hwPoeNotification OBJECT IDENTIFIER ::= { hwPoeMIB 40 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.195.40.1 | hwPoeDimmError | 0 | 0 | This object indicates the Dimm chip error. |
1.3.6.1.4.1.2011.5.25.195.40.2 | hwPoePowerOff | 0 | 0 | This object indicates a PD connected to an interface is powered off. |
1.3.6.1.4.1.2011.5.25.195.40.3 | hwPoePowerOn | 0 | 0 | This object indicates that a PD connected to an interface is powered on. |
1.3.6.1.4.1.2011.5.25.195.40.4 | hwPoeSlotPowerOverload | 0 | 0 | This object indicates that the power consumed by a slot exceeds the threshold. |
1.3.6.1.4.1.2011.5.25.195.40.5 | hwPoeSlotPowerOverloadResume | 0 | 0 | This object indicates that the power consumed by a slot does not exceed the threshold. |
1.3.6.1.4.1.2011.5.25.195.40.6 | hwPoePdPowerOverload | 0 | 0 | This object indicates the power consumed by a PD connected to an interface exceeds the threshold. |
1.3.6.1.4.1.2011.5.25.195.40.7 | hwPoePdPowerOverloadResume | 0 | 0 | This object indicates that the power consumed by a PD connected to an interface does not exceed the threshold. |
1.3.6.1.4.1.2011.5.25.195.40.8 | hwPoePdConnected | 0 | 0 | This object indicates that a PD is connected to an interface. |
1.3.6.1.4.1.2011.5.25.195.40.9 | hwPoePdDisconnected | 0 | 0 | This object indicates that a PD is disconnected from an interface. |
1.3.6.1.4.1.2011.5.25.195.40.10 | hwPoePdClassInvalid | 0 | 0 | This object indicates that a PD of an invalid class is detected. |
1.3.6.1.4.1.2011.5.25.195.40.11 | hwPoePdClassOvercurrent | 0 | 0 | This object indicates that overcurrent occurs during the classification of a PD. |
1.3.6.1.4.1.2011.5.25.195.40.12 | hwPoePdPowerOvercurrent | 0 | 0 | This object indicates that overcurrent occurs during the powering of a PD. |
1.3.6.1.4.1.2011.5.25.195.40.13 | hwPoePdPowerOvercurrentResume | 0 | 0 | This object indicates that overcurrent is rectified. |
1.3.6.1.4.1.2011.5.25.195.40.14 | hwPoePowerOnFail | 0 | 0 | This object indicates that a PD fails to be powered on. |
1.3.6.1.4.1.2011.5.25.195.40.15 | hwPoePowerOffCurrentLimits | 0 | 0 | This object indicates that a PD is powered off because its current meets or exceeds the limit of current. |
1.3.6.1.4.1.2011.5.25.195.40.16 | hwPoePdPriorityDifferent | 0 | 0 | This object indicates that the priority of PD is different from the port. |
1.3.6.1.4.1.2011.5.25.195.40.17 | hwPoePowerOverUtilizationThreshold | 0 | 0 | This object indicates that the PSE is overdrawing power. |
1.3.6.1.4.1.2011.5.25.195.40.18 | hwPoePowerOverUtilizationThresholdResume | 0 | 0 | This object indicates that the PSE is not overdrawing power. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.195.1 | hwPoeGlobalObjects | 3 | 3 | None |
1.3.6.1.4.1.2011.5.25.195.2 | hwPoeSlotTable | 1 | 13 | This object indicates the slot configuration table of POE. |
1.3.6.1.4.1.2011.5.25.195.3 | hwPoePortTable | 1 | 16 | This object indicates the table that contains the configuration parameters of a POE interface. One entry corresponds to a POE i… |
1.3.6.1.4.1.2011.5.25.195.39 | hwPoeTrapObjects | 5 | 5 | None |
1.3.6.1.4.1.2011.5.25.195.100 | hwPoeConformance | 1 | 6 | None |