The hardware state of the port:
1 - Unknown port hardware state.
2 - OSA has detected a loss of signal on the link.
(A likely cause of this condition is an improperly
installed or missing cable connection on the port).
For OSA-Express ATM, this condition can also be
caused by registration failure.
3 - Port is disabled. The reason for the port being
disabled is set in object
ibmMvsOsaExpEthPortDisabledStatus.
4 - Port is enabled.
Parsed from file mvstcpip.mi2.txt
Company: None
Module: IBMTCPIPMVS-MIB
The hardware state of the port:
1 - Unknown port hardware state.
2 - OSA has detected a loss of signal on the link.
(A likely cause of this condition is an improperly
installed or missing cable connection on the port).
For OSA-Express ATM, this condition can also be
caused by registration failure.
3 - Port is disabled. The reason for the port being
disabled is set in object
ibmMvsOsaExpEthPortDisabledStatus.
4 - Port is enabled.
Parsed from file IBMTCPIPMVS-MIB.mib
Module: IBMTCPIPMVS-MIB
Vendor: IBM
Module: IBMTCPIPMVS-MIB
[Automatically extracted from oidview.com]
ibmMvsOsaExpEthPortHardwareState OBJECT-TYPE SYNTAX INTEGER { unknown(1), linkFailure(2), disabled(3), enabled(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware state of the port: 1 - Unknown port hardware state. 2 - OSA has detected a loss of signal on the link. (A likely cause of this condition is an improperly installed or missing cable connection on the port). For OSA-Express ATM, this condition can also be caused by registration failure. 3 - Port is disabled. The reason for the port being disabled is set in object ibmMvsOsaExpEthPortDisabledStatus. 4 - Port is enabled." ::= { osaexpEthPortEntry 3 }
ibmMvsOsaExpEthPortHardwareState OBJECT-TYPE SYNTAX INTEGER { unknown(1), linkFailure(2), disabled(3), enabled(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware state of the port: 1 - Unknown port hardware state. 2 - OSA has detected a loss of signal on the link. (A likely cause of this condition is an improperly installed or missing cable connection on the port). For OSA-Express ATM, this condition can also be caused by registration failure. 3 - Port is disabled. The reason for the port being disabled is set in object ibmMvsOsaExpEthPortDisabledStatus. 4 - Port is enabled." ::= { osaexpEthPortEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.1 | ibmMvsOsaExpEthPortNumber | 0 | 0 | Port number, starts at 0. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.2 | ibmMvsOsaExpEthPortType | 0 | 0 | The physical port type. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.4 | ibmMvsOsaExpEthPortServiceMode | 0 | 0 | None |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.5 | ibmMvsOsaExpEthPortDisabledStatus | 0 | 0 | When the value of ibmMvsOsaExpEthPortHardwareState is disabled(3), this object explains the reason for the disabled state. The v… |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.6 | ibmMvsOsaExpEthPortConfigName | 0 | 0 | Configuration name. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.7 | ibmMvsOsaExpEthPortConfigSpeed | 0 | 0 | The configured port speed. For OSA-Express Gigabit Ethernet adapters the port speed can not be configured so the value of this o… |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.8 | ibmMvsOsaExpEthPortActiveSpeed | 0 | 0 | The actual port speed. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.9 | ibmMvsOsaExpEthPortMacAddrActive | 0 | 0 | A 6 byte OCTET STRING which contains the current MAC address in use on the adapter. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.10 | ibmMvsOsaExpEthPortMacAddrBurntIn | 0 | 0 | A 6 byte OCTET STRING which contains the adapter's burned in MAC address. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.11 | ibmMvsOsaExpEthPortUserData | 0 | 0 | Configured port description. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.12 | ibmMvsOsaExpEthPortOutPackets | 0 | 0 | The count of the total number of packets transmitted from this port. A CHPID reset will cause this value to be reset to zero. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.13 | ibmMvsOsaExpEthPortInPackets | 0 | 0 | The count of the total number of packets received by this port. A CHPID reset will cause this value to be reset to zero. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.14 | ibmMvsOsaExpEthPortInGroupFrames | 0 | 0 | The count of the total number of group frames received by this port. A CHPID reset will cause this value to be reset to zero. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.15 | ibmMvsOsaExpEthPortInBroadcastFrames | 0 | 0 | The count of the total number of broadcast frames received by this port. A CHPID reset will cause this value to be reset to zero. |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.16 | ibmMvsOsaExpEthPortName | 0 | 0 | Specifies the Port Name which must also be entered at the connection manager on the host and the application. Port Name is specif… |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.17 | ibmMvsOsaExpEthPortInUnknownIPFrames | 0 | 0 | The count of the total number of packets that were discarded because they did not have a matching IP address and there was no pri… |
| 1.3.6.1.4.1.2.6.19.2.2.10.3.1.18 | ibmMvsOsaExpEthPortGroupMacAddrs | 0 | 0 | This field contains the active Group Addresses. An individual Group Address is 6 bytes long. Therefore, this field is actually 32… |