Setting this object to inactive(1) disables the backup
port function for this backup port pair. Setting this object
to active(2) will disable the secondary port and enable the
primary port.
When the backup port pair is activated, the backup status of
this port pair is reflected as stand-by(3) or backup(4).
Value stand-by(3) indicates that the primary link is okay
and enabled. Value backup(4) means that the primary link has
failed and the secondary link has taken over. After the
secondary link has taken over, setting this object to
active(2) will attempt to recover the primary port and
disable the secondary port. Success here depends on the
ability to establish a good link on the primary port.
The values stand-by(3) and backup(4) are read-only.
Attempting to set this object to either of these two values
is not valid. The result 'snmpBadValue' will be returned.
Parsed from file IBM8225.MIB.txt
Company: ibm
Module: IBM-8225-MIB
Vendor: IBM
Module: IBM-8225-MIB (IBM8225.MIB)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
backupPortAction OBJECT-TYPE SYNTAX INTEGER { inactive(1), active(2), stand-by(3), backup(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to inactive(1) disables the backup port function for this backup port pair. Setting this object to active(2) will disable the secondary port and enable the primary port. When the backup port pair is activated, the backup status of this port pair is reflected as stand-by(3) or backup(4). Value stand-by(3) indicates that the primary link is okay and enabled. Value backup(4) means that the primary link has failed and the secondary link has taken over. After the secondary link has taken over, setting this object to active(2) will attempt to recover the primary port and disable the secondary port. Success here depends on the ability to establish a good link on the primary port. The values stand-by(3) and backup(4) are read-only. Attempting to set this object to either of these two values is not valid. The result 'snmpBadValue' will be returned." ::= { backupPortEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.37.2.2.3.2.1.1 | backupIndex | 0 | 0 | Backup table index. |
| 1.3.6.1.4.1.2.6.37.2.2.3.2.1.2 | backupPriPortGroup | 0 | 0 | Hub ID of the primary port. |
| 1.3.6.1.4.1.2.6.37.2.2.3.2.1.3 | backupPriPortPort | 0 | 0 | Port number of the primary port. Number 13 is the FEM port of this hub. |
| 1.3.6.1.4.1.2.6.37.2.2.3.2.1.4 | backupSecPortGroup | 0 | 0 | Hub ID of the secondary port |
| 1.3.6.1.4.1.2.6.37.2.2.3.2.1.5 | backupSecPortPort | 0 | 0 | Port number of the secondary port. Number 13 is the FEM port of this hub. |