Setting the basicSegmentIpAddr, basicSegmentNetMask,
basicSegmentGateway, and basicSegmentSlipAddr will not make
the system use these parameters immediately. Setting the
basicSegmentReset to reset(2) will cause the 8225 to use the
new values.
Parsed from file IBM8225.MIB.txt
Company: ibm
Module: IBM-8225-MIB
Vendor: IBM
Module: IBM-8225-MIB (IBM8225.MIB)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
basicSegmentReset OBJECT-TYPE SYNTAX INTEGER { notreset(1), reset(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting the basicSegmentIpAddr, basicSegmentNetMask, basicSegmentGateway, and basicSegmentSlipAddr will not make the system use these parameters immediately. Setting the basicSegmentReset to reset(2) will cause the 8225 to use the new values." ::= { basicSegmentEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.37.2.2.1.2.1.1 | basicSegmentIndex | 0 | 0 | Backplane bus number of the segment. |
| 1.3.6.1.4.1.2.6.37.2.2.1.2.1.2 | basicSegmentProtocol | 0 | 0 | For protocol stack definition : bit 0: IP protocol stack 0: disabled; 1: enabled bit 1: IPX protocol stack 0: disabled; 1: enable… |
| 1.3.6.1.4.1.2.6.37.2.2.1.2.1.3 | basicSegmentIpAddr | 0 | 0 | IP address of this segment. The corresponding definition in each segment of the network management module (NMM). Because the IBM … |
| 1.3.6.1.4.1.2.6.37.2.2.1.2.1.4 | basicSegmentNetMask | 0 | 0 | IP netmask of this segment. |
| 1.3.6.1.4.1.2.6.37.2.2.1.2.1.5 | basicSegmentGateway | 0 | 0 | Preferred gateway of this segment. |
| 1.3.6.1.4.1.2.6.37.2.2.1.2.1.6 | basicSegmentSlipAddr | 0 | 0 | SLIP address of this segment. The SLIP must reside in the same subnet as the basicSegmentIpAddress. |
| 1.3.6.1.4.1.2.6.37.2.2.1.2.1.8 | basicSegmentIpxFrame | 0 | 0 | Default IPX frame type of the system. Four types of IPX frame support. You can set this object within the values from ethernet802… |
| 1.3.6.1.4.1.2.6.37.2.2.1.2.1.9 | basicSegmentIntIpxNet | 0 | 0 | Internal IPX network of the segment. |
| 1.3.6.1.4.1.2.6.37.2.2.1.2.1.11 | basicSegmentName | 0 | 0 | Mnemonic name of the segment. |