The ownership of this VRRP router interface
can be set either owner(1) or backup(2).
VirRtr SNMP-GET returns incomplete(0), it means
no IP address has assigned to this VRRP router interface.
Parsed from file sn_ip.mib.txt
Company: None
Module: FOUNDRY-SN-IP-MIB
The ownership of this VRRP router interface
can be set either owner(1) or backup(2).
VirRtr SNMP-GET returns incomplete(0), it means
no IP address has assigned to this VRRP router interface.
Parsed from file FOUNDRY-SN-IP-MIB.mib
Module: FOUNDRY-SN-IP-MIB
Vendor: Foundry Networks, Inc.
Module: FOUNDRY-SN-IP-VRRP-MIB
[Automatically extracted from oidview.com]
snVrrpVirRtrOwnership OBJECT-TYPE SYNTAX INTEGER { incomplete(0), owner(1), backup(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The ownership of this VRRP router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this VRRP router interface." ::= { snVrrpVirRtrEntry 3 }
snVrrpVirRtrOwnership OBJECT-TYPE SYNTAX INTEGER { incomplete(0), owner(1), backup(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The ownership of this VRRP router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this VRRP router interface." ::= { snVrrpVirRtrEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.1 | snVrrpVirRtrPort | 0 | 0 | The IP port of this VRRP interface. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.2 | snVrrpVirRtrId | 0 | 0 | One of the virtual router ID of this VRRP interface. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.4 | snVrrpVirRtrCfgPriority | 0 | 0 | The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.5 | snVrrpVirRtrTrackPriority | 0 | 0 | The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtrCurrPriority of this interface… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.6 | snVrrpVirRtrCurrPriority | 0 | 0 | The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.7 | snVrrpVirRtrHelloInt | 0 | 0 | Time interval between advertisements (seconds). |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.8 | snVrrpVirRtrDeadInt | 0 | 0 | Dead interval (seconds). |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.9 | snVrrpVirRtrPreemptMode | 0 | 0 | This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow pree… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.10 | snVrrpVirRtrState | 0 | 0 | This object specifies the VRRP Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.11 | snVrrpVirRtrActivate | 0 | 0 | This object specifies the VRRP Router's activate command as: disabled(0)...deactivate this VRRP Router. enabled(1)....activate th… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.12 | snVrrpVirRtrIpAddrMask | 0 | 0 | The numbers of IP Addresses of this virtual router of this interface. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.13 | snVrrpVirRtrTrackPortMask | 0 | 0 | This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Defaul… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.14 | snVrrpVirRtrTrackVifMask | 0 | 0 | This object specifies the identity of the virtual interface whose state is to be monitored. Each bit is a port of the system. De… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.15 | snVrrpVirRtrRowStatus | 0 | 0 | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.16 | snVrrpVirRtrRxArpPktDropCnts | 0 | 0 | The received VRRP ARP Packet Drop Counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.17 | snVrrpVirRtrRxIpPktDropCnts | 0 | 0 | The received VRRP IP Packet Drop Counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.18 | snVrrpVirRtrRxPortMismatchCnts | 0 | 0 | The received VRRP Port mismatching Counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.19 | snVrrpVirRtrRxNumOfIpMismatchCnts | 0 | 0 | The received VRRP Number of IP Addresses mismatching Counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.20 | snVrrpVirRtrRxIpMismatchCnts | 0 | 0 | The received VRRP IP Address mismatching Counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.21 | snVrrpVirRtrRxHelloIntMismatchCnts | 0 | 0 | The counts of the virtual router interface with hello interval mismatch counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.22 | snVrrpVirRtrRxPriorityZeroFromMasterCnts | 0 | 0 | The counts of the virtual router interface with Priority zero from the master. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.23 | snVrrpVirRtrRxHigherPriorityCnts | 0 | 0 | The counts of the virtual router interface with higher Priority. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.24 | snVrrpVirRtrTransToMasterStateCnts | 0 | 0 | The counts of the virtual router interface transition to master state. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.25 | snVrrpVirRtrTransToBackupStateCnts | 0 | 0 | The counts of the virtual router interface transition to backup state. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.26 | snVrrpVirRtrCurrDeadInt | 0 | 0 | Current Dead interval (in 100 milliseconds). |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.27 | snVrrpVirRtrTrackPortList | 0 | 0 | This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in b… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.28 | snVrrpVirRtrTrackVifPortList | 0 | 0 | This object specifies the identity of the virtual interface whose state is to be monitored. Each port index is a 16-bit integer … |