This object enables/disables the Port Monitoring function of the
switch. When this function being enabled, all frames received by
or destined for the port S(identified sw2MirroredPort) by will be
copied to the port D(identified by the sw2MonitoringPort).
Note: 1. Only 'enabled(1)' or 'disabled(2)' are allowed to set.
2. Some criteria must be maintained if user want to enable
this function, or the action will be rejected by
returning 'disabled-due-to-invalid-parameter(3)'.
2A.The value of 'sw2MonitoringPort' cannot be identical to
the value of 'sw2MirroredPort'.
2B.The value of 'sw2MonitoringPort' cannot be member of a
trunk group.
Parsed from file ibm8275-2xx.mib.txt
Company: ibm
Module: IBM8275-2XX-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
sw2MonitoringFunctionStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), disabled-due-to-invalid-parameter(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enables/disables the Port Monitoring function of the switch. When this function being enabled, all frames received by or destined for the port S(identified sw2MirroredPort) by will be copied to the port D(identified by the sw2MonitoringPort). Note: 1. Only 'enabled(1)' or 'disabled(2)' are allowed to set. 2. Some criteria must be maintained if user want to enable this function, or the action will be rejected by returning 'disabled-due-to-invalid-parameter(3)'. 2A.The value of 'sw2MonitoringPort' cannot be identical to the value of 'sw2MirroredPort'. 2B.The value of 'sw2MonitoringPort' cannot be member of a trunk group. " ::= { sw2Cfg 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.156.1.1.7.0 | sw2MonitoringFunctionStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.156.1.1.1 | sw2BaseHwVer | 1 | 1 | The switch base board h/w version in the form of 'Ver WWW Rel XXX Mod YYY PTF ZZZ' format, where the meaning of W, X, Y, and Z… |
| 1.3.6.1.4.1.2.6.156.1.1.2 | sw2PktBufferSize | 1 | 1 | The total packet buffer size on this switch base board in the form of 'DRAM X MB' format. It tells how many (x) mega- bytes of th… |
| 1.3.6.1.4.1.2.6.156.1.1.3 | sw2FrontPanelLedStatus | 1 | 1 | The front panel's display information. |
| 1.3.6.1.4.1.2.6.156.1.1.4 | sw2MiniConsoleInputControl | 1 | 1 | This object provides the capability to control mini-console input. Reading this object will only return the last mini-console inp… |
| 1.3.6.1.4.1.2.6.156.1.1.5 | sw2MonitoringPort | 1 | 1 | A port, selected through 'sw2MirroredPort', can be selected for port monitoring. In this case, all frames received by or destined… |
| 1.3.6.1.4.1.2.6.156.1.1.6 | sw2MirroredPort | 1 | 1 | See the description of sw2MonitoringPort. |
| 1.3.6.1.4.1.2.6.156.1.1.8 | sw2TftpDownloadPort | 1 | 1 | This object specifies the switch port to support the TFTP download capability. |
| 1.3.6.1.4.1.2.6.156.1.1.9 | sw2MaxNumberOfTrunksSupported | 1 | 1 | sw2MaxNumberOftrunksSupported |
| 1.3.6.1.4.1.2.6.156.1.1.10 | sw2TrunkGroupTable | 1 | 4 | A list of trunk groups that exist within this switch. |
| 1.3.6.1.4.1.2.6.156.1.1.11 | sw2LDBSize | 1 | 1 | The learning database size of this switch in the form of 'xxxx' nodes format. |
| 1.3.6.1.4.1.2.6.156.1.1.12 | sw2NumNodeInDB | 1 | 1 | The number of nodes currently existing in the database. These include the permanent address and node address dynamically learned … |
| 1.3.6.1.4.1.2.6.156.1.1.13 | sw2StpOprStatus | 1 | 1 | This is used to specify whether the spanning tree protocol for the switch should be enabled(1) or disabled(2). |