Enable or disable allow HTTP health check on any port.
If disabled the non-HTTP virtual services will use TCP Health Checks,
if enabled the HTTP Content Health Check will be sent to any port
except HTTPS (443) if properly configured.
Parsed from file ALTEON-TS-LAYER4-MIB.mib
Module: ALTEON-TS-LAYER4-MIB
Vendor: Alteon Networks, Inc.
Module: ALTEON-TS-LAYER4-MIB
[Automatically extracted from oidview.com]
slbNewCfgAllowHttpHc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable allow HTTP health check on any port. If disabled the non-HTTP virtual services will use TCP Health Checks, if enabled the HTTP Content Health Check will be sent to any port except HTTPS (443) if properly configured." ::= { serverloadbalance 88 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1872.2.1.5.1 | slbRealServerMaxSize | 1 | 1 | The maximum number of entries in SLB RealServerTable. |
1.3.6.1.4.1.1872.2.1.5.2 | slbCurCfgRealServerTable | 1 | 18 | The table of real Servers. |
1.3.6.1.4.1.1872.2.1.5.3 | slbNewCfgRealServerTable | 1 | 21 | The table of real Servers. |
1.3.6.1.4.1.1872.2.1.5.4 | slbVirtServerTableMaxSize | 1 | 1 | The maximum number of entries in SLB VirtServerTable. |
1.3.6.1.4.1.1872.2.1.5.5 | slbCurCfgVirtServerTable | 1 | 16 | The table of virtual Servers. |
1.3.6.1.4.1.1872.2.1.5.6 | slbNewCfgVirtServerTable | 1 | 17 | The table of virtual Servers. |
1.3.6.1.4.1.1872.2.1.5.7 | slbCurCfgVirtServicesTable | 1 | 20 | The table of virtual Services. |
1.3.6.1.4.1.1872.2.1.5.8 | slbNewCfgVirtServicesTable | 1 | 21 | The table of virtual Services. |
1.3.6.1.4.1.1872.2.1.5.9 | slbGroupTableMaxSize | 1 | 1 | The maximum number of entries in slbCurCfgGroupTable. |
1.3.6.1.4.1.1872.2.1.5.10 | slbCurCfgGroupTable | 1 | 11 | The table of groups |
1.3.6.1.4.1.1872.2.1.5.11 | slbNewCfgGroupTable | 1 | 14 | The table of groups |
1.3.6.1.4.1.1872.2.1.5.12 | slbCurCfgPortTable | 1 | 10 | The table of ports and their SLB states |
1.3.6.1.4.1.1872.2.1.5.13 | slbNewCfgPortTable | 1 | 11 | The table of ports and their SLB states |
1.3.6.1.4.1.1872.2.1.5.14 | slbCurCfgImask | 1 | 1 | The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu. |
1.3.6.1.4.1.1872.2.1.5.15 | slbNewCfgImask | 1 | 1 | The virtual and real IP address mask - corresponding to the imask command of the slb configuration menu. |
1.3.6.1.4.1.1872.2.1.5.16 | slbfailover | 2 | 16 | None |
1.3.6.1.4.1.1872.2.1.5.17 | slbCurCfgGlobalControl | 1 | 1 | The global state of Server Load Balancing. |
1.3.6.1.4.1.1872.2.1.5.18 | slbNewCfgGlobalControl | 1 | 1 | The global state of Server Load Balancing. |
1.3.6.1.4.1.1872.2.1.5.19 | slbCurCfgMnet | 1 | 1 | The management network - corresponding to the mnet command of the slb configuration menu. |
1.3.6.1.4.1.1872.2.1.5.20 | slbNewCfgMnet | 1 | 1 | The management network - corresponding to the mnet command of the slb configuration menu. |
1.3.6.1.4.1.1872.2.1.5.21 | slbCurCfgMmask | 1 | 1 | The management subnet mask - corresponding to the mmask command of the slb configuration menu. |
1.3.6.1.4.1.1872.2.1.5.22 | slbNewCfgMmask | 1 | 1 | The management subnet mask - corresponding to the mmask command of the slb configuration menu. |
1.3.6.1.4.1.1872.2.1.5.23 | slbCurCfgRadiusAuthenString | 1 | 1 | The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check. |
1.3.6.1.4.1.1872.2.1.5.24 | slbNewCfgRadiusAuthenString | 1 | 1 | The RADIUS authentication string. The string is used for generating encrypted authentication string for RADIUS health check. |
