The srefresh interval. I.e. time difference
between 2 refreshes. The default value is 30000.
Parsed from file HUAWEI-RSVPTE-MIB.mib.txt
Company: huawei
Module: HUAWEI-RSVPTE-MIB
hwRsvpTeIfSrefreshInterval OBJECT-TYPE SYNTAX TimeInterval UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The srefresh interval. I.e. time difference between 2 refreshes. The default value is 30000." ::= { hwRsvpTeIfEntry 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.148.1.5.1.1 | hwRsvpTeIfUdpNbrs | 0 | 0 | The number of neighbors perceived to be using only the RSVP UDP Encapsulation. |
1.3.6.1.4.1.2011.5.25.148.1.5.1.2 | hwRsvpTeIfIpNbrs | 0 | 0 | The number of neighbors perceived to be using only the RSVP IP Encapsulation. |
1.3.6.1.4.1.2011.5.25.148.1.5.1.3 | hwRsvpTeIfNbrs | 0 | 0 | The number of neighbors currently perceived; this will exceed hwRsvpTeIfIpNbrs + hwRsvpTeIfUdpNbrs by the number of neighbors… |
1.3.6.1.4.1.2011.5.25.148.1.5.1.4 | hwRsvpTeIfRefreshBlockadeMultiple | 0 | 0 | The value of the RSVP value 'Kb', Which is the minimum number of refresh intervals that blockade state will last once ente… |
1.3.6.1.4.1.2011.5.25.148.1.5.1.5 | hwRsvpTeIfRefreshMultiple | 0 | 0 | The value of the RSVP value 'K', which is the number of refresh intervals which must elapse (minimum) before a PATH or RESV m… |
1.3.6.1.4.1.2011.5.25.148.1.5.1.6 | hwRsvpTeIfTtl | 0 | 0 | The value of SEND_TTL used on this interface for messages this node originates. If set to zero, the node determines the TT… |
1.3.6.1.4.1.2011.5.25.148.1.5.1.7 | hwRsvpTeIfRefreshInterval | 0 | 0 | The value of the RSVP value 'R', which is the minimum period between refresh transmissions of a given PATH or RESV message on an… |
1.3.6.1.4.1.2011.5.25.148.1.5.1.8 | hwRsvpTeIfRouteDelay | 0 | 0 | The approximate period from the time a route is changed to the time a resulting message ap- pears on the interface. The defaul… |
1.3.6.1.4.1.2011.5.25.148.1.5.1.9 | hwRsvpTeIfEnabled | 0 | 0 | Its value is always TRUE, if RSVP is enabled on this Interface. |
1.3.6.1.4.1.2011.5.25.148.1.5.1.10 | hwRsvpTeIfUdpRequired | 0 | 0 | If TRUE, manual configuration forces the use of UDP encapsulation on the interface. If FALSE, UDP encapsulation is only u… |
1.3.6.1.4.1.2011.5.25.148.1.5.1.11 | hwRsvpTeIfStatus | 0 | 0 | 'active' on interfaces that are configured for RSVP. |
1.3.6.1.4.1.2011.5.25.148.1.5.1.12 | hwRsvpTeIfHelloEnabled | 0 | 0 | If TRUE, RSVPTE hello is enabled on this Interface. If FALSE, RSVPTE hello is not enabled on this interface |
1.3.6.1.4.1.2011.5.25.148.1.5.1.13 | hwRsvpTeIfSrefreshEnabled | 0 | 0 | If TRUE, srefresh is enabled on this interface. If FALSE, srefresh is not enabled on this interface. |
1.3.6.1.4.1.2011.5.25.148.1.5.1.15 | hwRsvpTeIfRetranIncDelta | 0 | 0 | Delta governs the speed with which the sender increases the retransmission interval. The ratio of two successive retransmission … |
1.3.6.1.4.1.2011.5.25.148.1.5.1.16 | hwRsvpTeIfRetranInterval | 0 | 0 | The retransmission interval. The default value is 500. |
1.3.6.1.4.1.2011.5.25.148.1.5.1.17 | hwRsvpTeIfAuthEnabled | 0 | 0 | If TRUE, authentication is enabled on this interface. If FALSE, authentication is not enabled on this interface. |
1.3.6.1.4.1.2011.5.25.148.1.5.1.18 | hwRsvpTeIfAuthEncrypted | 0 | 0 | This states that authentication key is encrypted or not. |
1.3.6.1.4.1.2011.5.25.148.1.5.1.19 | hwRsvpTeIfAuthHandshake | 0 | 0 | Handshaking is enabled authentications. |
1.3.6.1.4.1.2011.5.25.148.1.5.1.20 | hwRsvpTeIfAuthLifeTime | 0 | 0 | Authentication life time. The default value is 1800000. |
1.3.6.1.4.1.2011.5.25.148.1.5.1.21 | hwRsvpTeIfAuthKey | 0 | 0 | Authentication key, used for authentication processing. |
1.3.6.1.4.1.2011.5.25.148.1.5.1.22 | hwRsvpTeIfWindowSize | 0 | 0 | Administrators can specify a message window corresponding to the worst case reordering behavior. For example, one might specify … |