An entry in the cylink Configuration table.
Parsed from file ibm6611.mib.txt
Company: None
Module: IBM6611-MIB
An entry in the cylink Configuration table.
Parsed from file IBM6611-MIB.mib
Module: IBM6611-MIB
Vendor: IBM
Module: IBM6611-MIB
[Automatically extracted from oidview.com]
cylinkConfigEntry OBJECT-TYPE SYNTAX CYLINKConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the cylink Configuration table." INDEX { cylinkConfigIndex } ::= { cylinkConfigTable 1 }
cylinkConfigEntry OBJECT-TYPE SYNTAX CYLINKConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the cylink Configuration table." INDEX { cylinkConfigIndex } ::= { cylinkConfigTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2.6.2.3.1.3.1.1 | cylinkConfigIndex | 0 | 0 | The index value which uniquely identifies the CSU to which this entry is applicable. The CSU identified by a particular value of t… |
1.3.6.1.4.1.2.6.2.3.1.3.1.2 | cylinkSerialNumber | 0 | 0 | The manufacturer's serial number of this CSU. |
1.3.6.1.4.1.2.6.2.3.1.3.1.3 | cylinkSoftwareVersion | 0 | 0 | The version number of the microcode running in the CSU. |
1.3.6.1.4.1.2.6.2.3.1.3.1.4 | cylinkDTEFraming | 0 | 0 | The DTE framing selected (D4, or ESF). Framing conversion is automatically performed at both ends if the DTE is D4 framed and th… |
1.3.6.1.4.1.2.6.2.3.1.3.1.5 | cylinkNetworkFraming | 0 | 0 | The network framing selected (D4, or ESF). Framing conversion is automatically performed at both ends if the DTE is D4 framed a… |
1.3.6.1.4.1.2.6.2.3.1.3.1.6 | cylinkDTEDS1Mode | 0 | 0 | The DTE DS-1 mode selected (B8ZS, or AMI). |
1.3.6.1.4.1.2.6.2.3.1.3.1.7 | cylinkNetworkDS1Mode | 0 | 0 | The network DS-1 mode selected (B8ZS, or AMI). |
1.3.6.1.4.1.2.6.2.3.1.3.1.8 | cylinkOnesResponsibility | 0 | 0 | The component selected for Ones Density Responsibility (DTE, or CSU. |
1.3.6.1.4.1.2.6.2.3.1.3.1.9 | cylinkOnesControl | 0 | 0 | The Ones Density Control selected (LSB 24, D4 FRM, or ESF DL). |
1.3.6.1.4.1.2.6.2.3.1.3.1.10 | cylinkZeroProtection | 0 | 0 | The Consecutive Zero Control selected (15, or 80). This determines the the maximum number of consecutive zeros allowed in the dat… |
1.3.6.1.4.1.2.6.2.3.1.3.1.11 | cylinkClockSource | 0 | 0 | The transmit clock source selected for NRZ DIUs (network, DTE, an external clock, or the CSU's internal clock). |
1.3.6.1.4.1.2.6.2.3.1.3.1.12 | cylinkClockFrequency | 0 | 0 | The external clock frequency selected (56 kHz, 256 kHz, 1.344 MHz, 1.544 MHz). |
1.3.6.1.4.1.2.6.2.3.1.3.1.13 | cylinkClockBackup | 0 | 0 | The transmit clock backup source selected for NRZ DIUs (network, DTE, an external clock, or the CSU's internal clock). |
1.3.6.1.4.1.2.6.2.3.1.3.1.14 | cylinkDIUFrequency | 0 | 0 | The DIU frequency selected for NRZ DIUs (767 kbps, 1.244 Mbps, 1.528 Mbps, 1.536 Mbps). |
1.3.6.1.4.1.2.6.2.3.1.3.1.15 | cylinkDIUTiming | 0 | 0 | The DIU transmit timing selected for NRZ DIUs (Send Timing, or Terminal Timing). |
1.3.6.1.4.1.2.6.2.3.1.3.1.16 | cylinkDialoutCapability | 0 | 0 | The DIU dial-out capability selected (polled, tone, or pulse). |
1.3.6.1.4.1.2.6.2.3.1.3.1.17 | cylinkDialoutHoldoff | 0 | 0 | The mininum time, in minutes, between successful CSU-to-NMS connections to report alarm conditions. |
1.3.6.1.4.1.2.6.2.3.1.3.1.18 | cylinkPrimaryPhone | 0 | 0 | The primary telephone number used by by the CSU to contact the NMS. |
1.3.6.1.4.1.2.6.2.3.1.3.1.19 | cylinkSecondaryPhone | 0 | 0 | The secondary telephone number used by by the CSU to contact the NMS. |
1.3.6.1.4.1.2.6.2.3.1.3.1.20 | cylinkAlarmRepeatTime | 0 | 0 | The interval, in minutes, that the CSU will insert duplicate messages in the alarm queue for persistant alarm conditions. |
1.3.6.1.4.1.2.6.2.3.1.3.1.21 | cylinkESThreshold | 0 | 0 | The threshold, in seconds, for the errored second value in the current 15-minute interval. |
1.3.6.1.4.1.2.6.2.3.1.3.1.22 | cylinkSecondaryContact | 0 | 0 | The state of the CSU secondary contact (open or closed). |