The false packets statistic information table.
Parsed from file HUAWEI-DHCP-SNOOPING-MIB.mib.txt
Company: huawei
Module: HUAWEI-DHCP-SNOOPING-MIB
hwDhcpSnpFalsePktStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF HWDhcpSnpFalsePktStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The false packets statistic information table." ::= { hwDhcpSnpObjects 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.112.1.15.1 | hwDhcpSnpFalsePktStatisticEntry | 11 | 11 | An entry in the snooping false packets statistic information table. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.112.1.1 | hwDhcpSnpGlobal | 0 | 0 | The Global Snooping. Enable this before you want to enable the port,vlan,other interfaces snooping,default is disable. |
| 1.3.6.1.4.1.2011.5.25.112.1.2 | hwDhcpPktRateCheck | 0 | 0 | Whether to check the rate of DHCP packets received,default is disabling. |
| 1.3.6.1.4.1.2011.5.25.112.1.3 | hwDhcpPktRate | 0 | 0 | The area of Dhcp packets received rate,default is 100. |
| 1.3.6.1.4.1.2011.5.25.112.1.4 | hwDhcpPktRateAlarmThreshold | 0 | 0 | The threshold of the DHCP packets rate Alarm. When the actual rate beyond the maximum rate configured and reach this threshold o… |
| 1.3.6.1.4.1.2011.5.25.112.1.5 | hwDhcpPktRateAlarmEnable | 0 | 0 | Whether to send the DHCP packets rate alarm when the actual rate beyond the maximum rate configured and reach the rate threshold… |
| 1.3.6.1.4.1.2011.5.25.112.1.6 | hwDhcpSnpBindTblNomatchedArpGlobalAction | 0 | 0 | How to deal with the ARP packets that do not match the DHCP snooping bind table in global view,default is forward. |
| 1.3.6.1.4.1.2011.5.25.112.1.7 | hwDhcpSnpBindTblNomatchedIpGlobalAction | 0 | 0 | How to deal with the Ip packets that do not match the DHCP snooping bind table in global view,default is forward. |
| 1.3.6.1.4.1.2011.5.25.112.1.8 | hwDhcpSnpBindTblAutosaveFilename | 0 | 0 | Auto save file name. Make sure the disk name have been given, and the file must be named with '.tbl' postfixally. |
| 1.3.6.1.4.1.2011.5.25.112.1.9 | hwDhcpSnpBindTblAutosave | 0 | 0 | Whether to save snooping bind table,default is disabling . |
| 1.3.6.1.4.1.2011.5.25.112.1.10 | hwDhcpSnpGlobalThreshold | 0 | 0 | DHCP snooping global threshold,default is disabling. |
| 1.3.6.1.4.1.2011.5.25.112.1.11 | hwDhcpPktRateDiscardNum | 0 | 0 | DHCP packets that discarded for the rate limit. |
| 1.3.6.1.4.1.2011.5.25.112.1.13 | hwDhcpSnpCfgTable | 1 | 36 | The DHCP snooping configuration table. |
| 1.3.6.1.4.1.2011.5.25.112.1.14 | hwDhcpSnpBindTable | 1 | 16 | The snooping bind table.You must give out (1)one of the interface index, VLANID and VSIID at least (2)the Mac-address,ip-address,… |
| 1.3.6.1.4.1.2011.5.25.112.1.16 | hwDhcpSnpCarCfgTable | 1 | 9 | The DHCP Snooping CAR table for control of the traffic. The CAR is based on IP and Mac, but configured with interface and VLAN. |
| 1.3.6.1.4.1.2011.5.25.112.1.17 | hwDhcpSnpGlobalOption82Format | 0 | 0 | The format type of Option82,default is hex. |
| 1.3.6.1.4.1.2011.5.25.112.1.18 | hwDhcpSnpGlobalOption82PacketFormat | 0 | 0 | The format mode of Option82,default is extended. |
| 1.3.6.1.4.1.2011.5.25.112.1.19 | hwDhcpSnpGlobalOption82RemoteId | 0 | 0 | Option82 global remote ID. |
| 1.3.6.1.4.1.2011.5.25.112.1.20 | hwDhcpSnpGlobalOption82RemoteIdSysName | 0 | 0 | Config Option82 global remote ID as system name,default is disabled. |
| 1.3.6.1.4.1.2011.5.25.112.1.21 | hwDhcpSnpGlobalOption82CircuitId | 0 | 0 | Option82 global circuit ID. |
| 1.3.6.1.4.1.2011.5.25.112.1.22 | hwDhcpSnpGlobalOption82PktFormatTable | 1 | 4 | A table about the packet format of option82. |