Indicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface (as defined in the
ifStackTable), and disabled(2) otherwise.
Parsed from file ALTEON-TS-PHYSICAL-MIB.mib
Module: ALTEON-TS-PHYSICAL-MIB
Vendor: Alteon Networks, Inc.
Module: ALTEON-TS-PHYSICAL-MIB
[Automatically extracted from oidview.com]
agPortCurCfgLinkTrap OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise." ::= { agPortCurCfgTableEntry 18 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.1 | agPortCurCfgIndx | 0 | 0 | The index of the row in port configurations table. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.2 | agPortCurCfgPrefLink | 0 | 0 | This is the preferred link. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.3 | agPortCurCfgBackLink | 0 | 0 | This is the backup link. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.4 | agPortCurCfgState | 0 | 0 | This is the state of the port. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.5 | agPortCurCfgVlanTag | 0 | 0 | This is VLAN tag state of the port |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.6 | agPortCurCfgStp | 0 | 0 | This object is used to turn Spanning Tree on or off for the port. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.7 | agPortCurCfgRmon | 0 | 0 | This object is used to turn RMON on or off on the port. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.8 | agPortCurCfgPVID | 0 | 0 | The default VLAN ID for the port. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.9 | agPortCurCfgFastEthAutoNeg | 0 | 0 | This object is used to turn the autonegotiation on or off for fast Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.10 | agPortCurCfgFastEthSpeed | 0 | 0 | Selects the port speed for fast Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.11 | agPortCurCfgFastEthMode | 0 | 0 | This object is used to select port mode for fast Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.12 | agPortCurCfgFastEthFctl | 0 | 0 | Selects the port flow control for fast Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.13 | agPortCurCfgGigEthAutoNeg | 0 | 0 | This object is used to turn the autonegotiation on or off for gigabit Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.14 | agPortCurCfgGigEthFctl | 0 | 0 | This object is used to select port flow control for gigabit Ethernet connection. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.15 | agPortCurCfgPortName | 0 | 0 | The switch port name. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.16 | agPortCurCfgBwmContract | 0 | 0 | The switch port Bandwidth Management contract number. |
| 1.3.6.1.4.1.1872.2.1.2.3.2.1.17 | agPortCurCfgDiscardNonIPs | 0 | 0 | Enable or disable to discard all non-IP traffic on the switch port. |