Reference record for OID 1.3.6.1.4.1.1958.1.1.8.2.3

parent: 1.3.6.1.4.1.1958.1.1.8.2 (rc3Network)
node code: 3
node name: rc3PacketHandlingOptions
dot oid: 1.3.6.1.4.1.1958.1.1.8.2.3
type: OBJECT-TYPE
asn1 oid: {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) redCreek(1958) products(1) rcRavlin(1) rcMgmt(8) rc3Network(2) rc3PacketHandlingOptions(3)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) redCreek(1958) products(1) rcRavlin(1) rcMgmt(8) rc3Network(2) rc3PacketHandlingOptions(3)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) redCreek(1958) products(1) rcRavlin(1) rcMgmt(8) rc3Network(2) rc3PacketHandlingOptions(3)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) redCreek(1958) products(1) rcRavlin(1) rcMgmt(8) rc3Network(2) rc3PacketHandlingOptions(3)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) redCreek(1958) products(1) rcRavlin(1) rcMgmt(8) rc3Network(2) rc3PacketHandlingOptions(3)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) redCreek(1958) products(1) rcRavlin(1) rcMgmt(8) rc3Network(2) rc3PacketHandlingOptions(3)}
iri oid: /iso/identified-organization/dod/internet/private/enterprise/redCreek/products/rcRavlin/rcMgmt/rc3Network/rc3PacketHandlingOptions

/iso/identified-organization/dod/internet/private/enterprises/redCreek/products/rcRavlin/rcMgmt/rc3Network/rc3PacketHandlingOptions

/iso/org/dod/internet/private/enterprise/redCreek/products/rcRavlin/rcMgmt/rc3Network/rc3PacketHandlingOptions

/iso/org/dod/internet/private/enterprises/redCreek/products/rcRavlin/rcMgmt/rc3Network/rc3PacketHandlingOptions

/iso/iso-identified-organization/dod/internet/private/enterprise/redCreek/products/rcRavlin/rcMgmt/rc3Network/rc3PacketHandlingOptions

/iso/iso-identified-organization/dod/internet/private/enterprises/redCreek/products/rcRavlin/rcMgmt/rc3Network/rc3PacketHandlingOptions
iri by oid_info: /ISO/Identified-Organization/6/1/4/1/1958/1/1/8/2/3

Description by mibdepot

This is Bit Masked Object. Zero or more bits can be set or cleared.
Bit 0 - Forward non-IP Traffic in Bridge Mode
Bit 1 - Forward Local IP Traffic in Bridge Mode
Bit 2 - Forward MAC Broadcast in Bridge Mode
Bit 3 - Forward IP Broadcast in Router Mode
Bit 4 - Send ICMP Re-Direct Messages in Router Mode
Bit 5 - Forward Multicast
Bit 6 - ARP proxy on the Remote Port
Bit 7 - Ignore Don't frag bit. Default is disable. In default mode, if
- the Don't frag bit is set, and packets needs to be fragmented
- then Ravlin will send ICMP back to the sender and drop the packet.
Bit 8 - NAT packets matching bypass selector list.

Bit 9 - SNMP access on Remote port in clear. Default is enabled. If
disabled then the ONLY way to access the device from the Remote
side is to manage it via a tunnel.
Note - 0 Allow SNMP on remote in the clear.
- 1 Allow SNMP on remote thru. the tunnel.

Bit 10 - Enable/Disable PPPoE on Remote Port - Default is disable.
Note - 1 Enable
- 0 Disable

Bit 11 - Enable/Disable PPPoE connect on Demand - Default is disable.
Note - 1 Enable
- 0 Disable

Bit 29 - Enable/Disable listening to unsolicited ARP on local port.
Default is disable.
Note - 1 Enable
- 0 Disable

Bit 30 - Enable/Disable cascading packets from one gateway to another.
Default is disable.
Note - 1 Enable
- 0 Disable

The flags specifying behavior for bridge mode are ignored
when the device is in router mode, and the flags specifying
behavior for router mode are ignored when the device is in
bridge mode.

