hwLspTrap OBJECT IDENTIFIER ::= { hwMplsExtendTrap 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.121.2.1.1 | hwMplsStaticLspUp | 0 | 0 | This notification indicates that the status of referred static LSP changes to Up. |
1.3.6.1.4.1.2011.5.25.121.2.1.2 | hwMplsStaticLspDown | 0 | 0 | This notification indicates that the status of referred static LSP changes to Down. |
1.3.6.1.4.1.2011.5.25.121.2.1.3 | hwMplsStaticCRLspUp | 0 | 0 | This notification indicates that the status of referred static CR-LSP changes to Up. |
1.3.6.1.4.1.2011.5.25.121.2.1.4 | hwMplsStaticCRLspDown | 0 | 0 | This notification indicates that the status of referred static CR-LSP changes to Down. |
1.3.6.1.4.1.2011.5.25.121.2.1.5 | hwMplsTeFrrProtAval | 0 | 0 | This notification indicates that the primary tunnel is bound to bypass tunnel. |
1.3.6.1.4.1.2011.5.25.121.2.1.6 | hwMplsTeFrrProtNotAval | 0 | 0 | This notification indicates that the primary tunnel is unbound to bypass tunnel. |
1.3.6.1.4.1.2011.5.25.121.2.1.7 | hwMplsTeFrrSwitch | 0 | 0 | This notification indicates that the primary tunnel is switches to the bypass tunnel. |
1.3.6.1.4.1.2011.5.25.121.2.1.8 | hwMplsTeFrrResume | 0 | 0 | This notification indicates that the primary tunnel is switched back from the bypass tunnel. |
1.3.6.1.4.1.2011.5.25.121.2.1.9 | hwMplsTunnelHSBSwitch | 0 | 0 | This notification indicates that the data is switched from the primary CR-LSP to the HSB CR-LSP. |
1.3.6.1.4.1.2011.5.25.121.2.1.10 | hwMplsTunnelHSBResume | 0 | 0 | This notification indicates that the data is switched from the HSB CR-LSP to the primary CR-LSP. |
1.3.6.1.4.1.2011.5.25.121.2.1.11 | hwMplsTunnelOBSwitch | 0 | 0 | This notification indicates that the primary CR-LSP is down and the Ordinary backup CR-LSP is up. |
1.3.6.1.4.1.2011.5.25.121.2.1.12 | hwMplsTunnelOBResume | 0 | 0 | This notification indicates that the data is switched from the Ordinary backup CR-LSP to the primary CR-LSP. |
1.3.6.1.4.1.2011.5.25.121.2.1.13 | hwMplsTunnelUp | 0 | 0 | The hwMplsTunnelUp trap indicates that the staus of the tunnel changes into Up. |
1.3.6.1.4.1.2011.5.25.121.2.1.14 | hwMplsTunnelDown | 0 | 0 | The hwMplsTunnelDown trap indicates that the staus of the tunnel changes into Down. |
1.3.6.1.4.1.2011.5.25.121.2.1.15 | hwMplsTunnelChangeBw | 0 | 0 | This notification indicates that the bandwidth of the tunnel is changed. |
1.3.6.1.4.1.2011.5.25.121.2.1.16 | hwMplsTunnelTpOamLossSD | 0 | 0 | This object indicates that the loss ratio of the packets carried by the tunnel exceeded the first threshold. |
1.3.6.1.4.1.2011.5.25.121.2.1.17 | hwMplsOamSDRecovery | 0 | 0 | This object indicates that the loss ratio of the packets carried by the tunnel dropped below the first threshold. |
1.3.6.1.4.1.2011.5.25.121.2.1.18 | hwMplsOamLoss | 0 | 0 | This object indicates that TP OAM detected tunnel connectivity faults. |
1.3.6.1.4.1.2011.5.25.121.2.1.19 | hwMplsOamLossRecovery | 0 | 0 | This object indicates that TP OAM did not detect tunnel connectivity faults. |
1.3.6.1.4.1.2011.5.25.121.2.1.20 | hwMplsOamAis | 0 | 0 | This object indicates that TP OAM detected an alarm indication signal. |
