Index to point to command output result type.
The results of the command execution are converted
to the type set, displaystring, integer, counter,
or gauge.
Parsed from file ibm-sysmon6k.mib.txt
Company: None
Module: SYSMON6K-MIB
Index to point to command output result type.
The results of the command execution are converted
to the type set, displaystring, integer, counter,
or gauge.
Parsed from file SYSINFO-MIB.mib
Module: SYSINFO-MIB
Vendor: IBM
Module: SYSINFO-MIB
[Automatically extracted from oidview.com]
sm6kCommandOutputResultIndex OBJECT-TYPE SYNTAX INTEGER { displaystring(1), integer(2), counter(3), gauge(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Index to point to command output result type. The results of the command execution are converted to the type set, displaystring, integer, counter, or gauge." ::= { sm6kCommandEntry 10 }
smSiaCommandOutputResultIndex OBJECT-TYPE SYNTAX INTEGER { displaystring(1), integer(2), counter(3), gauge(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Index to point to command output result type. The results of the command execution are converted to the type set, displaystring, integer, counter, or gauge." ::= { smSiaCommandEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.12.4.1.1.1 | smSiaCommandState, sm6kCommandState | 0 | 0 | State of command for execution: disabled (1), invalid (2), or enabled (3). |
| 1.3.6.1.4.1.2.6.12.4.1.1.2 | smSiaCommandName, sm6kCommandName | 0 | 0 | Command name for use as a label and row instance. The selection of a row in the table uses the command name as the instance for … |
| 1.3.6.1.4.1.2.6.12.4.1.1.3 | smSiaCommandDescription, sm6kCommandDescription | 0 | 0 | Command description for the command to execute. |
| 1.3.6.1.4.1.2.6.12.4.1.1.4 | smSiaCommandOwnerID, sm6kCommandOwnerID | 0 | 0 | Owner ID (IP address or hostname) who generated the command entry. This must be initialized by the user. |
| 1.3.6.1.4.1.2.6.12.4.1.1.5 | smSiaCommandGetStringAndParameters, sm6kCommandGetStringAndParameters | 0 | 0 | Command string and parameters for execution on a GET request. The GET request must be issued to the sm6kCommandDisplayStringResu… |
| 1.3.6.1.4.1.2.6.12.4.1.1.6 | smSiaCommandSetStringAndParameters, sm6kCommandSetStringAndParameters | 0 | 0 | Command string and parameters for execution on a SET request. The SET request must be issued to the sm6kCommandDisplayStringResu… |
| 1.3.6.1.4.1.2.6.12.4.1.1.7 | smSiaCommandTimeOutValue, sm6kCommandTimeOutValue | 0 | 0 | Time out value in seconds for command execution. The default is three seconds. Time outs over twenty seconds cause subagent perf… |
| 1.3.6.1.4.1.2.6.12.4.1.1.8 | smSiaCommandCountToLive, sm6kCommandCountToLive | 0 | 0 | Count to live in seconds before the command to execute is executed again. This value is a count down from the time to live value… |
| 1.3.6.1.4.1.2.6.12.4.1.1.9 | smSiaCommandTimeToLive, sm6kCommandTimeToLive | 0 | 0 | Time to live value in seconds before the GET or SET command is executed based on the last time the command was run. The CountToLi… |
| 1.3.6.1.4.1.2.6.12.4.1.1.11 | smSiaCommandOutputRowIndex, sm6kCommandOutputRowIndex | 0 | 0 | Index for the row to be returned. New line is the delimiter for row. A value of zero returns all rows. This allows the parsing … |
| 1.3.6.1.4.1.2.6.12.4.1.1.12 | smSiaCommandOutputColumnIndex, sm6kCommandOutputColumnIndex | 0 | 0 | Index for the column to be returned. White space is the delimiter for the column. A value of zero returns all columns. This all… |
| 1.3.6.1.4.1.2.6.12.4.1.1.13 | smSiaCommandDisplayStringResult, sm6kCommandDisplayStringResult | 0 | 0 | Command output for ASCII. |
| 1.3.6.1.4.1.2.6.12.4.1.1.14 | smSiaCommandIntegerResult, sm6kCommandIntegerResult | 0 | 0 | Command result for integer. For each get/set request the response is saved as a signed integer. The range is -2147483648 to 214… |
| 1.3.6.1.4.1.2.6.12.4.1.1.15 | smSiaCommandCounterResult, sm6kCommandCounterResult | 0 | 0 | Command result for counter. For each get/set request the command response is saved as an unsigned integer. The range is 0 to 429… |
| 1.3.6.1.4.1.2.6.12.4.1.1.16 | smSiaCommandGaugeResult, sm6kCommandGaugeResult | 0 | 0 | Command result for gauge. For each get/set request the command response is saved as an unsigned integer. The range is 0 to 42949… |
| 1.3.6.1.4.1.2.6.12.4.1.1.17 | smSiaCommandExecutionReturnCode, sm6kCommandExecutionReturnCode | 0 | 0 | Command return code from the command execution. |
| 1.3.6.1.4.1.2.6.12.4.1.1.18 | smSiaCommandStandardError, sm6kCommandStandardError | 0 | 0 | Standard error output from the command execution. |