This variable controls the configuration of the
functions in the control point.
This attribute cannot be set in the 8285, when read,
on a 8285 functionsConfiguration is always equal to
dynamicRouting-LanEmulationServer.
When this attribute is set, the configuration of
the functions is saved in the non volatile memory
and the atm subsystem is automatically reset.
When dynamicRouting-noLanEmulationServer is set
the dynamic routing function is active. The selection
of the routes when a connection is established
will be automatic through the SSI ports.
The LAN emulation servers cannot be started if
functionsConfiguration is equal to
dynamicRouting-noLanEmulationServer.
When staticRouting-LanEmulationServer is set, no automatic
route selection accross the SSI ports will be performed
by the atm-subsystem.
The routing will be performed only through the
defined static routes.
The ports cannot be set with the atm access equal to SSI.
All the ports previously configured as SSI ports are
changed to UNI, when the atm-subsystem is restarts after
the change of functionsConfiguration into
staticRouting-LanEmulationServer.
dynamicRouting-LanEmulationServer cannot be set on an
8260.
Parsed from file atmmib21.mib.txt
Company: ibm
Module: ATM-SWITCHING-NODE-MIB
Vendor: IBM
Module: ATM-SWITCHING-NODE-MIB
[Automatically extracted from oidview.com]
functionsConfiguration OBJECT-TYPE SYNTAX INTEGER { dynamicRouting-noLanEmulationServer (1), staticRouting-LanEmulationServer (2), dynamicRouting-LanEmulationServer (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable controls the configuration of the functions in the control point. This attribute cannot be set in the 8285, when read, on a 8285 functionsConfiguration is always equal to dynamicRouting-LanEmulationServer. When this attribute is set, the configuration of the functions is saved in the non volatile memory and the atm subsystem is automatically reset. When dynamicRouting-noLanEmulationServer is set the dynamic routing function is active. The selection of the routes when a connection is established will be automatic through the SSI ports. The LAN emulation servers cannot be started if functionsConfiguration is equal to dynamicRouting-noLanEmulationServer. When staticRouting-LanEmulationServer is set, no automatic route selection accross the SSI ports will be performed by the atm-subsystem. The routing will be performed only through the defined static routes. The ports cannot be set with the atm access equal to SSI. All the ports previously configured as SSI ports are changed to UNI, when the atm-subsystem is restarts after the change of functionsConfiguration into staticRouting-LanEmulationServer. dynamicRouting-LanEmulationServer cannot be set on an 8260." ::= { base 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.33.1.1.8.0 | functionsConfiguration | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.33.1.1.1 | dateTime | 1 | 1 | The local date and time in the ATM agent. |
| 1.3.6.1.4.1.2.6.33.1.1.2 | lastChange | 1 | 1 | The date and time of the last major change detected: - date and time reset - agent IP address(es), subnet mask(s), default gatewa… |
| 1.3.6.1.4.1.2.6.33.1.1.3 | lock | 1 | 1 | The purpose of this variable is to protect the path between the hub and the network management station. When set to secure (1), i… |
| 1.3.6.1.4.1.2.6.33.1.1.4 | ipArpServerAtmAddress | 1 | 1 | The ATM address of the ARP server used when communicating with the switch agent using Classical IP over ATM (RFC 1577). |
| 1.3.6.1.4.1.2.6.33.1.1.6 | systemState | 1 | 1 | This variables indicates the currently active switch. When the active switch is in slots 9/10, switch-a is returned. When the act… |
| 1.3.6.1.4.1.2.6.33.1.1.7 | backupMode | 1 | 1 | This variable controls the way the active switch will be elected at the next reset of the atm subsystem, and controls also the re… |