This indicates the action taken by the domain when the
fail timer expires.
If the action is to sendAlert, then a SNMP trap -
extremeEapsFailTimerExpFlagSet - will be sent, and the
secondary port will continue to remain in blocking state.
If the action is to openSecondaryPort, then the secondary
port will open and be set to forwarding state.
Parsed from file v73e2b4.mib.txt
Company: extreme
Module: EXTREME-EAPS-MIB
Vendor: Extreme Networks
Module: EXTREME-EAPS-MIB (ExtremeXOS_12.0.2.25_MIB-13)
Type: TABULAR
Access: read-create
Syntax: EapsFailTimerExpiryAction
Automatically extracted from www.mibdepot.com
extremeEapsFailedTimerExpiryAction OBJECT-TYPE SYNTAX EapsFailTimerExpiryAction MAX-ACCESS read-create STATUS current DESCRIPTION "This indicates the action taken by the domain when the fail timer expires. If the action is to sendAlert, then a SNMP trap - extremeEapsFailTimerExpFlagSet - will be sent, and the secondary port will continue to remain in blocking state. If the action is to openSecondaryPort, then the secondary port will open and be set to forwarding state." ::= { extremeEapsEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1916.1.18.1.1.1 | extremeEapsName | 0 | 0 | The EAPS domain name. |
| 1.3.6.1.4.1.1916.1.18.1.1.2 | extremeEapsMode | 0 | 0 | This indicates the mode of the EAPS domain. |
| 1.3.6.1.4.1.1916.1.18.1.1.3 | extremeEapsState | 0 | 0 | This indicates the current EAPS state of this EAPS domain. |
| 1.3.6.1.4.1.1916.1.18.1.1.4 | extremeEapsFailedFlag | 0 | 0 | This indicates the status of the failed flag. If the failed timer expires while its expiry action is configured to sendAlert, thi… |
| 1.3.6.1.4.1.1916.1.18.1.1.5 | extremeEapsEnabled | 0 | 0 | This indicated if this domain has been enabled or not. |
| 1.3.6.1.4.1.1916.1.18.1.1.6 | extremeEapsPrimaryPort | 0 | 0 | This indicates the EAPS domain's primary ring-port. Value of 0 indicates the primary port is still not configured |
| 1.3.6.1.4.1.1916.1.18.1.1.7 | extremeEapsSecondaryPort | 0 | 0 | This indicates the EAPS domain's secondary ring-port. Value of 0 indicates the secondary port is still not configured |
| 1.3.6.1.4.1.1916.1.18.1.1.8 | extremeEapsHelloTimer | 0 | 0 | This indicates the EAPS domain's hello timer's value in seconds. |
| 1.3.6.1.4.1.1916.1.18.1.1.9 | extremeEapsFailedTimer | 0 | 0 | This indicates the EAPS domain's failed timer's value in seconds. |
| 1.3.6.1.4.1.1916.1.18.1.1.11 | extremeEapsUnconfigRingPort | 0 | 0 | This specifies which EAPS domain port is being unconfigured. Value of 1, indicates unconfigure the primary port. Value of 2, indic… |
| 1.3.6.1.4.1.1916.1.18.1.1.12 | extremeEapsPrimaryStatus | 0 | 0 | This indicates the status of the EAPS domain's primary ring-port. |
| 1.3.6.1.4.1.1916.1.18.1.1.13 | extremeEapsSecondaryStatus | 0 | 0 | This indicates the status of the EAPS domain's secondary ring-port. |
| 1.3.6.1.4.1.1916.1.18.1.1.14 | extremeEapsProtectedVlansCount | 0 | 0 | This gives the count of the number of vlans that are being protected by this EAPS domain. |
| 1.3.6.1.4.1.1916.1.18.1.1.15 | extremeEapsRowStatus | 0 | 0 | The status of this entry as per standard RowStatus conventions. |
| 1.3.6.1.4.1.1916.1.18.1.1.16 | extremeEapsHelloTimerMs | 0 | 0 | This indicates the milliseconds portion of the EAPS domain's hello timer value in milliseconds. |
| 1.3.6.1.4.1.1916.1.18.1.1.17 | extremeEapsPriority | 0 | 0 | extremeEapsPriority OBJECT-TYPE SYNTAX EapsDomainPriority MAX-ACCESS read-create STATUS current DESCRIPTION "This gives the pri… |