1.3.6.1.4.1.2011.5.25.121.2.1.21 | hwMplsOamAisRecovery | 0 | 0 | This object indicates that TP OAM no longer detected alarm indication signals. |
1.3.6.1.4.1.2011.5.25.121.2.1.22 | hwMplsOamRdi | 0 | 0 | This object indicates that TP OAM detected remote defects. |
1.3.6.1.4.1.2011.5.25.121.2.1.23 | hwMplsOamRdiRecovery | 0 | 0 | This object indicates that the remote defects detected by TP OAM were removed. |
1.3.6.1.4.1.2011.5.25.121.2.1.24 | hwMplsOamMeg | 0 | 0 | This object indicates that the names configured on the two ends of the tunnel are inconsistent. |
1.3.6.1.4.1.2011.5.25.121.2.1.25 | hwMplsOamMegRecovery | 0 | 0 | This object indicates that the names configured on the two ends of the tunnel now are consistent. |
1.3.6.1.4.1.2011.5.25.121.2.1.26 | hwMplsOamMep | 0 | 0 | This object indicates that the MEP-IDs configured on the two ends of the tunnel are inconsistent. |
1.3.6.1.4.1.2011.5.25.121.2.1.27 | hwMplsOamMepRecovery | 0 | 0 | This object indicates that the MEP-IDs configured on the two ends of the tunnel now are consistent. |
1.3.6.1.4.1.2011.5.25.121.2.1.28 | hwMplsOamSF | 0 | 0 | This object indicates that the loss ratio of the packets carried by the tunnel exceeded the second threshold in the local link. |
1.3.6.1.4.1.2011.5.25.121.2.1.29 | hwMplsOamSFRecovery | 0 | 0 | This object indicates that the loss ratio of the packets carried by the tunnel dropped below the second threshold in the local … |
1.3.6.1.4.1.2011.5.25.121.2.1.30 | hwMplsOamPeriod | 0 | 0 | This object indicates that the TP OAM detection periods on the two ends of the tunnel are inconsistent. |
1.3.6.1.4.1.2011.5.25.121.2.1.31 | hwMplsOamPeriodRecovery | 0 | 0 | This object indicates that the TP OAM detection periods on the two ends of the tunnel now are consistent. |
1.3.6.1.4.1.2011.5.25.121.2.1.32 | hwMplsOamLck | 0 | 0 | This object indicates that TP OAM detected the remote end of the tunnel has been locked. |
1.3.6.1.4.1.2011.5.25.121.2.1.33 | hwMplsOamLckRecovery | 0 | 0 | This object indicates that TP OAM detected the remote end of the tunnel has not been locked. |
1.3.6.1.4.1.2011.5.25.121.2.1.34 | hwMplsOamExcess | 0 | 0 | This object indicates that MPLS OAM detected the tunnel received excess alarm. |
1.3.6.1.4.1.2011.5.25.121.2.1.35 | hwMplsOamExcessRecovery | 0 | 0 | This object indicates that MPLS OAM detected the tunnel received excess alarm end. |
1.3.6.1.4.1.2011.5.25.121.2.1.36 | hwMplsOamMisMatch | 0 | 0 | This object indicates that MPLS OAM detected the tunnel received MisMatch alarm. |
1.3.6.1.4.1.2011.5.25.121.2.1.37 | hwMplsOamMisMatchRecovery | 0 | 0 | This object indicates that MPLS OAM detected the tunnel received MisMatch alarm end. |
1.3.6.1.4.1.2011.5.25.121.2.1.38 | hwMplsOamMisMerge | 0 | 0 | This object indicates that MPLS OAM detected the tunnel received MisMerge alarm. |
1.3.6.1.4.1.2011.5.25.121.2.1.39 | hwMplsOamMisMergeRecovery | 0 | 0 | This object indicates that MPLS OAM detected the tunnel received MisMerge alarm end. |
1.3.6.1.4.1.2011.5.25.121.2.1.40 | hwMplsOamUnknown | 0 | 0 | This object indicates that MPLS OAM detected the tunnel received Unknown alarm. |
1.3.6.1.4.1.2011.5.25.121.2.1.41 | hwMplsOamUnknownRecovery | 0 | 0 | This object indicates that MPLS OAM detected the tunnel received Unknown alarm end. |
