This object contains the next appropriate value to
be used for mplsOutSegmentIndex when creating
entries in the mplsOutSegmentTable. If the number
of unassigned entries is exhausted, this object will
take on the value of 0. To obtain the
mplsOutSegmentIndex value for a new entry, the
manager must first issue a management protocol
retrieval operation to obtain the current value of
this object. The agent should modify the value to
reflect the next unassigned index after each
retrieval operation. After a manager retrieves a
value the agent will determine through its local
policy when this index value will be made available
for reuse.
Parsed from file huawei-mpls-lsr.mib.txt
Company: huawei
Module: HUAWEI-MPLS-LSR-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
mplsOutSegmentIndexNext OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the next appropriate value to be used for mplsOutSegmentIndex when creating entries in the mplsOutSegmentTable. If the number of unassigned entries is exhausted, this object will take on the value of 0. To obtain the mplsOutSegmentIndex value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { mplsLsrObjects 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.12.1.1.5.0 | mplsOutSegmentIndexNext | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.12.1.1.1 | mplsInterfaceConfTable | 1 | 10 | mplsInterfaceConftable |
| 1.3.6.1.4.1.2011.5.12.1.1.2 | mplsInterfacePerfTable | 1 | 5 | mplsInterfacePerftable |
| 1.3.6.1.4.1.2011.5.12.1.1.3 | mplsInSegmentTable | 1 | 10 | This table contains a collection of incoming segments to an LSR. |
| 1.3.6.1.4.1.2011.5.12.1.1.4 | mplsInSegmentPerfTable | 1 | 7 | mplsInSegmentPerftable |
| 1.3.6.1.4.1.2011.5.12.1.1.6 | mplsOutSegmentTable | 1 | 13 | This table contains a representation of the outgoing segments from an LSR. |
| 1.3.6.1.4.1.2011.5.12.1.1.7 | mplsOutSegmentPerfTable | 1 | 7 | mplsOutSegmentPerftable |
| 1.3.6.1.4.1.2011.5.12.1.1.8 | mplsXCIndexNext | 1 | 1 | This object contains an appropriate value to be used for mplsXCIndex when creating entries in the mplsXCTable. The value 0 indic… |
| 1.3.6.1.4.1.2011.5.12.1.1.9 | mplsXCTable | 1 | 10 | This table specifies information for switching between LSP segments. It supports point-to-point, point-to-multipoint and multipo… |
| 1.3.6.1.4.1.2011.5.12.1.1.10 | mplsMaxLabelStackDepth | 1 | 1 | The maximum stack depth supported by this LSR. |
| 1.3.6.1.4.1.2011.5.12.1.1.11 | mplsLabelStackIndexNext | 1 | 1 | This object contains an appropriate value to be used for mplsLabelStackIndex when creating entries in the mplsLabelStackTable. T… |
| 1.3.6.1.4.1.2011.5.12.1.1.12 | mplsLabelStackTable | 1 | 6 | This table specifies the label stack to be pushed onto a packet, beneath the top label. Entries into this table are referred to … |
| 1.3.6.1.4.1.2011.5.12.1.1.13 | mplsTrafficParamIndexNext | 1 | 1 | This object contains an appropriate value which will be used for mplsTrafficParamIndex when creating entries in the mplsTrafficPa… |
| 1.3.6.1.4.1.2011.5.12.1.1.14 | mplsTrafficParamTable | 1 | 7 | This table specifies the Traffic Parameter objects for in and out-segments. |
| 1.3.6.1.4.1.2011.5.12.1.1.15 | mplsXCTrapEnable | 1 | 1 | If this object is true, then it enables the generation of mplsXCUp and mplsXCDown traps, otherwise these traps are not emitted. |