This variable defines how to start the microcode
in the segment.
normal(1): Use NVRAM information and flash ROM
microcode to start up the system.
tftp-download(2):
Always download the new version of
microcode into RAM and start it.
bootp-get-ip(3):
Get the IP information from the BootP server,
and then start up the microcode in flash ROM.
bootp-download(4):
Get the IP information from the BootP server,
and then download the microcode from the
TFTP server.
bootp-upgrade(5):
Get the IP information from the BootP server,
and then download the microcode from the
TFTP server. After the download has been
completed, upgrade the microcode in system flash
ROM.
Parsed from file ibm8237.mib.txt
Company: ibm
Module: IBM-8237-MIB
Vendor: IBM
Module: IBM-8237-MIB (ibm8237.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
basicHubAgentBootupOption OBJECT-TYPE SYNTAX INTEGER { normal(1), tftp-download(2), bootp-get-ip(3), bootp-download(4), bootp-upgrade(5), not-present(1000) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable defines how to start the microcode in the segment. normal(1): Use NVRAM information and flash ROM microcode to start up the system. tftp-download(2): Always download the new version of microcode into RAM and start it. bootp-get-ip(3): Get the IP information from the BootP server, and then start up the microcode in flash ROM. bootp-download(4): Get the IP information from the BootP server, and then download the microcode from the TFTP server. bootp-upgrade(5): Get the IP information from the BootP server, and then download the microcode from the TFTP server. After the download has been completed, upgrade the microcode in system flash ROM." ::= { basicHubEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.134.2.2.1.3.1.1.1 | basicHubIndex | 0 | 0 | ID number of a hub, used to select it. |
| 1.3.6.1.4.1.2.6.134.2.2.1.3.1.1.2 | basicHubType | 0 | 0 | Type of hub. |
| 1.3.6.1.4.1.2.6.134.2.2.1.3.1.1.3 | basicHubPosition | 0 | 0 | Physical position of a hub in top-down order. |
| 1.3.6.1.4.1.2.6.134.2.2.1.3.1.1.4 | basicHubSegment | 0 | 0 | Segment number of the backplane to which the hub is connected. Value 0 means that the hub is isolated, not attached to any segmen… |
| 1.3.6.1.4.1.2.6.134.2.2.1.3.1.1.5 | basicHubName | 0 | 0 | Mnemonic name of a hub. |
| 1.3.6.1.4.1.2.6.134.2.2.1.3.1.1.6 | basicHubHwVer | 0 | 0 | Hardware version of the hub. |
| 1.3.6.1.4.1.2.6.134.2.2.1.3.1.1.7 | basicHubFwMajorVer | 0 | 0 | Microcode major version of this hub. |
| 1.3.6.1.4.1.2.6.134.2.2.1.3.1.1.8 | basicHubFwMinorVer | 0 | 0 | Microcode minor version of this hub. |
| 1.3.6.1.4.1.2.6.134.2.2.1.3.1.1.9 | basicHubFanStatus | 0 | 0 | Status of the fan. |
| 1.3.6.1.4.1.2.6.134.2.2.1.3.1.1.10 | basicHubBootupCodeMajorVer | 0 | 0 | Bootup microcode major version of this hub. |
| 1.3.6.1.4.1.2.6.134.2.2.1.3.1.1.11 | basicHubBootupCodeMinorVer | 0 | 0 | Bootup microcode minor version of this hub. |
| 1.3.6.1.4.1.2.6.134.2.2.1.3.1.1.12 | basicHubAgentStatus | 0 | 0 | Status of this hub agent. Each segment allows an SNMP primary agent. primary(2): The agent in this segment is a primary agent. ba… |
| 1.3.6.1.4.1.2.6.134.2.2.1.3.1.1.13 | basicHubAgentPhysAddr | 0 | 0 | MAC address of this hub agent |
| 1.3.6.1.4.1.2.6.134.2.2.1.3.1.1.15 | basicHubAgentBaudrate | 0 | 0 | Baud rate of the console port |