1.3.6.1.4.1.1872.2.1.5.25 | slbCurCfgDirectMode | 1 | 1 | Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers wh… |
1.3.6.1.4.1.1872.2.1.5.26 | slbNewCfgDirectMode | 1 | 1 | Enable or disable direct access mode. It allows direct access to real servers and any combination of virtual and real servers wh… |
1.3.6.1.4.1.1872.2.1.5.27 | slbUrl | 3 | 65 | None |
1.3.6.1.4.1.1872.2.1.5.28 | slbCurCfgPmask | 1 | 1 | The persistent mask - corresponding to the pmask command of the slb configuration menu. |
1.3.6.1.4.1.1872.2.1.5.29 | slbNewCfgPmask | 1 | 1 | The persistent mask - corresponding to the pmask command of the slb configuration menu. |
1.3.6.1.4.1.1872.2.1.5.30 | slbCurCfgGrace | 1 | 1 | Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1). |
1.3.6.1.4.1.1872.2.1.5.31 | slbNewCfgGrace | 1 | 1 | Enable or disable graceful server failure. It allows to keep the connection to the failure real servers when set to enabled(1). |
1.3.6.1.4.1.1872.2.1.5.32 | slbCurCfgPeerTable | 1 | 4 | The table of Synch Peer Switch configuration in the current_config. |
1.3.6.1.4.1.1872.2.1.5.33 | slbNewCfgPeerTable | 1 | 5 | The table of Synch Peer Switch configuration in the new_config. |
1.3.6.1.4.1.1872.2.1.5.34 | slbCurCfgSyncFilt | 1 | 1 | Enable or disable synch filter configuration. |
1.3.6.1.4.1.1872.2.1.5.35 | slbNewCfgSyncFilt | 1 | 1 | Enable or disable synch filter configuration. |
1.3.6.1.4.1.1872.2.1.5.36 | slbCurCfgSyncPort | 1 | 1 | Enable or disable synch port configuration. |
1.3.6.1.4.1.1872.2.1.5.37 | slbNewCfgSyncPort | 1 | 1 | Enable or disable synch port configuration. |
1.3.6.1.4.1.1872.2.1.5.38 | slbCurCfgSyncVrrp | 1 | 1 | Enable or disable synch VRRP Priorities. |
1.3.6.1.4.1.1872.2.1.5.39 | slbNewCfgSyncVrrp | 1 | 1 | Enable or disable synch VRRP Priorities. |
1.3.6.1.4.1.1872.2.1.5.40 | slbCurCfgSyncPip | 1 | 1 | Enable or disable synch proxy IP addresses. |
1.3.6.1.4.1.1872.2.1.5.41 | slbNewCfgSyncPip | 1 | 1 | Enable or disable synch proxy IP addresses. |
1.3.6.1.4.1.1872.2.1.5.42 | slbCurCfgVirtMatrixArch | 1 | 1 | Enable or disable Virtual Matrix Architecture. |
1.3.6.1.4.1.1872.2.1.5.43 | slbNewCfgVirtMatrixArch | 1 | 1 | Enable or disable Virtual Matrix Architecture. |
1.3.6.1.4.1.1872.2.1.5.44 | slbCurCfgSyncSfo | 1 | 1 | Enable or disable synch stateful failover. |
1.3.6.1.4.1.1872.2.1.5.45 | slbNewCfgSyncSfo | 1 | 1 | Enable or disable synch stateful failover. |
1.3.6.1.4.1.1872.2.1.5.46 | slbCurCfgSyncSfoUpdatePeriod | 1 | 1 | The stateful failover update period in seconds. |
1.3.6.1.4.1.1872.2.1.5.47 | slbNewCfgSyncSfoUpdatePeriod | 1 | 1 | The stateful failover update period in seconds. |
1.3.6.1.4.1.1872.2.1.5.48 | slbCurCfgRealServPortTable | 1 | 4 | The table of real server service ports. |
1.3.6.1.4.1.1872.2.1.5.49 | slbNewCfgRealServPortTable | 1 | 5 | The table of real server service ports. |
1.3.6.1.4.1.1872.2.1.5.50 | slbCurCfgUrlBwmTable | 1 | 5 | The table of URL based BWM for Virtual Services. |
1.3.6.1.4.1.1872.2.1.5.51 | slbNewCfgUrlBwmTable | 1 | 6 | The table of URL based BWM for Virtual Services. |
1.3.6.1.4.1.1872.2.1.5.52 | slbRurl | 4 | 18 | None |
1.3.6.1.4.1.1872.2.1.5.53 | slbRealServPortTableMaxSize | 1 | 1 | The maximum number of entries in SLB RealServPortTable. |
1.3.6.1.4.1.1872.2.1.5.54 | slbPortTableMaxSize | 1 | 1 | The maximum number of entries in SLB Port Table. |
1.3.6.1.4.1.1872.2.1.5.55 | slbVirtServicesTableMaxSize | 1 | 1 | The maximum number of entries in SLB Virtual Services Table. |
