The object specifies the number of an ipv6 advanced ACL rule.
If the number specified has been assigned to an ACL rule,
the new rule will overwrite the old one,
which is equal to editing the old rule.
If the number is not assigned, the system will define
a rule with the number and insert it to the place
corresponding to its number. If no number is specified,
the system will define a rule, assign a number to it and
add it into the ACL. It will be placed at the end of the
ACL when configuration sequence is adopted; otherwise,
it will be placed based on the 'Depth-first' principle.
When ACL rules are following the 'Depth-first' principle,
the number of an ACL rule must be given 0 ,but it will be assigned
automatically;otherwise,this rule will not be created.
Parsed from file HUAWEI-ACL-MIB.mib.txt
Company: huawei
Module: HUAWEI-ACL-MIB
hwAclIpv6AdvancedSubitem OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the number of an ipv6 advanced ACL rule. If the number specified has been assigned to an ACL rule, the new rule will overwrite the old one, which is equal to editing the old rule. If the number is not assigned, the system will define a rule with the number and insert it to the place corresponding to its number. If no number is specified, the system will define a rule, assign a number to it and add it into the ACL. It will be placed at the end of the ACL when configuration sequence is adopted; otherwise, it will be placed based on the 'Depth-first' principle. When ACL rules are following the 'Depth-first' principle, the number of an ACL rule must be given 0 ,but it will be assigned automatically;otherwise,this rule will not be created." ::= { hwAclIpv6AdvancedRuleEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.1.1.13.1.1 | hwAclIpv6AdvancedAclNum | 0 | 0 | The index of ipv6 advanced acl table. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.3 | hwAclIpv6AdvancedAct | 0 | 0 | The object indicates the action of an ipv6 advanced acl rule. 'deny' means discarding the packets that meet the condition, 'permi… |
| 1.3.6.1.4.1.2011.5.1.1.13.1.4 | hwAclIpv6AdvancedProtocol | 0 | 0 | The object indicates the protocol type of the rule. It specifies the protocol type over IP.The number of IPv6 protocol is 0. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.5 | hwAclIpv6AdvancedSrcIp | 0 | 0 | The object indicates the source IPv6-address of an ipv6 advanced acl rule. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.6 | hwAclIpv6AdvancedSrcPrefix | 0 | 0 | The object indicates the source IPv6-address prefix length of an ipv6 advanced acl rule. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.7 | hwAclIpv6AdvancedSrcOp | 0 | 0 | The object indicates the source Port operation symbol of an ipv6 advanced acl rule. It compares the port operators of source add… |
| 1.3.6.1.4.1.2011.5.1.1.13.1.8 | hwAclIpv6AdvancedSrcPort1 | 0 | 0 | The object indicates the fourth layer sourec port 1. It specifies the source port information of UDP or TCP packets. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.9 | hwAclIpv6AdvancedSrcPort2 | 0 | 0 | The object indicates the fourth layer source port2. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.10 | hwAclIpv6AdvancedDestIp | 0 | 0 | The object indicates the destination IPv6-address of an ipv6 advanced acl rule. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.11 | hwAclIpv6AdvancedDestPrefix | 0 | 0 | The object indicates the destination IPv6-address prefix length of an ipv6 advanced acl rule. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.12 | hwAclIpv6AdvancedDestOp | 0 | 0 | The object indicates the destination Port operation symbol of an ipv6 advanced acl group. It compares the port operators of dest… |
| 1.3.6.1.4.1.2011.5.1.1.13.1.13 | hwAclIpv6AdvancedDestPort1 | 0 | 0 | The object indicates the fourth layer destination port1. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.14 | hwAclIpv6AdvancedDestPort2 | 0 | 0 | The object indicates the fourth layer destination port2. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.15 | hwAclIpv6AdvancedPrecedence | 0 | 0 | The object indicates the value of IPv6-packet's precedence, It filters packets according to precedence field. The invalid value i… |
| 1.3.6.1.4.1.2011.5.1.1.13.1.16 | hwAclIpv6AdvancedTos | 0 | 0 | The object indicates the value of IPv6-packet's TOS, It filters packets according to type of service. The invalid value is 255. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.17 | hwAclIpv6AdvancedDscp | 0 | 0 | The object indicates the value of frame.The invalid value is 255. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.18 | hwAclIpv6AdvancedEstablish | 0 | 0 | The object indicates whether or not establishing. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.19 | hwAclIpv6AdvancedTimeRangeIndex | 0 | 0 | The object indicates the time range of an ipv6 advanced acl rule. When the current time is in the time range, the rule is valid.… |
| 1.3.6.1.4.1.2011.5.1.1.13.1.20 | hwAclIpv6AdvancedIcmpType | 0 | 0 | The object indicates the type of ICMPv6 packet. It filters ICMP packets according to the ICMPv6 message type. The invalid value i… |
| 1.3.6.1.4.1.2011.5.1.1.13.1.21 | hwAclIpv6AdvancedIcmpCode | 0 | 0 | The object indicates the code of ICMPv6 packet. It filters ICMPv6 packets according to the message code. The invalid value is 655… |
| 1.3.6.1.4.1.2011.5.1.1.13.1.22 | hwAclIpv6AdvancedFragment | 0 | 0 | The object indicates the type of the packet. 1: fragment, indicating that the packet is a fragment 255: none, invalid value This o… |
| 1.3.6.1.4.1.2011.5.1.1.13.1.23 | hwAclIpv6AdvancedLog | 0 | 0 | The object indicates whether to log the matched packets. The log contents include sequence number of ACL rule, packets passed or … |
| 1.3.6.1.4.1.2011.5.1.1.13.1.24 | hwAclIpv6AdvancedEnable | 0 | 0 | The object indicates whether the rule is valid or invalid. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.25 | hwAclIpv6AdvancedCount | 0 | 0 | The object indicates the statistics of matched packets by the rule. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.26 | hwAclIpv6AdvancedVrfName | 0 | 0 | The object indicates the VRF name of this rule, It specifies the VPN-instance to which the packet belongs. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.27 | hwAclIpv6AdvancedRowStatus | 0 | 0 | RowStatus, Now support three state:CreateAndGo,Active,Destroy. |
| 1.3.6.1.4.1.2011.5.1.1.13.1.28 | hwAclIpv6AdvancedDescription | 0 | 0 | The object indicates the description of this IPv6 advanced rule. The object describes the usage of an IPv6 ACL with a word or a … |