false - No, the device does not have any excessive collision, FCS errors, alignment warning etc.
true - Yes, the device does have.
Parsed from file sn_agent.mib.txt
Company: None
Module: FOUNDRY-SN-AGENT-MIB
false - No, the device does not have any excessive collision, FCS errors, alignment warning etc.
true - Yes, the device does have.
Parsed from file FOUNDRY-SN-AGENT-MIB.mib
Module: FOUNDRY-SN-AGENT-MIB
Vendor: Foundry Networks, Inc.
Module: FOUNDRY-SN-AGENT-MIB
[Automatically extracted from oidview.com]
snAgGblExcessiveErrorWarning OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION "false - No, the device does not have any excessive collision, FCS errors, alignment warning etc. true - Yes, the device does have." ::= { snAgentGbl 34 }
snAgGblExcessiveErrorWarning OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION "false - No, the device does not have any excessive collision, FCS errors, alignment warning etc. true - Yes, the device does have." ::= { snAgentGbl 34 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1991.1.1.2.1.34.0 | snAgGblExcessiveErrorWarning | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1991.1.1.2.1.1 | snAgReload | 1 | 1 | Action object to reboot the agent. The following values can only be read: other(1).....agent in unknown or other state running(2).… |
1.3.6.1.4.1.1991.1.1.2.1.2 | snAgEraseNVRAM | 1 | 1 | Action object to erase NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad fl… |
1.3.6.1.4.1.1991.1.1.2.1.3 | snAgWriteNVRAM | 1 | 1 | Action object to save all configuration info to NVRAM of the agent. The following values can only be read: normal(1) error(2)... op… |
1.3.6.1.4.1.1991.1.1.2.1.4 | snAgConfigFromNVRAM | 1 | 1 | Action object to config the switch from NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation… |
1.3.6.1.4.1.1991.1.1.2.1.5 | snAgTftpServerIp | 1 | 1 | The tftp server address, this will be used for both download/upload image file and config file. |
1.3.6.1.4.1.1991.1.1.2.1.6 | snAgImgFname | 1 | 1 | Name of the image file including path currently associated with the system. When the object is not used, the value is a zero leng… |
1.3.6.1.4.1.1991.1.1.2.1.7 | snAgImgLoad | 1 | 1 | Action object to down/up load a new image to the agent. The following values: Error values: from normal(1) to operationError(17) … |
1.3.6.1.4.1.1991.1.1.2.1.8 | snAgCfgFname | 1 | 1 | Name of the config file(s) including path currently associated with the system. Some agents in special situations may support a v… |
1.3.6.1.4.1.1991.1.1.2.1.9 | snAgCfgLoad | 1 | 1 | Action object to down/up load a config image to the agent. The following values can be read : Error values: from normal(1) to oper… |
1.3.6.1.4.1.1991.1.1.2.1.10 | snAgDefGwayIp | 1 | 1 | The default gateway (router) address. |
1.3.6.1.4.1.1991.1.1.2.1.11 | snAgImgVer | 1 | 1 | The version of the running software in the form 'major.minor.maintenance[letters]'. |
1.3.6.1.4.1.1991.1.1.2.1.12 | snAgFlashImgVer | 1 | 1 | The version of the software image saved in local storage such as flash memory in the form 'major.minor.maintenance[letters]'. If … |
1.3.6.1.4.1.1991.1.1.2.1.13 | snAgGblIfIpAddr | 1 | 1 | The interface ip address. |
1.3.6.1.4.1.1991.1.1.2.1.14 | snAgGblIfIpMask | 1 | 1 | The interface ip address mask. |
1.3.6.1.4.1.1991.1.1.2.1.15 | snAgGblPassword | 1 | 1 | System Security Access Password and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero str… |
