An entry containing information applicable to a particular ALC line.
Parsed from file alc.mib.txt
Company: None
Module: ALC-MIB
An entry containing information applicable to a particular ALC line.
Parsed from file ALC-MIB.mib
Module: ALC-MIB
Vendor: SITA ADS
Module: ALC-MIB
[Automatically extracted from oidview.com]
alcCuEntry OBJECT-TYPE SYNTAX AlcCuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry containing information applicable to a particular ALC line." INDEX { alcCuIfIndex, alcCuIA } ::= { alcCuTable 1 }
alcCuEntry OBJECT-TYPE SYNTAX AlcCuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry containing information applicable to a particular ALC line." INDEX { alcCuIfIndex, alcCuIA } ::= { alcCuTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1978.2.10.1.3.1.1 | alcCuIfIndex | 0 | 0 | The line interface identifier that can be used to locate this IA. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.2 | alcCuDescr | 0 | 0 | Name of this control unit. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.3 | alcCuIA | 0 | 0 | this control units IA |
| 1.3.6.1.4.1.1978.2.10.1.3.1.4 | alcCuStatus | 0 | 0 | What is this control units current status. enabledUp: responding to polls, enabledDown: not responding to polls. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.5 | alcCuPollCmd | 0 | 0 | Mode Function Primary Should we be polling this CU? enabled - polling & forwarding data, disabled - not polling & not forwardin… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.6 | alcCuOutQueueMsgSize | 0 | 0 | (1..100 messages) default=xx Defines the size of the queue (in messages) that holds outgoing messages (Port bound). UNITS: messag… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.7 | alcCuOutQueueCharSize | 0 | 0 | (1..xx characters) default=xx Defines the size of the queue (in characters) that holds outgoing messages (Port bound). UNITS: cha… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.8 | alcCuN1MaxMsgSize | 0 | 0 | (1..xx characters) default=960 Maximum length of a single message. UNITS: characters |
| 1.3.6.1.4.1.1978.2.10.1.3.1.9 | alcCuT1PollRspTimer | 0 | 0 | Poll response timeout (default = 200 millisec) (PRIMARY) No response to a poll was received before this timeout. UNITS: milliseco… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.10 | alcCuT2MaxRxTimer | 0 | 0 | (1..65 seconds) default=5 (PRIMARY) Timeout to ensure that the received messages are not overlength. Typically started at: start… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.11 | alcCuT4NoPollTime | 0 | 0 | No polls received within this time. (default = 3000 millisecs) (SECONDARY) UNITS: milliseconds |
| 1.3.6.1.4.1.1978.2.10.1.3.1.12 | alcCuC1UpCounter | 0 | 0 | Number of answered DEAD polls to declare a CU up. (default=1) (PRIMARY only) Equivalent to the secondary variable: alcCuN3PollsTi… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.13 | alcCuC2DownCounter | 0 | 0 | Number of missed LIVE polls to declare a CU down. (default=3) (PRIMARY only) Equivalent to the secondary variable: alcN4PollsTill… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.14 | alcCuN2MaxMsgPerPoll | 0 | 0 | maximum number of messages which can be sent to the ACS per POLL. (SECONDARY - multidrop, default=10) UNITS: messages |
| 1.3.6.1.4.1.1978.2.10.1.3.1.15 | alcCuMaxCharPerPoll | 0 | 0 | maximum number of characters which can be sent to the ACS per POLL. (default=xx) (SECONDARY) UNITS: characters |
| 1.3.6.1.4.1.1978.2.10.1.3.1.16 | alcCuN3PollsTillAlive | 0 | 0 | number of consecutive POLL commands to declare the CU/circuit available. (SECONDARY) Equivalent to the primary variable: alcC1UpC… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.17 | alcCuN4PollsTillDead | 0 | 0 | number of consecutive polling time-outs to declare the CU unavailable. (SECONDARY) Equivalent to the primary variable: alcC2Down… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.18 | alcCuIAResetOption | 0 | 0 | IA reset message is sent when the IA comes alive. (PRIMARY) The message is sent to the polled IA. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.19 | alcCuIAValidationOption | 0 | 0 | IA Validation: possibly two CUs responding to the same address (PRIMARY) This flag is used with respect to the pollers point of … |
| 1.3.6.1.4.1.1978.2.10.1.3.1.20 | alcCuRxCCCOption | 0 | 0 | (PRIMARY) a) b) default is preconfigured IA Resend message ' c) user can enter their … |
| 1.3.6.1.4.1.1978.2.10.1.3.1.21 | alcCuMaxFrame | 0 | 0 | Number of messages allowed to be sent to a given CU before having to poll all the other CUs on the line (default: 0 = disabled) U… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.22 | alcCuSvcMsgHeader | 0 | 0 | The is is the header that is sent out whenever the protocol module determines the need to send a service message. This prefix i… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.23 | alcCuSvcMsgIndex | 0 | 0 | This provides the index into the service message table: 'svcmsgTable'. If this index is non-zero, the protocol (when it determin… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.24 | alcCuSvcMsgTrailer | 0 | 0 | This is the trailer sent whenever a service message is sent. It is in the native character set of the protocol. It is only used i… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.25 | alcCuStatusChanges | 0 | 0 | A count of the number of times: a) no response to a live poll was received (PRIMARY), b) CU had polling stopped due to T1 timeout… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.26 | alcCuRxFrames | 0 | 0 | A count of the number of frames received for this CU. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.27 | alcCuTxFrames | 0 | 0 | A count of the number of frames sent to this CU. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.28 | alcCuRxChars | 0 | 0 | A count of the number of characters received from the CU. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.29 | alcCuTxChars | 0 | 0 | A count of the number of characters sent to the CU. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.30 | alcCuStatusTrapControl | 0 | 0 | If enabled, it allows the system to generate alcCuState traps, when the CU's status (alcCuStatus) changes to enabled-up, and enab… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.31 | alcCuDropped | 0 | 0 | A count of the number of messages dropped due message sent which is not being acknowledged by the CU. |