The object specifies the number of an User ACL rule.
If the number specified has been assigned to an ACL rule,
the new rule will overwrite the old one,
which is equal to editing the old rule.
If the number is not assigned, the system will define
a rule with the number and insert it to the place
corresponding to its number. If no number is specified,
the system will define a rule, assign a number to it and
add it into the ACL. It will be placed at the end of the
ACL when configuration sequence is adopted; otherwise,
it will be placed based on the 'Depth-first' principle
Parsed from file HUAWEI-ACL-MIB.mib.txt
Company: huawei
Module: HUAWEI-ACL-MIB
Vendor: Huawei
Module: HUAWEI-ACL-MIB (HUAWEI-ACL-MIB.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
(
0..255 )
Automatically extracted from www.mibdepot.com
hwAclUserSubitem OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the number of an User ACL rule. If the number specified has been assigned to an ACL rule, the new rule will overwrite the old one, which is equal to editing the old rule. If the number is not assigned, the system will define a rule with the number and insert it to the place corresponding to its number. If no number is specified, the system will define a rule, assign a number to it and add it into the ACL. It will be placed at the end of the ACL when configuration sequence is adopted; otherwise, it will be placed based on the 'Depth-first' principle" ::= { hwAclUserRuleEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.1.1.7.1.1 | hwAclNameStandardAclName, hwAclUserAclNum | 0 | 0 | The index of user acl table. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.3 | hwAclNameStandardAct, hwAclUserAct | 0 | 0 | The object indicates the action of an User acl rule. 'deny' means discarding the packets that meet the condition, 'permit' means … |
| 1.3.6.1.4.1.2011.5.1.1.7.1.4 | hwAclNameStandardSrcIp, hwAclUserProtocol | 0 | 0 | The object indicates the protocol type of the rule. It specifies the protocol type over IP.The number of IP protocol is 0. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.5 | hwAclNameStandardSrcWild, hwAclUserSrcIp | 0 | 0 | The object indicates the source IP-address of an User acl rule. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.6 | hwAclNameStandardSrcAny, hwAclUserSrcWild | 0 | 0 | The object indicates the source IP-address wild of an User acl rule. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.7 | hwAclNameStandardFragments, hwAclUserSrcOp | 0 | 0 | The object indicates the source Port operation symbol of an User acl rule. It compares the port operators of source address. 'lt'… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.8 | hwAclNameStandardTimeRangeName, hwAclUserSrcPort1 | 0 | 0 | The object indicates the fourth layer sourec port 1. It specifies the source port information of UDP or TCP packets. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.9 | hwAclNameStandardEnable, hwAclUserSrcPort2 | 0 | 0 | The object indicates the fourth layer source port2. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.10 | hwAclNameStandardCount, hwAclUserDestIp | 0 | 0 | The object indicates the destination IP-address of an User acl rule. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.11 | hwAclNameStandardCountClear, hwAclUserDestWild | 0 | 0 | The object indicates the destination IP-address wild of an User acl rule. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.12 | hwAclNameStandardRowStatus, hwAclUserDestOp | 0 | 0 | The object indicates the destination Port operation symbol of an User acl group. It compares the port operators of destination a… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.13 | hwAclUserDestPort1 | 0 | 0 | The object indicates the fourth layer destination port1. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.14 | hwAclUserDestPort2 | 0 | 0 | The object indicates the fourth layer destination port2. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.15 | hwAclUserPrecedence | 0 | 0 | The object indicates the value of IP-packet's precedence, It filters packets according to precedence field.The invalid value is 2… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.16 | hwAclUserTos | 0 | 0 | The object indicates the value of IP-packet's TOS, It filters packets according to type of service.The invalid value is 255. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.17 | hwAclUserDscp | 0 | 0 | The object indicates the value of frame.The invalid value is 255. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.18 | hwAclUserEstablish | 0 | 0 | The object indicates whether or not establishing. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.19 | hwAclUserTimeRangeIndex | 0 | 0 | The object indicates the time range of an User acl rule. When the current time is in the time range, the rule is valid. Zero valu… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.20 | hwAclUserIcmpType | 0 | 0 | The object indicates the type of ICMP packet. It filters ICMP packets according to the ICMP message type. The invalid value is 65… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.21 | hwAclUserIcmpCode | 0 | 0 | The object indicates the code of ICMP packet. It filters ICMP packets according to the message code. The invalid value is 65535. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.22 | hwAclUserFragments | 0 | 0 | The object indicates whether or not matching fragmented packet, It specifies that this rule is only valid for the non-first fragm… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.23 | hwAclUserLog | 0 | 0 | The object indicates whether to log the matched packets. The log contents include sequence number of ACL rule, packets passed or … |
| 1.3.6.1.4.1.2011.5.1.1.7.1.24 | hwAclUserEnable | 0 | 0 | The object indicates whether the rule is valid or invalid. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.25 | hwAclUserCount | 0 | 0 | The object indicates the statistics of matched packets by the rule. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.26 | hwAclUserVrfName | 0 | 0 | The object indicates the VRF name of this rule, It specifies the VPN-instance to which the packet belongs. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.27 | hwAclUserSrcUserGroupName | 0 | 0 | The object indicates the source user group name of this rule. if modetype source is user, null sting means any user |
| 1.3.6.1.4.1.2011.5.1.1.7.1.28 | hwAclUserDestUserGroupName | 0 | 0 | The object indicates the destination user group name of this rule. if modetype destination is user, null sting means any user |
| 1.3.6.1.4.1.2011.5.1.1.7.1.29 | hwAclUserSrcModeType | 0 | 0 | The object indicates ACL's mode type, Now support four state 0 Any match rule from any user group or any ip subnet, 1 NetAn… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.30 | hwAclUserDestModeType | 0 | 0 | The object indicates ACL's mode type, Now support four state 0 Any match rule from any user group or any ip subnet, 1 NetAn… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.31 | hwAclUserRowStatus | 0 | 0 | RowStatus, Now support three state:CreateAndGo,Active,Destroy. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.32 | hwAclUserTcpSyncFlag | 0 | 0 | The object indicates the code of TCP Sync flag(0~63), The invalid value is -1. |