0 | Set a flag indicating whether filtering should be based on the source IP address or the source MAC address field. |
1.3.6.1.4.1.1872.2.1.10.3.1.44 | fltNewCfgDstIpMac | 0 | 0 | Set a flag indicating whether filtering should be based on the destination IP address or the destination MAC address field. |
1.3.6.1.4.1.1872.2.1.10.3.1.45 | fltNewCfgIdslbHash | 0 | 0 | Set hash parameter for intrusion detection server load balancing. |
1.3.6.1.4.1.1872.2.1.10.3.1.46 | fltNewCfgVlan | 0 | 0 | Set the VLAN assoicated with the filter. |
1.3.6.1.4.1.1872.2.1.10.3.1.47 | fltNewCfgName | 0 | 0 | The name of the filter. |
1.3.6.1.4.1.1872.2.1.10.3.1.48 | fltNewCfgTcpRateLimit | 0 | 0 | Enable or disable TCP connection rate limiting. |
1.3.6.1.4.1.1872.2.1.10.3.1.49 | fltNewCfgTcpRateMaxConn | 0 | 0 | Set maximum connections (number of connections in units of 10) for TCP connection rate limiting. |
1.3.6.1.4.1.1872.2.1.10.3.1.50 | fltNewCfgHash | 0 | 0 | Set hash parameter for the filter. |
1.3.6.1.4.1.1872.2.1.10.3.1.51 | fltNewCfgNasa | 0 | 0 | Enable or disable NASA redirect to ISD. |
1.3.6.1.4.1.1872.2.1.10.3.1.52 | fltNewCfgLayer7DenyState | 0 | 0 | Enable or disable layer 7 deny filtering. |
1.3.6.1.4.1.1872.2.1.10.3.1.53 | fltNewCfgLayer7DenyUrlBmap | 0 | 0 | The URL strings selected for Layer 7 deny filters. The selected URL strings are presented in a bitmap format. in receiving order:… |
1.3.6.1.4.1.1872.2.1.10.3.1.54 | fltNewCfgLayer7DenyAddUrl | 0 | 0 | The URL Path (slbCurCfgUrlLbPathIndex) to be added to the Layer 7 deny filter. A zero is returned when read. |
1.3.6.1.4.1.1872.2.1.10.3.1.55 | fltNewCfgLayer7DenyRemUrl | 0 | 0 | The URL Path (slbCurCfgUrlLbPathIndex) to be removed from the Layer 7 deny filter. A zero is returned when read. |