This object is used to start/stop the configuration data upload. The file
name of the TFTP upload destination is specified by the
agentConfigUploadFileString object.
1. The user can start up a configuration upload session only
when the last configuration upload session is terminated.
Otherwise, any request to start up a new configuration upload
session will be rejected.
The user can start up a configuration upload by setting
the value 'enabled(1)' to this object if and only if the
following conditions are satisfied:
a). The current value of this object is 'disabled(2)'
b). The value of object agentConfigUploadOperState is
'completed(2)' or 'aborted(4)'.
Once configuration upload is enabled, the value of object
agentConfigUploadOperState will be changed to 'in-progress(1)'
to indicate that configuration upload is on going.
2. Once the configuration upload is terminated (completed or aborted),
the value of this object will return to 'disabled(2)' automatically.
3. The user can abort a configuration upload session by setting
this object to 'disabled(2)' only if the current value of
agentConfigUploadOperState is 'in-progress(1)'.
Otherwise, setting this object to 'disabled(2)' will be ignored.
The value of object agentConfigUploadOperState will be changed
to 'wait-abort(3)' to indicate that the aborting of configuration
upload is in progress. The value of object agentConfigUploadOperState
will be changed to 'aborted(4)' again when the configuration upload
session is closed.
4. The default value of this object is 'disabled(2)'.
Parsed from file Agentcmn.mib.txt
Company: ibm
Module: AGENTCMN-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
agentConfigUploadRequest OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to start/stop the configuration data upload. The file name of the TFTP upload destination is specified by the agentConfigUploadFileString object. 1. The user can start up a configuration upload session only when the last configuration upload session is terminated. Otherwise, any request to start up a new configuration upload session will be rejected. The user can start up a configuration upload by setting the value 'enabled(1)' to this object if and only if the following conditions are satisfied: a). The current value of this object is 'disabled(2)' b). The value of object agentConfigUploadOperState is 'completed(2)' or 'aborted(4)'. Once configuration upload is enabled, the value of object agentConfigUploadOperState will be changed to 'in-progress(1)' to indicate that configuration upload is on going. 2. Once the configuration upload is terminated (completed or aborted), the value of this object will return to 'disabled(2)' automatically. 3. The user can abort a configuration upload session by setting this object to 'disabled(2)' only if the current value of agentConfigUploadOperState is 'in-progress(1)'. Otherwise, setting this object to 'disabled(2)' will be ignored. The value of object agentConfigUploadOperState will be changed to 'wait-abort(3)' to indicate that the aborting of configuration upload is in progress. The value of object agentConfigUploadOperState will be changed to 'aborted(4)' again when the configuration upload session is closed. 4. The default value of this object is 'disabled(2)'." ::= { agentBasicCfg 22 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2.6.148.1.1.22.0 | agentConfigUploadRequest | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2.6.148.1.1.1 | agentMgmtMethod | 1 | 1 | The network management method supported by this agent. |
1.3.6.1.4.1.2.6.148.1.1.2 | agentBootRomFwVers | 1 | 1 | The Agent Boot ROM firmware version in the form of 'Ver WWW Rel XXX Mod YYY PTF ZZZ' format, where the meaning of W, X, Y, and… |
1.3.6.1.4.1.2.6.148.1.1.3 | agentHwRevision | 1 | 1 | The H/W board revision of this agent, in the form of 'Ver WWW Rel XXX Mod YYY PTF ZZZ' format, where the meaning of W, X, Y, a… |