1.3.6.1.4.1.1991.1.1.2.1.16 | snAgTrpRcvrCurEntry | 1 | 1 | The current total entries of the Trap Receiver Table are created. |
1.3.6.1.4.1.1991.1.1.2.1.19 | snAgGblDataRetrieveMode | 1 | 1 | By default, this mode is set to nextbootCfg(0). The VLAN Table and Port-STP Table data will be retrieved according to this mode. n… |
1.3.6.1.4.1.1991.1.1.2.1.20 | snAgSystemLog | 1 | 1 | The system log object to indicate whether any Network Management Station(NMS) has login. The first byte of the octet string is t… |
1.3.6.1.4.1.1991.1.1.2.1.21 | snAgGblEnableColdStartTrap | 1 | 1 | Indicates whether the SNMP agent process is permitted to generate cold start traps. |
1.3.6.1.4.1.1991.1.1.2.1.22 | snAgGblEnableLinkUpTrap | 1 | 1 | Indicates whether the SNMP agent process is permitted to generate link up traps. |
1.3.6.1.4.1.1991.1.1.2.1.23 | snAgGblEnableLinkDownTrap | 1 | 1 | Indicates whether the SNMP agent process is permitted to generate link down traps. |
1.3.6.1.4.1.1991.1.1.2.1.24 | snAgGblPasswordChangeMode | 1 | 1 | Specify which management entity is allowed to change the password. 'anyMgmtEntity' management entities are SNMP management statio… |
1.3.6.1.4.1.1991.1.1.2.1.25 | snAgGblReadOnlyCommunity | 1 | 1 | SNMP read community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero length s… |
1.3.6.1.4.1.1991.1.1.2.1.26 | snAgGblReadWriteCommunity | 1 | 1 | SNMP read-write community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero le… |
1.3.6.1.4.1.1991.1.1.2.1.27 | snAgGblCurrentSecurityLevel | 1 | 1 | This represnts the current log-in security level. Each level of security requires a password to permit user for different system … |
1.3.6.1.4.1.1991.1.1.2.1.28 | snAgGblSecurityLevelSet | 1 | 1 | This shows which the security level password to be set. |
1.3.6.1.4.1.1991.1.1.2.1.29 | snAgGblLevelPasswordsMask | 1 | 1 | This shows the bitmap of level passwords which successfully assigned to the system. |
1.3.6.1.4.1.1991.1.1.2.1.30 | snAgGblQueueOverflow | 1 | 1 | false - The device queues are not overflow. true - The device queues are overflow. |
1.3.6.1.4.1.1991.1.1.2.1.31 | snAgGblBufferShortage | 1 | 1 | false - The device buffers are adequate. true - The device buffers are in shortage. |
1.3.6.1.4.1.1991.1.1.2.1.32 | snAgGblDmaFailure | 1 | 1 | false - The device DMAs are in good condition. true - One of the DMAs in the device fails. |
1.3.6.1.4.1.1991.1.1.2.1.33 | snAgGblResourceLowWarning | 1 | 1 | false - No, the device does not have resource-low-warning. true - Yes, the device does have resource-low-warning. |
1.3.6.1.4.1.1991.1.1.2.1.35 | snAgGblCpuUtilData | 1 | 1 | The statistics collection of utilization of the CPU in the device. |
1.3.6.1.4.1.1991.1.1.2.1.36 | snAgGblCpuUtilCollect | 1 | 1 | enable(1) - The beginning of statistics collection of utilization of the CPU in the device. disable(0) - The end of statistics … |
1.3.6.1.4.1.1991.1.1.2.1.37 | snAgGblTelnetTimeout | 1 | 1 | Telnet session idling timeout value. Writing value 0 to this object never timeouts any telnet sessions. Each value unit is one mi… |
1.3.6.1.4.1.1991.1.1.2.1.38 | snAgGblEnableWebMgmt | 1 | 1 | Enable/disable web management. |
1.3.6.1.4.1.1991.1.1.2.1.39 | snAgGblSecurityLevelBinding | 1 | 1 | This represnts the binding of a given password to which security level. A value of 255 indicates an invalid binding. |
