aixAgentPollInterval OBJECT-TYPE
SYNTAX Integer32(6..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The poll interval(in seconds) used by the agent. The default
value is zero. This value is used to define the minimum time
interval during which the subagent must update an object\s
value, check if any events occurred and send a trap
when an event occurs. If the value is zero, the polling
depends on each seperate configuration variable such as
aixFsPollInterval, aixVgPollInterval, etc. if it is
not zero, The value can not be less than 5 seconds. If it is
set to 1, 2, 3, or 4, the agent automatically sets the poll
interval to 5.
aixAgentPollInterval works together with the other variables
such as aixFsPollInterval, aixCPUPollInterval,
aixVgPollInterval, aixPagePollInterval, aixLFPollInterval
to decide the final polling interval of each group.
In /etc/aixmibd.conf file, this variable is corresponding to
pollInterval. Originally, it is SYNTAX Integer32(0,6..2147483647),
but IT Director MIB compiler does not accept this and it is
changed to this. "
View at oid-info.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.191.1.1.1 | aixAgentAction | 0 | 0 | aixAgentAction OBJECT-TYPE SYNTAX INTEGER { reset(1), debugOn(2), debugOff(3), shutdown(4), running(5) } MAX-ACCESS read-write … |
| 1.3.6.1.4.1.2.6.191.1.1.2 | aixAgentCmdString | 0 | 0 | aixAgentCmdString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This string represents a r… |
| 1.3.6.1.4.1.2.6.191.1.1.3 | aixAgentExeCommand | 0 | 0 | aixAgentExeCommand OBJECT-TYPE SYNTAX INTEGER { trigger(1), default(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The … |
| 1.3.6.1.4.1.2.6.191.1.1.4 | aixAgentCmdResult | 0 | 0 | aixAgentCmdResult OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object stor… |
| 1.3.6.1.4.1.2.6.191.1.1.6 | aixPollEnable | 0 | 0 | aixPollEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or… |
| 1.3.6.1.4.1.2.6.191.1.1.7 | aixLastTrapMsg | 0 | 0 | aixLastTrapMsg OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object holds the most rec… |
| 1.3.6.1.4.1.2.6.191.1.1.8 | aixAgentCmdOutTable | 1 | 2 | aixAgentCmdOutTable OBJECT-TYPE SYNTAX SEQUENCE OF AixAgentCmdOutTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTIO… |
| 1.3.6.1.4.1.2.6.191.1.1.9 | aixFsPollInterval | 0 | 0 | aixFsPollInterval OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The polling int… |
| 1.3.6.1.4.1.2.6.191.1.1.10 | aixCPUPollInterval | 0 | 0 | aixCPUPollInterval OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The polling in… |
| 1.3.6.1.4.1.2.6.191.1.1.11 | aixVgPollInterval | 0 | 0 | aixVgPollInterval OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The polling int… |
| 1.3.6.1.4.1.2.6.191.1.1.12 | aixPagePollInterval | 0 | 0 | aixPagePollInterval OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The polling i… |
| 1.3.6.1.4.1.2.6.191.1.1.13 | aixLFPollInterval | 0 | 0 | aixLFPollInterval OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The polling int… |