The administrative status requested by management for
GVRP. The value active(1) indicates that GVRP should
be enabled on this device, on all ports for which it has
not been specifically disabled. When inactive(2), GVRP
is disabled on all ports and all GVRP packets will be
forwarded transparently. This object affects all GVRP
Applicant and Registrar state machines. A transition
from inactive(2) to active(1) will cause a reset of all
GVRP state machines on all ports and zeroing of all
related counters.
Parsed from file ibm8275-2xx.mib.txt
Company: ibm
Module: IBM8275-2XX-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
sw2VlanGvrpStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The administrative status requested by management for GVRP. The value active(1) indicates that GVRP should be enabled on this device, on all ports for which it has not been specifically disabled. When inactive(2), GVRP is disabled on all ports and all GVRP packets will be forwarded transparently. This object affects all GVRP Applicant and Registrar state machines. A transition from inactive(2) to active(1) will cause a reset of all GVRP state machines on all ports and zeroing of all related counters." ::= { sw2VlanCfg 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.156.1.2.6.0 | sw2VlanGvrpStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.156.1.2.1 | sw2MgmtRestartVlanId | 1 | 1 | Specify the VLAN Id to which the network interface 1 defined in ifTable is dedicated. When the system restart, this object takes… |
| 1.3.6.1.4.1.2.6.156.1.2.2 | sw2MgmtCurrentVlanId | 1 | 1 | Specify the VLAN Id to which the network interface 1 defined in ifTable is dedicated. See sw2MgmtRestartVlanId for detail. |
| 1.3.6.1.4.1.2.6.156.1.2.3 | sw2MaxVlan | 1 | 1 | Maximum number of Vlans that can be configured within this switch . 802.1Q defines VLAN ID 0..4095 (only 1..4094 can be configur… |
| 1.3.6.1.4.1.2.6.156.1.2.4 | sw2VlanTable | 1 | 6 | A list of vlan groups that exist within this switch. |
| 1.3.6.1.4.1.2.6.156.1.2.5 | sw2StaticVlanRegisterTable | 1 | 4 | A list of vlan groups and the membership/registration control within this switch. This table consists only static vlans. |
| 1.3.6.1.4.1.2.6.156.1.2.7 | sw2VlanGvrpJoinTime | 1 | 1 | default 200, in centi-second |
| 1.3.6.1.4.1.2.6.156.1.2.8 | sw2VlanGvrpLeaveTime | 1 | 1 | default 60, in centi-second |
| 1.3.6.1.4.1.2.6.156.1.2.9 | sw2VlanGvrpLeaveAllTime | 1 | 1 | default 1000, in centi-second |