1.3.6.1.4.1.1872.2.1.5.56 | slbUrlBwmTableMaxSize | 1 | 1 | The maximum number of entries in SLB URL BWM Table. |
1.3.6.1.4.1.1872.2.1.5.57 | slbPeerTableMaxSize | 1 | 1 | The maximum number of entries in SLB Peer Table. |
1.3.6.1.4.1.1872.2.1.5.58 | slbCurCfgFastage, slbWaphc | 10 | 20 | Session table fast-age (1 sec) period bit shift. |
1.3.6.1.4.1.1872.2.1.5.59 | slbNewCfgFastage, slbWap | 4 | 8 | Session table fast-age (1 sec) period bit shift. |
1.3.6.1.4.1.1872.2.1.5.60 | slbCurCfgSlowage, slbCurCfgFastage | 1 | 1 | Session table fast-age (1 sec) period bit shift. |
1.3.6.1.4.1.1872.2.1.5.61 | slbNewCfgSlowage, slbNewCfgFastage | 1 | 1 | Session table fast-age (1 sec) period bit shift. |
1.3.6.1.4.1.1872.2.1.5.62 | slbWaphc, slbCurCfgSlowage | 11 | 11 | Session table slow-age (2 min) period bit shift. |
1.3.6.1.4.1.1872.2.1.5.63 | slbWap, slbNewCfgSlowage | 5 | 5 | Session table slow-age (2 min) period bit shift. |
1.3.6.1.4.1.1872.2.1.5.64 | slbCurCfgSyncBwm | 1 | 1 | Enable or disable syncing BWM configuration. |
1.3.6.1.4.1.1872.2.1.5.65 | slbNewCfgSyncBwm | 1 | 1 | Enable or disable syncing BWM configuration. |
1.3.6.1.4.1.1872.2.1.5.66 | slbCurCfgTpcp | 1 | 1 | Enable or disable Transparent Proxy Cache Protocol. |
1.3.6.1.4.1.1872.2.1.5.67 | slbNewCfgTpcp | 1 | 1 | Enable or disable Transparent Proxy Cache Protocol. |
1.3.6.1.4.1.1872.2.1.5.68 | slbCurCfgMetricInterval | 1 | 1 | The interval of response and bandwidth metric updates. |
1.3.6.1.4.1.1872.2.1.5.69 | slbNewCfgMetricInterval | 1 | 1 | The interval of response and bandwidth metric updates. |
1.3.6.1.4.1.1872.2.1.5.70 | slbCurCfgRealGroupIdslb | 1 | 1 | The real server group number for IDSLB. |
1.3.6.1.4.1.1872.2.1.5.71 | slbNewCfgRealGroupIdslb | 1 | 1 | The real server group number for IDSLB. |
1.3.6.1.4.1.1872.2.1.5.72 | slbCurCfgLdapVersion | 0 | 0 | The version number for LDAP. |
1.3.6.1.4.1.1872.2.1.5.73 | slbNewCfgLdapVersion | 0 | 0 | The Version number of LDAP. |
1.3.6.1.4.1.1872.2.1.5.74 | slbCurCfgIsdInterval | 0 | 0 | The interval of ISD health checks. |
1.3.6.1.4.1.1872.2.1.5.75 | slbNewCfgIsdInterval | 0 | 0 | The interval of ISD health checks. |
1.3.6.1.4.1.1872.2.1.5.76 | slbCurCfgIsdRetry | 0 | 0 | The number of failed attemps to declare ISD down. |
1.3.6.1.4.1.1872.2.1.5.77 | slbNewCfgIsdRetry | 0 | 0 | The number of failed attemps to declare ISD down. |
1.3.6.1.4.1.1872.2.1.5.78 | slbCurCfgIsdRestr | 0 | 0 | The number of successful attemps to declare ISD up. |
1.3.6.1.4.1.1872.2.1.5.79 | slbNewCfgIsdRestr | 0 | 0 | The number of successful attemps to declare ISD up. |
1.3.6.1.4.1.1872.2.1.5.80 | slbCurCfgIsdNumber | 0 | 0 | The number of real servers used for ISDs. |
1.3.6.1.4.1.1872.2.1.5.81 | slbNewCfgIsdNumber | 0 | 0 | The number of real servers used for ISDs. |
1.3.6.1.4.1.1872.2.1.5.82 | synAttackDetCfg | 4 | 4 | None |
1.3.6.1.4.1.1872.2.1.5.83 | slbCurCfgTcpTimeWindow | 0 | 0 | The time window for TCP rate limiting. |
1.3.6.1.4.1.1872.2.1.5.84 | slbNewCfgTcpTimeWindow | 0 | 0 | The time window for TCP rate limiting. |
1.3.6.1.4.1.1872.2.1.5.85 | slbCurCfgTcpHoldDuration | 0 | 0 | The hold down duration for TCP rate limiting. |
1.3.6.1.4.1.1872.2.1.5.86 | slbNewCfgTcpHoldDuration | 0 | 0 | The hold down duration for TCP rate limiting. |
1.3.6.1.4.1.1872.2.1.5.87 | slbCurCfgAllowHttpHc | 0 | 0 | Enable or disable allow HTTP health check on any port. If disabled the non-HTTP virtual services will use TCP Health Checks, if e… |