The maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs
in a router's link-state database reaches
ospfExtLsdbLimit, the router enters Overflow-
State. The router never holds more than
ospfExtLsdbLimit non-default AS-external-LSAs
in its database. OspfExtLsdbLimit MUST be set
identically in all routers attached to the OSPF
backbone and/or any regular OSPF area. (i.e.,
OSPF stub areas and NSSAs are excluded).
Parsed from file sn_ospf_group.mib.txt
Company: None
Module: FOUNDRY-SN-OSPF-GROUP-MIB
The maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs
in a router's link-state database reaches
ospfExtLsdbLimit, the router enters Overflow-
State. The router never holds more than
ospfExtLsdbLimit non-default AS-external-LSAs
in its database. OspfExtLsdbLimit MUST be set
identically in all routers attached to the OSPF
backbone and/or any regular OSPF area. (i.e.,
OSPF stub areas and NSSAs are excluded).
Parsed from file FOUNDRY-SN-OSPF-GROUP-MIB.mib
Module: FOUNDRY-SN-OSPF-GROUP-MIB
Vendor: Foundry Networks, Inc.
Module: FOUNDRY-SN-OSPF-GROUP-MIB
[Automatically extracted from oidview.com]
snOspfExtLsdbLimit OBJECT-TYPE SYNTAX INTEGER (1..2000) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfExtLsdbLimit, the router enters Overflow- State. The router never holds more than ospfExtLsdbLimit non-default AS-external-LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded)." ::= { snOspfGen 11 }
snOspfExtLsdbLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfExtLsdbLimit, the router enters Overflow- State. The router never holds more than ospfExtLsdbLimit non-default AS-external-LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded)." ::= { snOspfGen 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.2.4.1.11.0 | snOspfExtLsdbLimit | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.2.4.1.1 | snOspfRouterId | 1 | 1 | A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should defaul… |
| 1.3.6.1.4.1.1991.1.2.4.1.2 | snOspfAdminStat | 1 | 1 | The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one int… |
| 1.3.6.1.4.1.1991.1.2.4.1.3 | snOspfASBdrRtrStatus | 1 | 1 | A flag to note whether this router is an Autonomous System border router. |
| 1.3.6.1.4.1.1991.1.2.4.1.4 | snOspfRedisMode | 1 | 1 | The Redistribution status of OSPF in the router. The value 'enabled' denotes that the OSPF Redistribution is active; 'disabled' … |
| 1.3.6.1.4.1.1991.1.2.4.1.5 | snOspfDefaultOspfMetricValue | 1 | 1 | The metric of using a default OSPF Metric value on this route. |
| 1.3.6.1.4.1.1991.1.2.4.1.6 | snOspfExternLSACount | 1 | 1 | The number of external (LS type 5) link-state advertisements in the link-state database. |
| 1.3.6.1.4.1.1991.1.2.4.1.7 | snOspfExternLSACksumSum | 1 | 1 | The 32-bit unsigned sum of the LS checksums of the external link-state advertisements contained in the link-state database. This… |
| 1.3.6.1.4.1.1991.1.2.4.1.8 | snOspfOriginateNewLSAs | 1 | 1 | The number of new link-state advertisements that have been originated. This number is incremented each time the router originate… |
| 1.3.6.1.4.1.1991.1.2.4.1.9 | snOspfRxNewLSAs | 1 | 1 | The number of link-state advertisements received determined to be new instantiations. This number does not include newer instant… |
| 1.3.6.1.4.1.1991.1.2.4.1.10 | snOspfOspfRedisMetricType | 1 | 1 | type1: For External Type 1 (comparable value) the intra-area and inter-area routes, it is an OSPF metric plus the External Metric… |
| 1.3.6.1.4.1.1991.1.2.4.1.12 | snOspfExitOverflowInterval | 1 | 1 | The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the rou… |
| 1.3.6.1.4.1.1991.1.2.4.1.13 | snOspfRfc1583Compatibility | 1 | 1 | This allows the ospf routing either compatible with RFC1583 or RFC2178. enabled(1)........activate RFC1583 compatibility rather t… |
| 1.3.6.1.4.1.1991.1.2.4.1.14 | snOspfRouterIdFormat | 1 | 1 | This object is used to specify whether RouterId is represented as IP Address or an Integer. The values that can be written are: int… |
| 1.3.6.1.4.1.1991.1.2.4.1.15 | snOspfDistance | 1 | 1 | OSPF Adminitrative distance. |
| 1.3.6.1.4.1.1991.1.2.4.1.16 | snOspfDistanceIntra | 1 | 1 | OSPF Adminitrative distance - Intra Area. |
| 1.3.6.1.4.1.1991.1.2.4.1.17 | snOspfDistanceInter | 1 | 1 | OSPF Adminitrative distance - Inter Area. |
| 1.3.6.1.4.1.1991.1.2.4.1.18 | snOspfDistanceExternal | 1 | 1 | OSPF Adminitrative distance - External. |