Disable or enable the interface.
Note: To alter any of the configuration settings for the ethernet
interface the following procedure should be used:
(1)This object should be written with 'interfaceDisabled'
(2)Make the modifications to other settings
(3)This object should be written with 'interfaceEnabled'
(4)Restart the remote supervisor adapter
Also note that when this object has a value of interfaceEnabled
the following is verifed, if this verification fails a error
response will be returned for the set of this object and the
ethernet interface will be left in a disabled state.
(1)Is the range for the MTU between 60-1500
(2)Are the speed settings one of 10Mb, 100Mb, AUTO
(3)Are the speed settings one of Half, Full, AUTO
(4)If DHCP is disabled then is there a valid IP address
Parsed from file RTRSAAG.MIB.txt
Company: ibm
Module: RSA-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
ethernetInterfaceEnabled OBJECT-TYPE SYNTAX INTEGER { interfaceDisabled(0), interfaceEnabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Disable or enable the interface. Note: To alter any of the configuration settings for the ethernet interface the following procedure should be used: (1)This object should be written with 'interfaceDisabled' (2)Make the modifications to other settings (3)This object should be written with 'interfaceEnabled' (4)Restart the remote supervisor adapter Also note that when this object has a value of interfaceEnabled the following is verifed, if this verification fails a error response will be returned for the set of this object and the ethernet interface will be left in a disabled state. (1)Is the range for the MTU between 60-1500 (2)Are the speed settings one of 10Mb, 100Mb, AUTO (3)Are the speed settings one of Half, Full, AUTO (4)If DHCP is disabled then is there a valid IP address " ::= { ethernetInterface 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.3.51.1.4.9.1.1.2.0 | ethernetInterfaceEnabled | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.3.51.1.4.9.1.1.1 | ethernetInterfaceType | 1 | 1 | The type of interface. Indicates 'Ethernet-1'. |
| 1.3.6.1.4.1.2.3.51.1.4.9.1.1.3 | ethernetInterfaceHostName | 1 | 1 | Contains the 64 byte null terminated DNS host name for this interface. |
| 1.3.6.1.4.1.2.3.51.1.4.9.1.1.4 | ethernetInterfaceIPAddress | 1 | 1 | Contains the IP address for the ethernet interface. |
| 1.3.6.1.4.1.2.3.51.1.4.9.1.1.5 | ethernetInterfaceDataRate | 1 | 1 | Specifies the data transfer rate to be used over the ethernet interface 10Mb/100Mb/Auto. |
| 1.3.6.1.4.1.2.3.51.1.4.9.1.1.6 | ethernetInterfaceDuplexSetting | 1 | 1 | Specifies the duplex settings for the data transfer rate to be used over the ethernet interface Half/Full/Auto. |
| 1.3.6.1.4.1.2.3.51.1.4.9.1.1.7 | ethernetInterfaceLAA | 1 | 1 | Specifies the locally administered MAC address. The locally administered address must be a hexadecimal value between 0000000000… |
| 1.3.6.1.4.1.2.3.51.1.4.9.1.1.8 | ethernetInterfaceDhcpEnabled | 1 | 1 | Disable or enable DHCP on this interface. |
| 1.3.6.1.4.1.2.3.51.1.4.9.1.1.9 | ethernetInterfaceGatewayIPAddress | 1 | 1 | Contains the IP address of the gateway/router for the ethernet interface. |
| 1.3.6.1.4.1.2.3.51.1.4.9.1.1.10 | ethernetInterfaceBIA | 1 | 1 | Specifies the burned-in MAC (BIA) address. |
| 1.3.6.1.4.1.2.3.51.1.4.9.1.1.13 | ethernetInterfaceMTU | 1 | 1 | Contains the Maximum Transmission Unit(MTU) for the ethernet interface |
| 1.3.6.1.4.1.2.3.51.1.4.9.1.1.14 | ethernetInterfaceSubnetMask | 1 | 1 | Contains the Subnet Mask for the ethernet interface |
| 1.3.6.1.4.1.2.3.51.1.4.9.1.1.16 | dhcpEthernetInterface | 9 | 18 | None |