The administrative status of BGP4 in the router. The
value 'enabled' denotes that the BGP4 routing is active
in this router; 'disabled' disables BGP4 routing on this router.
Parsed from file sn_bgp4_group.mib.txt
Company: None
Module: FOUNDRY-SN-BGP4-GROUP-MIB
The administrative status of BGP4 in the router. The
value 'enabled' denotes that the BGP4 routing is active
in this router; 'disabled' disables BGP4 routing on this router.
Parsed from file FOUNDRY-SN-BGP4-GROUP-MIB.mib
Module: FOUNDRY-SN-BGP4-GROUP-MIB
Vendor: Foundry Networks, Inc.
Module: FOUNDRY-SN-BGP4-GROUP-MIB
[Automatically extracted from oidview.com]
snBgp4GenAdminStat OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing on this router." ::= { snBgp4Gen 13 }
snBgp4GenAdminStat OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } ACCESS read-write STATUS mandatory DESCRIPTION "The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing on this router." ::= { snBgp4Gen 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.2.11.1.13.0 | snBgp4GenAdminStat | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.2.11.1.1 | snBgp4GenAlwaysCompareMed | 1 | 1 | To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS. |
| 1.3.6.1.4.1.1991.1.2.11.1.2 | snBgp4GenAutoSummary | 1 | 1 | To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.3 | snBgp4GenDefaultLocalPreference | 1 | 1 | To set the default local preference attribute. |
| 1.3.6.1.4.1.1991.1.2.11.1.4 | snBgp4GenDefaultInfoOriginate | 1 | 1 | To enable/disable the default Information Originate. |
| 1.3.6.1.4.1.1991.1.2.11.1.5 | snBgp4GenFastExternalFallover | 1 | 1 | To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used t… |
| 1.3.6.1.4.1.1991.1.2.11.1.6 | snBgp4GenNextBootNeighbors | 1 | 1 | The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The max… |
| 1.3.6.1.4.1.1991.1.2.11.1.7 | snBgp4GenNextBootRoutes | 1 | 1 | The next-boot configured number of Routes. The minimum value of this MIB is snBgp4GenMinRoutes. The maximum value of this MIB is … |
| 1.3.6.1.4.1.1991.1.2.11.1.8 | snBgp4GenSynchronization | 1 | 1 | To enable/disable the synchronization between BGP and your IGP. |
| 1.3.6.1.4.1.1991.1.2.11.1.9 | snBgp4GenKeepAliveTime | 1 | 1 | The Keep alive timer. |
| 1.3.6.1.4.1.1991.1.2.11.1.10 | snBgp4GenHoldTime | 1 | 1 | The Hold time timer. |
| 1.3.6.1.4.1.1991.1.2.11.1.11 | snBgp4GenRouterId | 1 | 1 | BGP Router Id. |
| 1.3.6.1.4.1.1991.1.2.11.1.12 | snBgp4GenTableMap | 1 | 1 | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.1.14 | snBgp4GenDefaultMetric | 1 | 1 | To set default metric values for the BGP4 protocol. |
| 1.3.6.1.4.1.1991.1.2.11.1.15 | snBgp4GenMaxNeighbors | 1 | 1 | The maximum number of neighbors can be configured in a BGP Peer Group. |
| 1.3.6.1.4.1.1991.1.2.11.1.16 | snBgp4GenMinNeighbors | 1 | 1 | The minimum number of neighbors can be configured in a BGP Peer Group. |
| 1.3.6.1.4.1.1991.1.2.11.1.17 | snBgp4GenMaxRoutes | 1 | 1 | The maximum configured number of Routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.18 | snBgp4GenMinRoutes | 1 | 1 | The minimum configured number of Routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.19 | snBgp4GenMaxAddrFilters | 1 | 1 | The maximum configured number of BGP4 address filters. |
| 1.3.6.1.4.1.1991.1.2.11.1.20 | snBgp4GenMaxAggregateAddresses | 1 | 1 | The maximum configured number of BGP4 aggregate addresses. |