1.3.6.1.4.1.1991.1.1.2.1.40 | snAgGblEnableSLB | 1 | 1 | Enable/disable Server Load Balancing. |
1.3.6.1.4.1.1991.1.1.2.1.41 | snAgSoftwareFeature | 1 | 1 | A bit string representing the software feature of the running switch/router image. These features were conditional compiled to di… |
1.3.6.1.4.1.1991.1.1.2.1.42 | snAgGblEnableModuleInsertedTrap | 1 | 1 | Indicates whether the SNMP agent process is permitted to generate hardware module inserted to chassis traps. |
1.3.6.1.4.1.1991.1.1.2.1.43 | snAgGblEnableModuleRemovedTrap | 1 | 1 | Indicates whether the SNMP agent process is permitted to generate hardware module removed from chassis traps. |
1.3.6.1.4.1.1991.1.1.2.1.44 | snAgGblTrapMessage | 1 | 1 | A generic trap message string. |
1.3.6.1.4.1.1991.1.1.2.1.45 | snAgGblEnableTelnetServer | 1 | 1 | Enable or disable telnet server in device. |
1.3.6.1.4.1.1991.1.1.2.1.46 | snAgGblTelnetPassword | 1 | 1 | Telnet Access Password and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero string. |
1.3.6.1.4.1.1991.1.1.2.1.47 | snAgBuildDate | 1 | 1 | The date of the built software. |
1.3.6.1.4.1.1991.1.1.2.1.48 | snAgBuildtime | 1 | 1 | The time of the built software. |
1.3.6.1.4.1.1991.1.1.2.1.49 | snAgBuildVer | 1 | 1 | The version of the built software in the form 'major.minor.maintenance[letters]'. |
1.3.6.1.4.1.1991.1.1.2.1.50 | snAgGblCpuUtil1SecAvg | 1 | 1 | The statistics collection of 1 second CPU utilization. |
1.3.6.1.4.1.1991.1.1.2.1.51 | snAgGblCpuUtil5SecAvg | 1 | 1 | The statistics collection of 5 second CPU utilization. |
1.3.6.1.4.1.1991.1.1.2.1.52 | snAgGblCpuUtil1MinAvg | 1 | 1 | The statistics collection of 1 minute CPU utilization. |
1.3.6.1.4.1.1991.1.1.2.1.53 | snAgGblDynMemUtil | 1 | 1 | The system dynamic memory utilization, in unit of percentage. |
1.3.6.1.4.1.1991.1.1.2.1.54 | snAgGblDynMemTotal | 1 | 1 | The total amount of system dynamic memory, in number of bytes. |
1.3.6.1.4.1.1991.1.1.2.1.55 | snAgGblDynMemFree | 1 | 1 | The free amount of system dynamic memory, in number of bytes. |
1.3.6.1.4.1.1991.1.1.2.1.56 | snAgImgLoadSPModuleType | 1 | 1 | The switch processor module type of which that receives the downloaded image. |
1.3.6.1.4.1.1991.1.1.2.1.57 | snAgImgLoadSPModuleNumber | 1 | 1 | The slot numner of a switch processor module that receives the downloaded image. Setting value 0 applies to all SP modules. |
1.3.6.1.4.1.1991.1.1.2.1.58 | snAgTrapHoldTime | 1 | 1 | The time in seconds for which traps will be witheld during system initialization. |
1.3.6.1.4.1.1991.1.1.2.1.59 | snAgSFlowSourceInterface | 1 | 1 | Use the ifIndex value here to specify the source interface to be used for sFlow packets. The interface should have IP address con… |
1.3.6.1.4.1.1991.1.1.2.1.60 | snAgGblTelnetLoginTimeout | 1 | 1 | Telnet session login timeout value in minutes. Default is 1 minute. |
1.3.6.1.4.1.1991.1.1.2.1.61 | snAgGblBannerExec | 1 | 1 | EXEC process creation banner. Insert newlines using '\n' within the string. |
1.3.6.1.4.1.1991.1.1.2.1.62 | snAgGblBannerIncoming | 1 | 1 | Incoming terminal line banner. Insert newlines using '\n' within the string. |
1.3.6.1.4.1.1991.1.1.2.1.63 | snAgGblBannerMotd | 1 | 1 | Message-of-the-day banner. Insert newlines using '\n' within the string. |
1.3.6.1.4.1.1991.1.1.2.1.64 | snAgWebMgmtServerTcpPort | 1 | 1 | The TCP port number of web management interface. |