This value indicates the desired state of the dependent
node with respect to its capability to handle
Switch Manager protocol via its SP switch interface.
If the dependent node is not in the desired state,
then the SNMP Agent triggers actions to change its state
to the desired state.
A value of up(1) indicates that the node should be
initialized and configured sufficiently
to handle the Switch Manager protocol.
A value of down(2) indicates that the node should be
reset such that it is not able to receive and handle
Switch Manager protocol messages on the SP switch
network.
A value of reconfigure(3) indicates that the SNMP Agent
must send the switchInfoNeeded trap to request new SP
switch configuration information for the dependent
node. This causes the SNMP Manager to send the
new configuration information for the dependent node
MIB objects via set-request PDU(s).
Once the new values are set by the SNMP Manager,
the SNMP Agent reinitializes and reconfigures the dependent
node sufficiently to handle the Switch Manager protocol.
Parsed from file ibmSPDepNode.smi.txt
Company: None
Module: DEPNODE-MIB
This value indicates the desired state of the dependent
node with respect to its capability to handle
Switch Manager protocol via its SP switch interface.
If the dependent node is not in the desired state,
then the SNMP Agent triggers actions to change its state
to the desired state.
A value of up(1) indicates that the node should be
initialized and configured sufficiently
to handle the Switch Manager protocol.
A value of down(2) indicates that the node should be
reset such that it is not able to receive and handle
Switch Manager protocol messages on the SP switch
network.
A value of reconfigure(3) indicates that the SNMP Agent
must send the switchInfoNeeded trap to request new SP
switch configuration information for the dependent
node. This causes the SNMP Manager to send the
new configuration information for the dependent node
MIB objects via set-request PDU(s).
Once the new values are set by the SNMP Manager,
the SNMP Agent reinitializes and reconfigures the dependent
node sufficiently to handle the Switch Manager protocol.
Parsed from file DEPNODE-MIB.mib
Module: DEPNODE-MIB
Vendor: IBM
Module: DEPNODE-MIB
[Automatically extracted from oidview.com]
ibmSPDepAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), reconfigure(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the desired state of the dependent node with respect to its capability to handle Switch Manager protocol via its SP switch interface. If the dependent node is not in the desired state, then the SNMP Agent triggers actions to change its state to the desired state. A value of up(1) indicates that the node should be initialized and configured sufficiently to handle the Switch Manager protocol. A value of down(2) indicates that the node should be reset such that it is not able to receive and handle Switch Manager protocol messages on the SP switch network. A value of reconfigure(3) indicates that the SNMP Agent must send the switchInfoNeeded trap to request new SP switch configuration information for the dependent node. This causes the SNMP Manager to send the new configuration information for the dependent node MIB objects via set-request PDU(s). Once the new values are set by the SNMP Manager, the SNMP Agent reinitializes and reconfigures the dependent node sufficiently to handle the Switch Manager protocol." ::= { ibmSPDepNodeEntry 15 }
ibmSPDepAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), reconfigure(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the desired state of the dependent node with respect to its capability to handle Switch Manager protocol via its SP switch interface. If the dependent node is not in the desired state, then the SNMP Agent triggers actions to change its state to the desired state. A value of up(1) indicates that the node should be initialized and configured sufficiently to handle the Switch Manager protocol. A value of down(2) indicates that the node should be reset such that it is not able to receive and handle Switch Manager protocol messages on the SP switch network. A value of reconfigure(3) indicates that the SNMP Agent must send the switchInfoNeeded trap to request new SP switch configuration information for the dependent node. This causes the SNMP Manager to send the new configuration information for the dependent node MIB objects via set-request PDU(s). Once the new values are set by the SNMP Manager, the SNMP Agent reinitializes and reconfigures the dependent node sufficiently to handle the Switch Manager protocol." ::= { ibmSPDepNodeEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.117.4.1.1.1 | ibmSPDepNodeName | 0 | 0 | Identifier assigned to this node in its system's administrative environment. |
| 1.3.6.1.4.1.2.6.117.4.1.1.2 | ibmSPDepNodeNumber | 0 | 0 | Relative node number assigned to this node in the SP system. Note that this is distinct from switch node number. |
| 1.3.6.1.4.1.2.6.117.4.1.1.3 | ibmSPDepSwToken | 0 | 0 | Opaque correlator assigned in the SP system for this node's switch connection. |
| 1.3.6.1.4.1.2.6.117.4.1.1.4 | ibmSPDepSwARP | 0 | 0 | Indicates whether ARP is enabled for the partition of the switch network that contains the associated dependent secondary node. NO… |
| 1.3.6.1.4.1.2.6.117.4.1.1.5 | ibmSPDepSwNodeNumber | 0 | 0 | The switch node number of the associated SP switch interface. In common networking terminology, this is the physical address for… |
| 1.3.6.1.4.1.2.6.117.4.1.1.6 | ibmSPDepIPaddr | 0 | 0 | The IP address for the associated SP switch interface. |
| 1.3.6.1.4.1.2.6.117.4.1.1.7 | ibmSPDepNetMask | 0 | 0 | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits s… |
| 1.3.6.1.4.1.2.6.117.4.1.1.8 | ibmSPDepIPMaxLinkPkt | 0 | 0 | The maximum number of bytes in the data portion of link-layer packets for IP datagrams on the SP switch network. |
| 1.3.6.1.4.1.2.6.117.4.1.1.9 | ibmSPDepIPHostOffset | 0 | 0 | This value is the difference between switch node numbers and the host portion of the corresponding IP addresses when ARP is disab… |
| 1.3.6.1.4.1.2.6.117.4.1.1.10 | ibmSPDepConfigState | 0 | 0 | This value indicates the final configuration state of the corresponding SP switch interface. |
| 1.3.6.1.4.1.2.6.117.4.1.1.11 | ibmSPDepSysName | 0 | 0 | The fully-qualified domain name of the SP system partition that contains this dependent node. This name is administratively assig… |
| 1.3.6.1.4.1.2.6.117.4.1.1.12 | ibmSPDepNodeState | 0 | 0 | This value indicates the state of the dependent node with respect to its capability to handle Switch Manager protocol via its SP … |
| 1.3.6.1.4.1.2.6.117.4.1.1.13 | ibmSPDepSwChipLink | 0 | 0 | The send port number for packets from the adjacent switch chip to the dependent node. The dependent node needs this value to buil… |
| 1.3.6.1.4.1.2.6.117.4.1.1.14 | ibmSPDepNodeDelay | 0 | 0 | This value is an estimate of how many clock cycles elapse before a clock synchronization packet sent from the adjacent switch chi… |