| 1.3.6.1.4.1.1991.1.2.11.1.21 | snBgp4GenMaxAsPathFilters | 1 | 1 | The maximum configured number of BGP4 AS-PATH filters. |
| 1.3.6.1.4.1.1991.1.2.11.1.22 | snBgp4GenMaxCommunityFilters | 1 | 1 | The maximum configured number of BGP4 Community filters. |
| 1.3.6.1.4.1.1991.1.2.11.1.23 | snBgp4GenMaxNetworks | 1 | 1 | The maximum configured number of BGP4 Networks. |
| 1.3.6.1.4.1.1991.1.2.11.1.24 | snBgp4GenMaxRouteMapFilters | 1 | 1 | The maximum configured number of BGP4 Route-map Filters. |
| 1.3.6.1.4.1.1991.1.2.11.1.25 | snBgp4GenNeighPrefixMinValue | 1 | 1 | The minimum configured value of BGP4 Neighbor Prefix. |
| 1.3.6.1.4.1.1991.1.2.11.1.26 | snBgp4GenOperNeighbors | 1 | 1 | The current operational max number of neighbors configured for a BGP Group. |
| 1.3.6.1.4.1.1991.1.2.11.1.27 | snBgp4GenOperRoutes | 1 | 1 | The current operational number of Routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.28 | snBgp4GenLocalAs | 1 | 1 | Bgp4 local autonomous system number. |
| 1.3.6.1.4.1.1991.1.2.11.1.29 | snBgp4GenRoutesInstalled | 1 | 1 | Bgp4 installed routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.30 | snBgp4GenAsPathInstalled | 1 | 1 | Bgp4 installed autonomous system path. |
| 1.3.6.1.4.1.1991.1.2.11.1.31 | snBgp4ExternalDistance | 1 | 1 | Administrative distance for BGP external routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.32 | snBgp4InternalDistance | 1 | 1 | Administrative distance for BGP internal routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.33 | snBgp4LocalDistance | 1 | 1 | Administrative distance for BGP local routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.34 | snBgp4OperNumOfAttributes | 1 | 1 | The operational number of attribute entries. |
| 1.3.6.1.4.1.1991.1.2.11.1.35 | snBgp4NextBootMaxAttributes | 1 | 1 | The next boot maximum attribute entries. 10000 means reset to default. |
| 1.3.6.1.4.1.1991.1.2.11.1.36 | snBgp4ClusterId | 1 | 1 | A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default. |
| 1.3.6.1.4.1.1991.1.2.11.1.37 | snBgp4ClientToClientReflection | 1 | 1 | To enable/disable the client to client reflection in BGP4. |
| 1.3.6.1.4.1.1991.1.2.11.1.38 | snBgp4GenTotalNeighbors | 1 | 1 | The current total number of neighbors running in a BGP Group. |
| 1.3.6.1.4.1.1991.1.2.11.1.39 | snBgp4GenMaxPaths | 1 | 1 | The maximum configured number of Paths. |
| 1.3.6.1.4.1.1991.1.2.11.1.40 | snBgp4GenConfedId | 1 | 1 | Bgp4 Confederation Id. |
| 1.3.6.1.4.1.1991.1.2.11.1.41 | snBgp4GenConfedPeers | 1 | 1 | An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented … |
| 1.3.6.1.4.1.1991.1.2.11.1.42 | snBgp4GenDampening | 1 | 1 | The dampening of BGP4 in the router. value 'none' denotes that the BGP4 dampening is off 'parameters' denotes parameters are con… |
| 1.3.6.1.4.1.1991.1.2.11.1.43 | snBgp4GenDampenHalfLife | 1 | 1 | Bgp4 Dampening Half Life. |
| 1.3.6.1.4.1.1991.1.2.11.1.44 | snBgp4GenDampenReuse | 1 | 1 | Bgp4 Dampening Reuse. |
| 1.3.6.1.4.1.1991.1.2.11.1.45 | snBgp4GenDampenSuppress | 1 | 1 | Bgp4 Dampening Suppress. |
| 1.3.6.1.4.1.1991.1.2.11.1.46 | snBgp4GenDampenMaxSuppress | 1 | 1 | Bgp4 Dampening Max Suppress Time. |
| 1.3.6.1.4.1.1991.1.2.11.1.47 | snBgp4GenDampenMap | 1 | 1 | An octet string of the route-map name for dampening, each character of the name is represented by one octet. |