This object specifies a threshold used in beacon recovery.
It is the number of times a port disabled by the beaconing
algorithm is allowed to be automatically re-enabled. After
the threshold has been met, the user must manually disable
and then re-enable the port to resume normal operation of
the port.
Parsed from file ibm8239.mib.txt
Company: ibm
Module: IBM8239-MIB
Vendor: IBM
Module: IBM8239-MIB (ibm8239.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
(
0..255 )
Automatically extracted from www.mibdepot.com
trHubBeaconThreshold OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies a threshold used in beacon recovery. It is the number of times a port disabled by the beaconing algorithm is allowed to be automatically re-enabled. After the threshold has been met, the user must manually disable and then re-enable the port to resume normal operation of the port." ::= { trHubEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.138.1.5.1.1.1 | trHubId | 0 | 0 | ID number of a hub, used to select it. Reading this value displays its current hub ID. |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.2 | trHubSerialNumber | 0 | 0 | The serial number of this hub. |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.3 | trHubModelNumber | 0 | 0 | The model number of this hub. |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.4 | trHubReset | 0 | 0 | Resets the specified hub. Setting this object to reset(2) will reset the hub in the stack. Configuration changes that have not … |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.5 | trHubRingSpeed | 0 | 0 | The ring's bandwidth. |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.6 | trHubCodeVersion | 0 | 0 | The version number of the code running on this hub. |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.7 | trHubLastCodeLoadStatus | 0 | 0 | The status of the last code load attempt to this hub. |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.8 | trHubFanStatus | 0 | 0 | The status of the fan in this hub. |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.9 | trHubUpTime | 0 | 0 | The time this hub has been up since the last reset. |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.10 | trHubSpeedThreshold | 0 | 0 | The object specifies a threshold used for speed detection. It is the number of times a port disabled due to detection of a wrong … |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.12 | trHubNumberPorts | 0 | 0 | The number of ports installed on this hub. |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.13 | trHubRecoveryAsic1 | 0 | 0 | A 6 octect address used by the first recovery ASIC on this module. |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.14 | trHubRecoveryAsic2 | 0 | 0 | A 6 octect address used by the second recovery ASIC on this module. |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.15 | trHubChangeHubId | 0 | 0 | The new id number for this hub. Writing this value causes the hub to be assigned a new value. If the requested id is already in … |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.16 | trHubExpansionCardType | 0 | 0 | The type of expansion card installed if any. |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.17 | trHubRiroCardType | 0 | 0 | The type of option card installed if any. |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.18 | trHubDataInStatus | 0 | 0 | The state of the data-in wrap point. unwrapped means this hub's data-in is attached to the local stack's data ring. wrapped means… |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.19 | trHubDataOutStatus | 0 | 0 | The state of the data-out wrap point. unwrapped means this hub's data-out is attached to the local stack's data ring. wrapped mea… |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.20 | trHubPortIsolateStatus | 0 | 0 | The state of the isolate port wrap point (controls all ports 1-32). wrapped means the main and expansion ports are not attached … |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.21 | trHubPortMainStatus | 0 | 0 | The state of the main ports (ports 1-16) wrap point. wrapped means the main ports are not attached to the stack ring. unwrapped m… |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.22 | trHubPortExpStatus | 0 | 0 | The state of the hub expansion ports (ports 17-32) wrap point. wrapped means the expansion ports are not attached to the stack r… |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.23 | trHubControlInStatus | 0 | 0 | The state of the control-in port. wrapped means the hub can not communicate to an external hub via control-in. unwrapped means th… |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.24 | trHubControlOutStatus | 0 | 0 | The state of the control-out port. wrapped means the hub can not communicate to an external hub via control-out. unwrapped means… |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.25 | trHubRiroCardRingInStatus | 0 | 0 | The state of the ring-in port. wrapped means the hub can not communicate to an external segment via ring-in. unwrapped means the … |
| 1.3.6.1.4.1.2.6.138.1.5.1.1.26 | trHubRiroCardRingOutStatus | 0 | 0 | The state of the ring-out port. wrapped means the hub can not communicate to an external segment via ring-out. unwrapped means th… |