fwUpdateImageUri OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is a URI string specifies the protocol and various location parameters to be used by the switch to perform a get operation using any of the supported protocols TFTP, FTP, sFTP. SFTP and FTP are mandatory and TFTP is recommended to support various user update tools. The IOM must report the protocols supported for the level of executing firmware in the IOM capabilities field of the VPD EEPROM. In this context the CMM (or remote host) acts as the server and the IOM acts as the client. The format of this string is as follows:
<protocol>://<username>:<password>@<IP address or hostname:<port>/<path>/<filename>
An example of a URI for the firmware packet file would be:
ftp://USERID:[email protected]:30045/tmp/1308 application.img1
or
ftp://USERID:PASSW0RD@[fe80::290:27ff:fe29:6019]:30045/tmp/application.img
or
sftp://USERID:[email protected]:30045/...ion.img
or
sftp://USERID:PASSW0RD@[fe80::290:27ff:fe29:6019]:30045/tmp/application.img
where the FTP or sFTP protocol will be used for transferring the packet file, username is USERID, password is PASSW0RD, host IP address is either fe80::290:27ff:fe29:6019 or 192.168.0.2, port number is 30045, and /tmp is the full pathname to the packet file application.img.
Some protocols do not need the username, password, and the port number, so the minimum requirement for a fully qualified address would be:
<protocol>://<IP address or hostname>/<path</<filename>
An example of a fully qualified address for the firmware packet file can be:
tftp://192.168.0.2:2022/tmp/application.img.
Note: (1) the MM will set the URI to the IOM. This URI may point to a server that is internal to the chassis with an IP address/hostname or if the server is external to the chassis then a public IP address/ hostname. Therefore the IP address of the server may or may not be the MMs IP address. In addition when a public IP address/hostname is used the filename in the URI may point to the top level directory that contains many files that make up the firmware image and the IOM is responsible to accept or reject this operation and indicate this by utilizing the status OID."
View at oid-info.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.215.3.1.2.1 | firmwareImageCnt | 0 | 0 | firmwareImageCnt OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The I/O Module must indi… |
| 1.3.6.1.4.1.2.6.215.3.1.2.2 | firmwareImageNum | 0 | 0 | firmwareImageNum OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates th… |
| 1.3.6.1.4.1.2.6.215.3.1.2.3 | firmwareAction | 0 | 0 | firmwareAction OBJECT-TYPE SYNTAX INTEGER { unknown(0), get(1), rsvd2(2), rsvd3(3), rsvd4(4), rsvd5(5), rsvd6(6), rsvd7(7), rsv… |
| 1.3.6.1.4.1.2.6.215.3.1.2.4 | fwUpdateOperationStatus | 0 | 0 | fwUpdateOperationStatus OBJECT-TYPE SYNTAX INTEGER { noOperation(0), success(101), failure(201) } MAX-ACCESS read-only STATUS c… |
| 1.3.6.1.4.1.2.6.215.3.1.2.5 | firmwareServer | 0 | 0 | firmwareServer OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a string … |
| 1.3.6.1.4.1.2.6.215.3.1.2.6 | fwUpdateImageActivation | 0 | 0 | fwUpdateImageActivation OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This value indic… |
| 1.3.6.1.4.1.2.6.215.3.1.2.8 | fwUpdateImageSftpRsaKey | 0 | 0 | fwUpdateImageSftpRsaKey OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..1024)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Con… |