1.3.6.1.4.1.2.6.148.1.1.4 | agentRuntimeSwVers | 1 | 1 | The Agent Runtime software version in the form of 'Ver WWW Rel XXX Mod YYY PTF ZZZ' format, where the meaning of W, X, Y, and … |
1.3.6.1.4.1.2.6.148.1.1.5 | agentWebPageVers | 1 | 1 | The agent WEB page version in the form of 'Ver WWW Rel XXX Mod YYY PTF ZZZ' format, where the meaning of W, X, Y, and Z is 'Ve… |
1.3.6.1.4.1.2.6.148.1.1.6 | agentMibInfoDescr | 1 | 1 | A textual description of the MIB that was implemented by the agent. The description includes the MIB name, version identificatio… |
1.3.6.1.4.1.2.6.148.1.1.7 | agentRestart | 1 | 1 | This object is used to reset the agent. Writing the value coldRestart(3) to this object will cause the agent hardware to be reset… |
1.3.6.1.4.1.2.6.148.1.1.8 | agentMasterTable | 0 | 0 | None |
1.3.6.1.4.1.2.6.148.1.1.9 | agentTrapDescrTable | 1 | 3 | A textual description regarding the trap that is supported by this agent. |
1.3.6.1.4.1.2.6.148.1.1.10 | agentWebBasedMgmtControl | 1 | 1 | The Web-Based Management can be enabled or disabled by this object. |
1.3.6.1.4.1.2.6.148.1.1.11 | agentOutOfBandMgmtControl | 1 | 1 | The mode of the serial port will be configured as out-of-band after the system restart if this object is enabled, otherwise, the … |
1.3.6.1.4.1.2.6.148.1.1.12 | agentOutOfBandMgmtStatus | 1 | 1 | This is the current mode of the serial port. The serial port can be configured either as a local console port or out-of-band slip… |
1.3.6.1.4.1.2.6.148.1.1.13 | agentOutOfBandBaudRate | 1 | 1 | The serial port baud rate when the agentOutOfBandMgmtControl is in out-of-band mode. The other parameters required for out-of-ban… |
1.3.6.1.4.1.2.6.148.1.1.14 | agentBootRomCodeUpdateRequest | 1 | 1 | This object is used to update the BootLoad image via the selected files. The TFTP download shall be performed to download the sel… |
1.3.6.1.4.1.2.6.148.1.1.15 | agentConfigDownloadRequest | 1 | 1 | This object is used to update the Configuration image via the selected files. The TFTP download shall be performed to download th… |
1.3.6.1.4.1.2.6.148.1.1.16 | agentWebPageUpdateRequest | 1 | 1 | This object is used to update the Web Page image via the selected files. The TFTP download shall be performed to download the sel… |
1.3.6.1.4.1.2.6.148.1.1.17 | agentRuntimeImgUpdateRequest | 1 | 1 | This object is used to update the Runtime image via the selected files. The TFTP download shall be performed to download the sele… |
1.3.6.1.4.1.2.6.148.1.1.18 | agentBootRomFileString | 1 | 1 | The path and the name of the BootRom Code file to be downloaded from the tftp server. |
1.3.6.1.4.1.2.6.148.1.1.19 | agentRuntimeFileString | 1 | 1 | The path and the name of the runtime software image file to be downloaded from the tftp server. |
1.3.6.1.4.1.2.6.148.1.1.20 | agentWebPageFileString | 1 | 1 | The path and the name of the WEB page file to be downloaded from the tftp server. |
1.3.6.1.4.1.2.6.148.1.1.21 | agentConfigDownloadFileString | 1 | 1 | The path and the name of the configuration file to be downloaded from the tftp server. |
1.3.6.1.4.1.2.6.148.1.1.23 | agentConfigUploadFileString | 1 | 1 | The path and the name of the configuration file to be uploaded to the tftp server. |
1.3.6.1.4.1.2.6.148.1.1.24 | agentTelnetSessionAutoLogoutInterval | 1 | 1 | This object sets the Telnet Session auto logout interval in minutes. If within the idle time there is not any activity from the T… |
1.3.6.1.4.1.2.6.148.1.1.25 | agentConfigUploadOperState | 1 | 1 | This object indicates the state of configuration upload operation. 1. Once the value of agentConfigUploadRequest is set to 'enabl… |
1.3.6.1.4.1.2.6.148.1.1.26 | agentConfigUploadErrorStatus | 1 | 1 | This object returns the result of a configuration upload operation. |
1.3.6.1.4.1.2.6.148.1.1.27 | agentConsoleSessionAutoLogoutInterval | 1 | 1 | This object sets the local console auto logout interval in minutes. If within the idle time there is not any activity from the co… |