Allow the user login through modem connection.
Note: ASM on some servers does not have serial port support.
Parsed from file RTRSAAG.MIB.txt
Company: ibm
Module: RSA-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
allowModemLogin OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Allow the user login through modem connection. Note: ASM on some servers does not have serial port support." ::= { generalRemoteCfg 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.3.51.1.4.1.1.8.0 | allowModemLogin | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.3.51.1.4.1.1.1 | dialInEnabled | 1 | 1 | If true(1) then the setting is enabled and the remote client is allowed to dial into the ASM. This must be enabled for a dial-in … |
| 1.3.6.1.4.1.2.3.51.1.4.1.1.2 | dedicateSharedSerialPortToSp | 1 | 1 | If true(1) then the setting is enabled and the serial port that can be shared with the host system is dedicated to the ASM. Setti… |
| 1.3.6.1.4.1.2.3.51.1.4.1.1.3 | 3 | 1 | 1 | remoteAlertRetryDelay |
| 1.3.6.1.4.1.2.3.51.1.4.1.1.4 | remoteAlertRetryCount | 1 | 1 | Number of additional times a remote alert will be retried if not succesfully sent. A value of zero indicates no retries will be a… |
| 1.3.6.1.4.1.2.3.51.1.4.1.1.5 | remoteAlertRetryDelay, remoteAlertEntryDelay | 1 | 1 | Number in seconds to delay between retries if sending a remote alert is unsuccessful. |
| 1.3.6.1.4.1.2.3.51.1.4.1.1.6 | remoteAccessTamperDelay | 1 | 1 | Number in minutes to prohibit a remote login attempt after more than 5 sequential login attempts have failed. |
| 1.3.6.1.4.1.2.3.51.1.4.1.1.7 | userAuthenticationMethod | 1 | 1 | Use this field to specify how users attempting to login should be authenticated. There are two methods: Local authentication. Use… |
| 1.3.6.1.4.1.2.3.51.1.4.1.1.9 | webInactivityTimeout | 1 | 1 | Use this field to indicate how long, in minutes, the ASM subsystem will wait before disconnecting an inactive web session. Selec… |
| 1.3.6.1.4.1.2.3.51.1.4.1.1.13 | getPwdLeftDaysTable | 1 | 3 | Get left days before password expired table. |
| 1.3.6.1.4.1.2.3.51.1.4.1.1.20 | customSecuritySettings | 3 | 6 | None |