If enabled(1), the backup management module copies the boot code
from the active management module to its boot code flash storage
after power up, and whenever the active management module's boot
code is updated. The backup management module does not copy if
both boot codes were identical.
Parsed from file sn_agent.mib.txt
Company: None
Module: FOUNDRY-SN-AGENT-MIB
If enabled(1), the backup management module copies the boot code
from the active management module to its boot code flash storage
after power up, and whenever the active management module's boot
code is updated. The backup management module does not copy if
both boot codes were identical.
Parsed from file FOUNDRY-SN-AGENT-MIB.mib
Module: FOUNDRY-SN-AGENT-MIB
Vendor: Foundry Networks, Inc.
Module: FOUNDRY-SN-AGENT-MIB
[Automatically extracted from oidview.com]
snAgentRedunBkupCopyBootCode OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "If enabled(1), the backup management module copies the boot code from the active management module to its boot code flash storage after power up, and whenever the active management module's boot code is updated. The backup management module does not copy if both boot codes were identical." DEFVAL { disabled } ::= { snAgentRedunGbl 3 }
snAgentRedunBkupCopyBootCode OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "If enabled(1), the backup management module copies the boot code from the active management module to its boot code flash storage after power up, and whenever the active management module's boot code is updated. The backup management module does not copy if both boot codes were identical." DEFVAL { disabled } ::= { snAgentRedunGbl 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1991.1.1.2.10.1.3.0 | snAgentRedunBkupCopyBootCode | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1991.1.1.2.10.1.1 | snAgentRedunActiveMgmtMod | 1 | 1 | Slot number of the active management module. Setting this object does not take effect immediately. Saving configuration data to f… |
1.3.6.1.4.1.1991.1.1.2.10.1.2 | snAgentRedunSyncConfig | 1 | 1 | Frequency of the backup management module copying the configuration data from the active management module. Each unit is 1 second… |
1.3.6.1.4.1.1991.1.1.2.10.1.4 | snAgentEnableMgmtModRedunStateChangeTrap | 1 | 1 | Indicates whether the SNMP agent process is permitted to generate management module redundancy state change traps. |
1.3.6.1.4.1.1991.1.1.2.10.1.5 | snAgentRedunBkupBootLoad | 1 | 1 | Action object to down load a new boot code from boot flash storage of the active management module to the backup management modu… |
1.3.6.1.4.1.1991.1.1.2.10.1.6 | snAgentRedunSwitchOver | 1 | 1 | To force a switch-over from standby to active state if the backup management module exists in a chassis. |