Reference record for OID 1.3.6.1.4.1.2.3.51.2.22.9.4

parent

1.3.6.1.4.1.2.3.51.2.22.9 (firmwareUpdate)

node code

4

node name

firmwareUpdateStart

dot oid

1.3.6.1.4.1.2.3.51.2.22.9.4

type

OBJECT-TYPE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) bladeCenter(22) firmwareUpdate(9) firmwareUpdateStart(4)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) bladeCenter(22) firmwareUpdate(9) firmwareUpdateStart(4)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) bladeCenter(22) firmwareUpdate(9) firmwareUpdateStart(4)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) bladeCenter(22) firmwareUpdate(9) firmwareUpdateStart(4)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) bladeCenter(22) firmwareUpdate(9) firmwareUpdateStart(4)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) bladeCenter(22) firmwareUpdate(9) firmwareUpdateStart(4)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/ibm/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/bladeCenter/firmwareUpdate/firmwareUpdateStart

/iso/identified-organization/dod/internet/private/enterprises/ibm/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/bladeCenter/firmwareUpdate/firmwareUpdateStart

/iso/org/dod/internet/private/enterprise/ibm/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/bladeCenter/firmwareUpdate/firmwareUpdateStart

/iso/org/dod/internet/private/enterprises/ibm/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/bladeCenter/firmwareUpdate/firmwareUpdateStart

/iso/iso-identified-organization/dod/internet/private/enterprise/ibm/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/bladeCenter/firmwareUpdate/firmwareUpdateStart

/iso/iso-identified-organization/dod/internet/private/enterprises/ibm/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/bladeCenter/firmwareUpdate/firmwareUpdateStart

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/2/3/51/2/22/9/4

Description by circitor

Start updating the firmware of the specified target module.
Note 1: Depending on the target, it might take up to several
minutes for the flash update to complete. Do not reset the
target until the control has been returned. At this point,
the results will be displayed.
Note 2 : Use firmwareUpdateStatus to confirm the status of
the last firmware update initiated by SNMP method. The
Management Module must be restarted for the new firmware to
take affect.

NOTE: Value returned for the GET command is meaningless
for this MIB.

Parsed from file BLADE-MIB.mib
Module: BLADE-MIB

Information by oid_info

Vendor: IBM
Module: BLADE-MIB

[Automatically extracted from oidview.com]

Information by circitor

firmwareUpdateStart         OBJECT-TYPE
                                SYNTAX INTEGER { 
                                  execute(1)
                                }  
                                ACCESS  read-write
                                STATUS  mandatory
                                DESCRIPTION
                                "Start updating the firmware of the specified target module.    
                                Note 1: Depending on the target, it might take up to several 
                                minutes for the flash update to complete.  Do not reset the 
                                target until the control has been returned.  At this point, 
                                the results will be displayed. 
                                Note 2 : Use firmwareUpdateStatus to confirm the status of 
                                the last firmware update initiated by SNMP method.  The 
                                Management Module must be restarted for the new firmware to 
                                take affect.
                                
                                NOTE: Value returned for the GET command is meaningless 
                                for this MIB."
                                ::= { firmwareUpdate 4 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.2)

Bob Moore

Brothers (4)