Parsed from file Ravlin.mib.txt
Company: None
Module: RCV3

Description by circitor

Information by oid_info

Vendor: Red Creek Communications, Inc.
Module: RCV3

[Automatically extracted from oidview.com]

Information by mibdepot

rc3PacketHandlingOptions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is Bit Masked Object. Zero or more bits can be set or cleared. Bit 0 - Forward non-IP Traffic in Bridge Mode Bit 1 - Forward Local IP Traffic in Bridge Mode Bit 2 - Forward MAC Broadcast in Bridge Mode Bit 3 - Forward IP Broadcast in Router Mode Bit 4 - Send ICMP Re-Direct Messages in Router Mode Bit 5 - Forward Multicast Bit 6 - ARP proxy on the Remote Port Bit 7 - Ignore Don't frag bit. Default is disable. In default mode, if - the Don't frag bit is set, and packets needs to be fragmented - then Ravlin will send ICMP back to the sender and drop the packet. Bit 8 - NAT packets matching bypass selector list. Bit 9 - SNMP access on Remote port in clear. Default is enabled. If disabled then the ONLY way to access the device from the Remote side is to manage it via a tunnel. Note - 0 Allow SNMP on remote in the clear. - 1 Allow SNMP on remote thru. the tunnel. Bit 10 - Enable/Disable PPPoE on Remote Port - Default is disable. Note - 1 Enable - 0 Disable Bit 11 - Enable/Disable PPPoE connect on Demand - Default is disable. Note - 1 Enable - 0 Disable Bit 29 - Enable/Disable listening to unsolicited ARP on local port. Default is disable. Note - 1 Enable - 0 Disable Bit 30 - Enable/Disable cascading packets from one gateway to another. Default is disable. Note - 1 Enable - 0 Disable The flags specifying behavior for bridge mode are ignored when the device is in router mode, and the flags specifying behavior for router mode are ignored when the device is in bridge mode." ::= { rc3Network 3 }

Information by circitor

First Registration Authority (recovered by parent 1.3.6.1.4.1.1958)

Kamath Ramesh

Children (1)

OID	Name	Sub children	Sub Nodes Total	Description
1.3.6.1.4.1.1958.1.1.8.2.3.0	rc3PacketHandlingOptions	0	0	None

Brothers (10)

OID	Name	Sub children	Sub Nodes Total	Description
1.3.6.1.4.1.1958.1.1.8.2.1	rc3InterfaceTable	1	4	Interface table, for the Ravlin unit. This is a fixed sized table. The size of the table is determined by the value of ifNumber.…
1.3.6.1.4.1.1958.1.1.8.2.2	rc3IpRouteTable	1	9	The routing table for this Ravlin.
1.3.6.1.4.1.1958.1.1.8.2.4	rc3PPPoEUserName	1	1	User name
1.3.6.1.4.1.1958.1.1.8.2.5	rc3PPPoEUserPassword	1	1	User Password. Password will be encrypted by RNM when doing a set. Get for user password
1.3.6.1.4.1.1958.1.1.8.2.6	rc3PPPoEServiceName	1	1	Service Name.
1.3.6.1.4.1.1958.1.1.8.2.7	rc3PPPoEConcentratorName	1	1	PPPoE Concentrator Name.
1.3.6.1.4.1.1958.1.1.8.2.8	rc3PPPoEIdleTimeout	1	1	The duration in minutes to timeout PPPoE connection when there is no traffic.Default is 10 minutes.
1.3.6.1.4.1.1958.1.1.8.2.9	rc3PPPoERetryCount	1	1	Retry count for PPPoE. Default is 10.
1.3.6.1.4.1.1958.1.1.8.2.10	rc3PPPoEDnsServer1	1	1	IP address of DNS server1. When Ravlin is enabled to get its remote interface attributes via PPPoE, it will also provide DNS ser…
1.3.6.1.4.1.1958.1.1.8.2.11	rc3PPPoEDnsServer2	1	1	IP address of DNS server1. When Ravlin is enabled to get its remote interface attributes via PPPoE, it will also provide DNS ser…