Vendor: Extreme Networks
Module: EXTREME-SYSTEM-MIB
[Automatically extracted from oidview.com]
extremeSystemCommon OBJECT IDENTIFIER ::= { extremeSystem 1 }
extremeSystemCommon OBJECT IDENTIFIER ::= { extremeSystem 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1916.1.1.1.3 | extremeSaveConfiguration | 1 | 1 | When this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistan… |
| 1.3.6.1.4.1.1916.1.1.1.4 | extremeSaveStatus | 1 | 1 | This object will return the status of a save operation invoked by setting the extremeSaveConfiguration object. A network managem… |
| 1.3.6.1.4.1.1916.1.1.1.5 | extremeCurrentConfigInUse | 1 | 1 | Shows which NVRAM configuration store was used at last boot |
| 1.3.6.1.4.1.1916.1.1.1.6 | extremeConfigToUseOnReboot | 1 | 1 | Controls which NVRAM configuration store will be used on next reboot. |
| 1.3.6.1.4.1.1916.1.1.1.7 | extremeOverTemperatureAlarm | 1 | 1 | Alarm status of overtemperature sensor in device enclosure. |
| 1.3.6.1.4.1.1916.1.1.1.8 | extremeCurrentTemperature | 1 | 1 | Current temperature in degrees celcius measured inside device enclosure. |
| 1.3.6.1.4.1.1916.1.1.1.9 | extremeFanStatusTable | 1 | 5 | Table of operational status of all internal cooling fans. |
| 1.3.6.1.4.1.1916.1.1.1.10 | extremePrimaryPowerOperational | 1 | 1 | Operational status of internal power supply of a device. |
| 1.3.6.1.4.1.1916.1.1.1.11 | extremeRedundantPowerStatus | 1 | 1 | Operational status of an external redundant power supply to a device. |
| 1.3.6.1.4.1.1916.1.1.1.12 | extremeRedundantPowerAlarm | 1 | 1 | Alarm state of an external redundant power supply to a device. Alarm state indicates either fan failure or overtemperature condit… |
| 1.3.6.1.4.1.1916.1.1.1.13 | extremePrimarySoftwareRev | 1 | 1 | The software revision of the primary image stored in this device. This string will have a zero length if the revision is unknown… |
| 1.3.6.1.4.1.1916.1.1.1.14 | extremeSecondarySoftwareRev | 1 | 1 | The software revision of the secondary image stored in this device. This string will have a zero length if the revision is unkno… |
| 1.3.6.1.4.1.1916.1.1.1.15 | extremeImageToUseOnReboot | 1 | 1 | Controls which image will be used on next reboot. |
| 1.3.6.1.4.1.1916.1.1.1.16 | extremeSystemID | 1 | 1 | This represents the System ID of the Summit Switch. |
| 1.3.6.1.4.1.1916.1.1.1.17 | extremeSystemBoardID | 1 | 1 | This represents the Board ID of the Summit Switch. |
| 1.3.6.1.4.1.1916.1.1.1.18 | extremeSystemLeftBoardID | 1 | 1 | This represents the Left Board ID of the Summit Switch. |
| 1.3.6.1.4.1.1916.1.1.1.19 | extremeSystemRightBoardID | 1 | 1 | This represents the Right Board ID of the Summit Switch. |
| 1.3.6.1.4.1.1916.1.1.1.20 | extremeInputPowerVoltage | 1 | 1 | The input power voltage at which the system is currently operating. |
| 1.3.6.1.4.1.1916.1.1.1.21 | extremePowerStatus | 1 | 1 | Operational status of the power supply to a device. |
| 1.3.6.1.4.1.1916.1.1.1.22 | extremePowerAlarm | 1 | 1 | Alarm state of the power supply to a device. Alarm state indicates either fan failure or overtemperature condition. |
| 1.3.6.1.4.1.1916.1.1.1.23 | extremeRmonEnable | 1 | 1 | Setting this to true will cause the agent to start collecting RMON statistics. |
| 1.3.6.1.4.1.1916.1.1.1.24 | extremeCpuTaskTable | 1 | 8 | Table of CPU tasks that are active. |
| 1.3.6.1.4.1.1916.1.1.1.25 | extremeBootROMVersion | 1 | 1 | The software revision of the bootrom on the device. This string will have a zero length if the revision is unknown or invalid. |
| 1.3.6.1.4.1.1916.1.1.1.26 | extremeDot1dTpFdbTableEnable | 1 | 1 | Setting this to true will cause GetNext operations on the dot1dTpFdbTable to be allowed. Note that Get operations are… |