1.3.6.1.4.1.2011.5.25.121.2.1.42 | hwMplsOamBDI | 0 | 0 | This object indicates that MPLS OAM detected the tunnel received BDI alarm. |
1.3.6.1.4.1.2011.5.25.121.2.1.43 | hwMplsOamBDIRecovery | 0 | 0 | This object indicates that MPLS OAM detected the tunnel received BDI alarm end. |
1.3.6.1.4.1.2011.5.25.121.2.1.44 | hwMplsOamFail | 0 | 0 | This object indicates that MPLS OAM detected the tunnel received OAMFAIL alarm. |
1.3.6.1.4.1.2011.5.25.121.2.1.45 | hwMplsOamFailRecovery | 0 | 0 | This object indicates that MPLS OAM detected the tunnel received OAMFAIL alarm end. |
1.3.6.1.4.1.2011.5.25.121.2.1.46 | hwMplsTunnelPrimaryUp | 0 | 0 | This notification indicates that the status of the RSVP-TE Primary LSP changes to Up. |
1.3.6.1.4.1.2011.5.25.121.2.1.47 | hwMplsTunnelPrimaryDown | 0 | 0 | This notification indicates that the status of the RSVP-TE Primary LSP changes to Down. |
1.3.6.1.4.1.2011.5.25.121.2.1.48 | hwMplsTunnelHotstandbyUp | 0 | 0 | This notification indicates that the status of the RSVP-TE Hot-standby LSP changes to Up. |
1.3.6.1.4.1.2011.5.25.121.2.1.49 | hwMplsTunnelHotstandbyDown | 0 | 0 | This notification indicates that the status of the RSVP-TE Hot-standby LSP changes to Down. |
1.3.6.1.4.1.2011.5.25.121.2.1.50 | hwMplsTunnelOrdinaryUp | 0 | 0 | This notification indicates that the status of the RSVP-TE Ordinary LSP changes to Up. |
1.3.6.1.4.1.2011.5.25.121.2.1.51 | hwMplsTunnelOrdinaryDown | 0 | 0 | This notification indicates that the status of the RSVP-TE Ordinary LSP changes to Down. |
1.3.6.1.4.1.2011.5.25.121.2.1.52 | hwMplsTunnelBesteffortUp | 0 | 0 | This notification indicates that the status of the RSVP-TE Best-effort LSP changes to Up. |
1.3.6.1.4.1.2011.5.25.121.2.1.53 | hwMplsTunnelBesteffortDown | 0 | 0 | This notification indicates that the status of the RSVP-TE Best-effort LSP changes to Down. |
1.3.6.1.4.1.2011.5.25.121.2.1.54 | hwMplsTeAutoTunnelDownClear | 0 | 0 | This notification indicates that the TE Auto tunnel Down alarm was cleared. |
1.3.6.1.4.1.2011.5.25.121.2.1.55 | hwMplsTeAutoTunnelPrimaryDownClear | 0 | 0 | This notification indicates that the Down alarm about the primary LSP in the TE Auto tunnel was cleared. |
1.3.6.1.4.1.2011.5.25.121.2.1.56 | hwMplsTunnelBBSwitch | 0 | 0 | This notification indicates that the primary CR-LSP is Down and the Best-effort backup CR-LSP is Up. |
1.3.6.1.4.1.2011.5.25.121.2.1.57 | hwMplsTunnelBBResume | 0 | 0 | This notification indicates that data is switched from the Best-effort backup CR-LSP to the primary CR-LSP. |
1.3.6.1.4.1.2011.5.25.121.2.1.58 | hwMplsExtTunnelDown | 0 | 0 | This notification indicates that the status of te tunnel changes to Down. |
1.3.6.1.4.1.2011.5.25.121.2.1.59 | hwMplsExtTunnelDownClear | 0 | 0 | This notification indicates that the down alarm of te tunnel was cleared. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.121.2.2 | hwMplsTrapObjects | 3 | 3 | None |
1.3.6.1.4.1.2011.5.25.121.2.3 | hwMplsTunnelFrrConfigChange | 0 | 0 | When the trap indicating that TE-Frr configuration of Tunnel is changed is sent, the cause for the change of TE-FRR configurati… |