The value of this object identifies the interval for waiting to clear the overload bit after the system is started.
The value ranges from 5 to 86400, in seconds. The default value is 600s.
Parsed from file HUAWEI-ISIS-CONF-MIB.mib.txt
Company: huawei
Module: HUAWEI-ISIS-CONF-MIB
hwIsisProcOnStartInterval OBJECT-TYPE SYNTAX Integer32 (0 | 5..86400) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the interval for waiting to clear the overload bit after the system is started. The value ranges from 5 to 86400, in seconds. The default value is 600s." DEFVAL { 600 } ::= { hwIsisProcMTExtEntry 21 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.1 | hwIsisIpTypeIndex | 0 | 0 | This object indicates the IP protocol type: ipv4(1): indicates IPv4. ipv6(2): indicates IPv6. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.2 | hwIsisMTIdIndex | 0 | 0 | The value of this object identifies the MT ID. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.3 | hwIsisMTName | 0 | 0 | This object indicates the name of the topology to be bound to an IS-IS process. The value is a string of 1 to 31 characters. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.4 | hwIsisProcDefRoutAdvType | 0 | 0 | This object is used to set the mode in which default routes are advertised: null(0): indicates that default routes are not adver… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.5 | hwIsisProcDefRoutAdvPolicyName | 0 | 0 | This object indicates the routing policy name. The name is a string of 0 to 40 characters. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.6 | hwIsisProcDefRoutAdvCost | 0 | 0 | This object is used to set the cost of a default route. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.7 | hwIsisProcDefRoutAdvTag | 0 | 0 | This object is used to set the administrative tag of a default route. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.8 | hwIsisProcDefRoutAdvLevel | 0 | 0 | This object is used to set the level of a default route: level1(1): indicates Level-1. level2(2): indicates Level-2. level12(3): i… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.9 | hwIsisProcDefRoutAdvAvoidLearnEnabled | 0 | 0 | This object indicates whether an IS-IS process is prevented from learning default routes or adding them to the routing table: tr… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.10 | hwIsisProcL1CircuitCost | 0 | 0 | Global level-1 cost for all the interfaces. If the costStyle of the process is wide or widecompatible, the range of this value i… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.11 | hwIsisProcL2CircuitCost | 0 | 0 | Global level-2 cost for all the interfaces. If the costStyle of the process is wide or widecompatible, the range of this value i… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.12 | hwIsisProcPrefValue | 0 | 0 | This object is used to set the preference of an IS-IS route. The value ranges from 1 to 255, and the default value is 15. If isi… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.13 | hwIsisProcPrefPolicyName | 0 | 0 | This object indicates the name of the routing policy used for route filtering. The name is a string of 0 to 40 characters. Zero-… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.14 | hwIsisProcMaxLoadBalance | 0 | 0 | This object is used to set the number of equal-cost routes. The range and the default value depend on license. If isis binding to… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.15 | hwIsisProcL1CircuitDefaultTag | 0 | 0 | This object is used to set the default administrative tag of an IS-IS Level-1 route. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.16 | hwIsisProcL2CircuitDefaultTag | 0 | 0 | This object is used to set the default administrative tag of an IS-IS Level-2 route. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.17 | hwIsisProcBandWidthReference | 0 | 0 | This object is used to set the reference bandwidth. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.18 | hwIsisProcAutoCostEnabled | 0 | 0 | This object indicates whether automatic interface cost calculation is enabled: true(1): indicates that automatic interface cost … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.19 | hwIsisProcSetOverLoad | 0 | 0 | This object indicates whether a device is enabled to notify its neighbors that its status is Overload: disable (0): indicates th… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.20 | hwIsisProcSetOverLoadAllowRoute | 0 | 0 | This object indicates that the type of routes to be advertised when a device is in the Overload state: null(0): indicates that n… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.22 | hwIsisProcOnStartStartFromPeer | 0 | 0 | This object indicates the system ID of a neighbor. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.23 | hwIsisProcOnStartFromPeerInterval | 0 | 0 | The value of this object identifies the maximum interval for waiting to clear the overload bit after the system is started and t… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.24 | hwIsisProcOnStartWaitForBgpEnabled | 0 | 0 | This object indicates whether the function of waiting for BGP convergence is enabled: true(1): indicates that the function of wa… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.3.1.25 | hwIsisProcMTStatus | 0 | 0 | This object indicates the row status of this table: createAndGo(4): indicates that a row is created. destroy(6): indicates that a… |