| 1.3.6.1.4.1.1916.1.1.1.27 | extremePowerSupplyTable | 1 | 13 | Table of status of all power supplies in the system. |
| 1.3.6.1.4.1.1916.1.1.1.28 | extremeCpuAggregateUtilization | 1 | 1 | The aggregate CPU utilization since the time the start started executing. |
| 1.3.6.1.4.1.1916.1.1.1.29 | extremeCpuTask2Table | 1 | 8 | Table of CPU tasks that are active. |
| 1.3.6.1.4.1.1916.1.1.1.30 | extremeAuthFailSrcAddr | 1 | 1 | The IP address of the originator of the bad SNMP request that caused the generation of an authentication failure trap. |
| 1.3.6.1.4.1.1916.1.1.1.31 | extremeCpuTransmitPriority | 1 | 1 | The CPU transmit priority. |
| 1.3.6.1.4.1.1916.1.1.1.32 | extremeImageBooted | 1 | 1 | The image with which the switch was last booted, using which it is currently running. |
| 1.3.6.1.4.1.1916.1.1.1.33 | extremeMsmFailoverCause | 1 | 1 | The cause of the last MSM failover. never(1) means an MSM Failover has not occurred since the last reboot. admin(2) means the fai… |
| 1.3.6.1.4.1.1916.1.1.1.34 | extremeImageTable | 1 | 13 | A table containing information about each software image. |
| 1.3.6.1.4.1.1916.1.1.1.35 | extremeImageFeatureTable | 1 | 4 | A table containing information about the software features. |
| 1.3.6.1.4.1.1916.1.1.1.36 | extremeSystemPowerState | 1 | 1 | The current state of power available. |
| 1.3.6.1.4.1.1916.1.1.1.37 | extremeBootTime | 1 | 1 | The boot time expressed in standard time_t value. When interpreted as an absolute time value, it represents the number of seconds… |
| 1.3.6.1.4.1.1916.1.1.1.38 | extremePowerSupplyOutputPowerTable | 1 | 5 | extremePowerSupplyOutputPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremePowerSupplyOutputPowerEntry MAX-ACCESS not-accessible … |
| 1.3.6.1.4.1.1916.1.1.1.39 | extremePowerSupplyUsageTable | 1 | 3 | extremePowerSupplyUsageTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremePowerSupplyUsageEntry MAX-ACCESS not-accessible STATUS curre… |
| 1.3.6.1.4.1.1916.1.1.1.40 | extremeSystemPowerUsage | 2 | 2 | None |
| 1.3.6.1.4.1.1916.1.1.1.41 | extremeSystemPowerMonitorTable | 1 | 4 | extremeSystemPowerMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeSystemPowerMonitorEntry MAX-ACCESS not-accessible STATUS c… |
| 1.3.6.1.4.1.1916.1.1.1.42 | extremeRebootTable | 1 | 15 | extremeRebootTable OBJECT-TYPE SYNTAX SEQUENCE OF RebootTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This gr… |
| 1.3.6.1.4.1.1916.1.1.1.43 | extremeDownloadImageTable | 1 | 12 | extremeDownloadImageTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeDownloadImageEntry MAX-ACCESS not-accessible STATUS current DES… |
| 1.3.6.1.4.1.1916.1.1.1.44 | extremeInstallImageTable | 1 | 9 | extremeInstallImageTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeInstallImageEntry MAX-ACCESS not-accessible STATUS current DESCR… |
| 1.3.6.1.4.1.1916.1.1.1.45 | extremeLoadInstallTrap | 2 | 6 | None |
| 1.3.6.1.4.1.1916.1.1.1.48 | extremeSaveConfigurationFileName | 0 | 0 | extremeSaveConfigurationFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPT… |
| 1.3.6.1.4.1.1916.1.1.1.49 | extremeUseOnRebootFileName | 0 | 0 | extremeUseOnRebootFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION " … |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1916.1.1.2 | extremeChassisGroup | 3 | 12 | None |
| 1.3.6.1.4.1.1916.1.1.3 | extremeSystemHealthCheck, extremeOpaqueTypes | 3 | 6 | None |
| 1.3.6.1.4.1.1916.1.1.4 | extremeSystemThresholds | 2 | 4 | None |
| 1.3.6.1.4.1.1916.1.1.6 | extremeSystemNotifications | 1 | 5 | None |
| 1.3.6.1.4.1.1916.1.1.7 | extremeGenericTrapParams | 3 | 3 | None |