Each row defines some commmands to a single process of the IS-IS protocol existing on the system.
These commands belong to the IS-IS process.
Parsed from file HUAWEI-ISIS-CONF-MIB.mib.txt
Company: huawei
Module: HUAWEI-ISIS-CONF-MIB
Vendor: Huawei
Module: HUAWEI-ISIS-MIB (huawei-isis.mib)
Type: TABULAR
Access: read-only
Syntax: OperState
Automatically extracted from www.mibdepot.com
hwIsisProcBaseEntry OBJECT-TYPE SYNTAX HwIsisProcBaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row defines some commmands to a single process of the IS-IS protocol existing on the system. These commands belong to the IS-IS process." INDEX { hwIsisProcIdIndex } ::= { hwIsisProcBaseTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.1 | hwIsisProcIdIndex | 0 | 0 | The value of this object identifies the IS-IS process ID. The value ranges from 1 to 65535. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.2 | hwIsisProcVpnName | 0 | 0 | The value of this object identifies the name of the IPv4 VPN instance bound to the IS-IS process. The value ranges from 0 to 31. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.3 | hwIsisProcVpn6Name | 0 | 0 | The value of this object identifies the name of the IPv6 VPN instance bound to the IS-IS process. The value ranges from 0 to 31. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.4 | hwIsisProcAreaAuthType | 0 | 0 | The value of this object identifies the type of IS-IS area authentication. null (0): Area authentication is not configured. md5 (… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.5 | hwIsisProcAreaAuthPasswordName | 0 | 0 | This object indicates the password of IS-IS area authentication. The password is a string of characters. If the IS-IS area authe… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.6 | hwIsisProcAreaAuthPacketAuthMode | 0 | 0 | The value of this object identifies the packet authentication mode of IS-IS area authentication: none (0): Authentication mode i… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.7 | hwIsisProcAreaAuthCode | 0 | 0 | The value of this object identifies the code of area authentication. none (0): The authentication code is not configured. osi (10… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.8 | hwIsisProcDomainAuthType | 0 | 0 | The value of this object identifies the type of IS-IS router domain authentication. null (0): Domain authentication is not confi… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.9 | hwIsisProcDomainAuthPasswordName | 0 | 0 | This object indicates the password of IS-IS routing domain authentication. The password is a string of characters. If the IS-IS … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.10 | hwIsisProcDomainAuthPacketAuthMode | 0 | 0 | The value of this object identifies the packet authentication mode of IS-IS route domain authentication. none (0): Authenticatio… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.11 | hwIsisProcDomainAuthCode | 0 | 0 | The value of this object identifies the code of domain authentication. none (0): The authentication code is not configured. osi (… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.12 | hwIsisProcLevel | 0 | 0 | The value of this object identifies the level of the IS-IS process. level1 (1): indicates level 1. level2 (2): indicates level 2.… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.13 | hwIsisProcL1FlashFloodCount | 0 | 0 | The value of this object identifies the counter of level-1 LSPs on the interface. The value is an integer ranging from 0 to 15. … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.14 | hwIsisProcL1FlashFloodInterval | 0 | 0 | The value of this object identifies the intervals for level-1 LSP flooding. The value ranges from 10 to 50000, in milliseconds. … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.15 | hwIsisProcL2FlashFloodCount | 0 | 0 | The value of this object identifies the counter of level-2 LSPs on the interface. The value is an integer ranging from 0 to 15. … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.16 | hwIsisProcL2FlashFloodInterval | 0 | 0 | The value of this object identifies the intervals for level-2 LSP flooding. The value ranges from 10 to 50000 in milliseconds. T… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.17 | hwIsisProcLogPeerChange | 0 | 0 | Generates a log when the status of the peer changes. null (0): not configured enabledwithouttopology (1): IPv4 topology enabledwit… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.18 | hwIsisProcTimerRefresh | 0 | 0 | The value of this object identifies the timer of LSP refreshing. The value ranges from 1 to 65534, in seconds. The default valu… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.19 | hwIsisProcTimerMaxAge | 0 | 0 | The value of this object identifies the maximum Keepalive time of the LSP. The value ranges from 2 to 65535, in seconds. The de… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.20 | hwIsisProcL1TimerLspGenMaxInterval | 0 | 0 | The value of this object identifies the timer for the maximum delay of level-1 LSPs with the same LSP ID. The value ranges from … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.21 | hwIsisProcL1TimerLspGenInitInterval | 0 | 0 | The value of this object identifies the delay timer that initially triggers a level-1 LSP. The value ranges from 0 to 60000, in … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.22 | hwIsisProcL1TimerLspGenIncrInterval | 0 | 0 | The value of this object identifies the delay timer for generating two level-1 LSPs with the same LSP ID. The value ranges from … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.23 | hwIsisProcL2TimerLspGenMaxInterval | 0 | 0 | The value of this object identifies the timer for the maximum delay of Level-2 LSPs with the same LSP ID. The value ranges from … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.24 | hwIsisProcL2TimerLspGenInitInterval | 0 | 0 | The value of this object identifies the delay timer that initially triggers a Level-2 LSP. The value ranges from 1 to 60000, in… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.25 | hwIsisProcL2TimerLspGenIncrInterval | 0 | 0 | The value of this object identifies the delay timer for generating two Level-2 LSPs with the same LSP ID. The value ranges from … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.26 | hwIsisProcTimerSPFMaxInterval | 0 | 0 | The value of this object identifies the maximum intervals for SPF calculation. The value ranges from 1 to 120, in seconds. By de… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.27 | hwIsisProcTimerSPFInitInterval | 0 | 0 | The value of this object identifies the delay timer for initial SPF calculation. The value ranges from 1 to 60000, in millisecon… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.28 | hwIsisProcTimerSPFIncrInterval | 0 | 0 | The value of this object identifies the incremental delay timer for two SPF calculations. The value ranges from 1 to 60000, in m… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.29 | hwIsisProcCostStyle | 0 | 0 | Configures the cost type of the IS-IS process: narrow (1): the narrow type narrowcompatible (2): the narrow-compatible type compat… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.30 | hwIsisProcDynamicName | 0 | 0 | Configures the name of the IS-IS dynamic host. The value is a string of 1 to 64 characters. When the length is 0, the configured… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.31 | hwIsisProcGREnabled | 0 | 0 | Whether to enable IS-IS GR. true (1): enables IS-IS GR. false (2): does not enable IS-IS GR. By default, IS-IS GR is disabled. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.32 | hwIsisProcGRInterval | 0 | 0 | The value of this object identifies the maximum intervals for enabling GR. The value ranges from 0 to 1800, in seconds. By defau… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.33 | hwIsisProcGRSuppresSAEnabled | 0 | 0 | This object indicates that the SA bit in the sent Hello packet is set to 1 after the GR-enabled device is started: true (1): ena… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.34 | hwIsisProcTEEnableLevel | 0 | 0 | Enables IS-IS TE. none (0): does not enable IS-IS TE. level1 (1): enables level-1 TE. level2 (2): enables level-2 TE. level12 (3): … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.35 | hwIsisProcBFDEnabled | 0 | 0 | Whether to enable BFD on each interface. true (1): enables BFD on each interface. false (2): does not enable BFD on each interfac… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.36 | hwIsisProcBFDFrrBindEnabled | 0 | 0 | Enables BFD-FRR binding on each interface. true (1): enables BFD-FRR binding on each interface. false (2): does not enable BFD-FR… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.37 | hwIsisProcBFDMinTxInterval | 0 | 0 | The value of this object identifies the minimum interval for sending BFD packets. If isis binding to vpn and ipv4-family not ena… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.38 | hwIsisProcBFDMinRecvInteval | 0 | 0 | The value of this object identifies the minimum interval for receiving BFD packets. If isis binding to vpn and ipv4-family not e… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.39 | hwIsisProcBFDMultiplier | 0 | 0 | The value of this object identifies the local detection multiplier. The value ranges from 1 to 255. If isis binding to vpn and i… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.40 | hwIsisProcIPv6EnableTopologyType | 0 | 0 | This objects indicates whether the IPv6 topology is enabled for the IS-IS process: disable(0): disables the IPv6 topology of the… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.1.41 | hwIsisProcRowStatus | 0 | 0 | This object supports settings of two values. createAndGo(4): A row is created. destroy(6): A row is deleted. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.2 | hwIsisCircLevel | 0 | 0 | The level of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.3 | hwIsisCircL1TransPassword | 0 | 0 | The value to be used as the Authentication Key in Level 1 and Point-to-Point hello packets while transmitting, whenever the corre… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.4 | hwIsisCircL1RecvPassword1 | 0 | 0 | The value to be used as the Authentication Key in Level 1 and Point-to-Point hello packets that are receivied from the neighborin… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.5 | hwIsisCircL1RecvPassword2 | 0 | 0 | The value to be used as the Authentication Key in Level 1 and Point-to-Point hello packets that are receivied from the neighborin… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.6 | hwIsisCircL1RecvPassword3 | 0 | 0 | The value to be used as the Authentication Key in Level 1 and Point-to-Point hello packets that are receivied from the neighborin… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.7 | hwIsisCircL2TransPassword | 0 | 0 | The value to be used as the Authentication Key in Level 2 and Point-to-Point hello packets while transmitting, whenever the corre… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.8 | hwIsisCircL2RecvPassword1 | 0 | 0 | The value to be used as the Authentication Key in Level 1 and Point-to-Point hello packets that are receivied from the neighborin… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.9 | hwIsisCircL2RecvPassword2 | 0 | 0 | The value to be used as the Authentication Key in Level 1 and Point-to-Point hello packets that are receivied from the neighborin… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.10 | hwIsisCircL2RecvPassword3 | 0 | 0 | The value to be used as the Authentication Key in Level 1 and Point-to-Point hello packets that are receivied from the neighborin… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.11 | hwIsisCircVersionSkews | 0 | 0 | The number of PDUs of different version was received |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.12 | hwIsisCircStateChanges | 0 | 0 | The number of times the circuit has changed the state. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.1.13 | hwIsisCircAreaMismatches | 0 | 0 | The number PDUs from an unrecognised area was received |